Originally Posted by ChrisSlicks Looking good Mike! How are you putting together the brake ducting? I really need to do something myself. Thanks! I am not 100% sure yet how
|
|
LinkBack | Thread Tools | Display Modes |
06-06-2011, 12:37 PM | #466 (permalink) |
The370Z.com Sponsor
|
Thanks! I am not 100% sure yet how I am going to go about doing the brake ducts yet to be honest. I will be sure to document whatever I end up doing though.
__________________
MikeBonanni.com Twitter: http://www.twitter.com/MikeBonanni Facebook: http://www.facebook.com/MBonanni36 Function > Form |
06-07-2011, 12:17 PM | #470 (permalink) |
The370Z.com Sponsor
|
Nope.
A few reasons. One, I have liked these pads on other cars I have driven so I figured I would try something different. The Carbotechs have a more aggressive initial bite than the Hawks but the Hawks have a different torque curve. I am hoping that the less aggressive initial bite may aide in avoiding "ice mode" but there's only one way to find out! Since I will be running street tires, I think the less aggressive initial bite will be beneficial while the temperature range and torque curve will still be plenty. And perhaps the most important reason is budget as they are a sponsor this year haha. I wouldn't have taken them on as a sponsor though if I didn't think they would work as good or better than the Carbotechs.
__________________
MikeBonanni.com Twitter: http://www.twitter.com/MikeBonanni Facebook: http://www.facebook.com/MBonanni36 Function > Form |
06-07-2011, 01:26 PM | #471 (permalink) |
A True Z Fanatic
Join Date: Mar 2009
Location: North East
Posts: 6,203
Drives: 09 370Z Sport M6
Rep Power: 653 |
Which compound did you go with DTC-70 or DTC-60? I'm with you, I like medium bite pads in the 0.45 to 0.5 range like these. I haven't had any ice mode issues with pads in that range and I also like to make sure they have an MOT of 1400F or above (which these do of course).
__________________
Hotchkis ARB | Stillen CAI | Art Pipes | Berk CBE | Stillen AP Racing Brakes | AE Performance Oil Cooler | BC Racing ER Coilovers | Doran Control Arms |
06-07-2011, 01:40 PM | #473 (permalink) | |
The370Z.com Sponsor
|
Quote:
__________________
MikeBonanni.com Twitter: http://www.twitter.com/MikeBonanni Facebook: http://www.facebook.com/MBonanni36 Function > Form |
|
06-07-2011, 01:48 PM | #474 (permalink) |
A True Z Fanatic
Join Date: Mar 2009
Location: North East
Posts: 6,203
Drives: 09 370Z Sport M6
Rep Power: 653 |
This is true. If I run the same compound front and rear then the rear can get a little squirmy under heavy braking. ABS keeps it in check but if you like to brake in straight lines go with the one step down for the rear.
__________________
Hotchkis ARB | Stillen CAI | Art Pipes | Berk CBE | Stillen AP Racing Brakes | AE Performance Oil Cooler | BC Racing ER Coilovers | Doran Control Arms |
06-14-2011, 04:30 PM | #475 (permalink) |
The370Z.com Sponsor
|
Corner balanced the 370Z today. She's a fat pig for sure. 3500 lbs. race weight with me in it and full tank of fuel...and that's with the spare tire/tools/trunk plastics removed. Yes, I corner balanced with a fuel tank of fuel on purpose since our wonderful cars have to run a full tank at all times to avoid fuel starvation.
__________________
MikeBonanni.com Twitter: http://www.twitter.com/MikeBonanni Facebook: http://www.facebook.com/MBonanni36 Function > Form |
06-14-2011, 09:33 PM | #476 (permalink) |
A True Z Fanatic
Join Date: Jul 2010
Location: Newport Beach
Posts: 3,900
Drives: 2010 370Z/Saab 900se
Rep Power: 432 |
The Z looks great Mike, I have been following your blog and saw you pop up a few times on speedhunter and you have been going very well this year! Keep up the good work, do you have any ideas to tackle fuel starvation?
__________________
-320whp / 259wftlbs- SP Rays -- RE-11s -- SpecialtyZ Tune -- Swift Springs -- Stillen 25R Oil Cooler -- Stillen G3 Intakes -- Berk HFCs -- F.I. 12" CBE -- Stillen Sway Bars -- Es14 Spring -- INGS+1 lip -- CF Spoiler -- GTR Start Button -- VLED Parking Lights -- PWJDM V2 shift knob |
06-15-2011, 11:41 AM | #477 (permalink) |
The370Z.com Sponsor
|
Thanks! Yes this year has been great so far. As for the fuel starvation, no I have not thought of any solutions that would be easy and realistic for a daily driver unfortunately. Leaving it up to the aftermarket to come up with that one.
__________________
MikeBonanni.com Twitter: http://www.twitter.com/MikeBonanni Facebook: http://www.facebook.com/MBonanni36 Function > Form |
06-15-2011, 03:35 PM | #479 (permalink) |
The370Z.com Sponsor
|
Plenty of times, but that task is beyond my level of mechanical ability unfortunately haha. Not to mention, to do it properly in a way that it would pass a tech inspection for a reputable event, and to do it in a way that is truly safe in a car that has no separate trunk area is harder than it sounds. The driver needs to be 100% protected from any fire danger from the tank. Easy to do in a car that has a partition between the trunk area and the cabin, not so easy in the 370Z. Can it be done, yes...by me personally...hell no.
__________________
MikeBonanni.com Twitter: http://www.twitter.com/MikeBonanni Facebook: http://www.facebook.com/MBonanni36 Function > Form |
06-16-2011, 06:26 PM | #480 (permalink) |
The370Z.com Sponsor
|
Alignment done! Hopefully brake ducts and wheel studs will be done this weekend. First track day will be July 10th at Buttonwillow! Will also be at Buttonwillow on July 9th offering instruction with a group called Speed District if anyone is interested.
__________________
MikeBonanni.com Twitter: http://www.twitter.com/MikeBonanni Facebook: http://www.facebook.com/MBonanni36 Function > Form |
Bookmarks |
|
|