Mr. G. Brettin's Slow Motion Leg Hump

gbrettin · 01-28-2021, 12:31 PM

Quote:

Originally Posted by Rusty

I don't see a drain plug in the front section of the oil pan. By the looks of that front section. You will have about a quart of oil laying in it.

Yeah. That's on order. double drain. The oil pan also has to come off to have a section coped out for the starter bolt. There's no way im pulling the engine, pan and then starter just for a change.

Rusty · 01-28-2021, 04:19 PM

Quote:

Originally Posted by gbrettin

Yeah. That's on order. double drain. The oil pan also has to come off to have a section coped out for the starter bolt. There's no way im pulling the engine, pan and then starter just for a change.

Be thankful that you're not working on a Bugatti. Think there is around 18 or so oil drain plugs.

gbrettin · 01-28-2021, 05:54 PM

Just got this image in from the powder coater.

gbrettin · 02-02-2021, 09:03 AM

My buddy Kirk is working on a fender and bumper badge for my car. A billet option would be bad a$$... but it's in early early development. So, you get to see the first 3d printed potato photo of a badge.

The pan was fixed to allow starter removal. An additional drain will be added and a -16 oil drain in the front. Back off to the welder. I also gave him my swirl pots to have -16 bungs welded on. This also reminds me that a -16 bung needs to be welded onto my radiator.

To make sure no aluminum burrs go in the intake, I hit it with "uncle bumble fcuk", 180grit dingle ball that went balls deep. I still need to go back and clean up the middle section with a long die grinder bit.

To keep the difficult stuff to a minimum, I decided to clean up the intake. It was scuffed with a red pad for a few hours and then scuffed with a black pad for a few hours. I then took the intake home and hit it with Eagle One Never Dull ... which made a mirror finish. I'm not quite done buffing it. Also, I didn't think it would go mirror that fast. Not that 5hours of cleaning is fast.

Lastly I decided to clean up the k member with some degreaser since it was out. Then me... being me... I ordered some Moog wheel hub assemblies because it's 95% disassembled. Then... the hampster kicked into over drive and thought it would be a good idea to reach out to SPL to see if they want to do a light sponsorship (I offered to pay for the parts, I don't expect free stuff). I offered them 10's of views with my YouTube channel and IG posts. ... pretty much what I do with all my stuff. I'm not a great sales man am I? Oh, I also gave them this link to this page So they will also see how deep the rabbit hole goes.

SPL - If you are reading this. Please look at the tags at the bottom of this page for additional information.

Happy Tuesday everyone.

Rusty · 02-02-2021, 11:39 AM

I would stay away from Moog parts. They don't have a good reputation anymore. The guys on the Power Wagon forum won't use anything with the word Moog on it.

To really polish the aluminum. You should try Flitz polish. I think it's better then Never-Dull. I have a 2 lb can of it.

https://www.amazon.com/Flitz-Plastic...xpY2s9dHJ1ZQ==

gbrettin · 02-02-2021, 02:44 PM

Quote:

Originally Posted by Rusty

I would stay away from Moog parts. They don't have a good reputation anymore. The guys on the Power Wagon forum won't use anything with the word Moog on it.

To really polish the aluminum. You should try Flitz polish. I think it's better then Never-Dull. I have a 2 lb can of it.

Well shoot. The wheel hubs are on their way already. I guess we'll see how they do.

I need to hit the intake another time yet. I was burning out last night. I'll try making my Never-Dull work because I already own it. lol. but! thanks for that heads up.

Ghostvette · 02-02-2021, 02:57 PM

Quote:

Originally Posted by gbrettin

Well shoot. The wheel hubs are on their way already. I guess we'll see how they do.

I need to hit the intake another time yet. I was burning out last night. I'll try making my Never-Dull work because I already own it. lol. but! thanks for that heads up.

Never-Dull works well on brass belt buckles. I used to use that stuff while I was on active duty, until I bought anodized buckles.

Beck-Arnley for the hubs...

Rusty · 02-02-2021, 04:38 PM

Quote:

Originally Posted by Ghostvette

Never-Dull works well on brass belt buckles. I used to use that stuff while I was on active duty, until I bought anodized buckles.

Beck-Arnley for the hubs...

SKF bearing if you can find them.

gbrettin · 02-03-2021, 06:56 AM

IG@gbrettin

Oil pan on and finished! Double drain, -16 turbo drain, -10 feed and send for remote oil filter/cooler/Accusump and two studs added to the block so that I can use two nuts in a tight location. WHEW! That's a lot for an aluminum oil pan. Huge shot out to @independenteng for making this happen

------------------

The pan is finally done and my swirl pots all have -16 bungs. That's all I have to say about that.

gbrettin · 02-03-2021, 09:00 PM

MORE video for all of you, and the edits are terrible too. You get what you pay for... so shut up and enjoy the show.

gbrettin · 02-05-2021, 04:02 PM

This just in from the powder coater and hot off Amazon truck.

Looks like I have some work to do tomorrow... Push rod measurements, Wheel bearing and dampener removal/install. Of which only 1 will likely get started... lol

I'm going with pushrods. So I can order them

-Edit

I'm for sure going with that accent color. It looks amazing in person and it will look awesome on the turbo housing.

--Edit Edit

The wheel bearings are being done because "since I'm in there..." That would be a budget killer if I followed a budget. I'd prefer not to.

gbrettin · 02-07-2021, 04:07 PM

I've been a busy beaver the last few days.
-Swirlpots with AN bungs have been welded on.
-Ground down some aluminum inside the intake.
-Assembled new ATI Damper
-Messed up assembly so I had to press off and reassemble. The bolt holes didn't line up
-Figured out that the old ARP damper bolt was too long.
-Pulled old damper off.
-Disassembled coil bracket mount for powder coating (going to be Yellow/green)
-Installed front wheel hub assembly.

I am going to do a rebuild and powder coat my calipers. Rusty, I know you have done it a few times. Where do you get the rebuild kits from?

Last picture shows my brake duct not on the car after assembly. cool...

First pictures show the powder coating on the car. Looks damn good in person! The camera can't keep up with the intensity of the Yellow/Green. The calipers will be coated the same yellow/green. I think the wheels for the car will be the Nismo Club Sport. If they still make them when I get close to being done.

Rusty · 02-07-2021, 04:49 PM

Here's the KITS you need from Z1. They have the o-ring for between the halves.

https://www.z1motorsports.com/brakes...it-p-6891.html

gbrettin · 02-08-2021, 06:50 PM

Quote:

Originally Posted by Rusty

Here's the KITS you need from Z1. They have the o-ring for between the halves.

https://www.z1motorsports.com/brakes...it-p-6891.html

Thanks dude.

Also. You have done an SPL upgrade on your lower control arms right? Worth it?

Rusty · 02-08-2021, 07:40 PM

Quote:

Originally Posted by gbrettin

Thanks dude.

Also. You have done an SPL upgrade on your lower control arms right? Worth it?

My 2 cents on the lower bushings. Yea, they are worth it. You be surprised at how much freer the suspension moves with the SPL bearings.

01-28-2021, 05:54 PM	#633 (permalink)
gbrettin A True Z Fanatic Join Date: Oct 2010 Location: Portage, MI Posts: 2,279 Drives: Tricycle Rep Power: 589151	Just got this image in from the powder coater. Rusty, Hotrodz, madwi and 2 others like this.

02-02-2021, 09:03 AM	#634 (permalink)
gbrettin A True Z Fanatic Join Date: Oct 2010 Location: Portage, MI Posts: 2,279 Drives: Tricycle Rep Power: 589151	My buddy Kirk is working on a fender and bumper badge for my car. A billet option would be bad a$$... but it's in early early development. So, you get to see the first 3d printed potato photo of a badge. The pan was fixed to allow starter removal. An additional drain will be added and a -16 oil drain in the front. Back off to the welder. I also gave him my swirl pots to have -16 bungs welded on. This also reminds me that a -16 bung needs to be welded onto my radiator. To make sure no aluminum burrs go in the intake, I hit it with "uncle bumble fcuk", 180grit dingle ball that went balls deep. I still need to go back and clean up the middle section with a long die grinder bit. To keep the difficult stuff to a minimum, I decided to clean up the intake. It was scuffed with a red pad for a few hours and then scuffed with a black pad for a few hours. I then took the intake home and hit it with Eagle One Never Dull ... which made a mirror finish. I'm not quite done buffing it. Also, I didn't think it would go mirror that fast. Not that 5hours of cleaning is fast. Lastly I decided to clean up the k member with some degreaser since it was out. Then me... being me... I ordered some Moog wheel hub assemblies because it's 95% disassembled. Then... the hampster kicked into over drive and thought it would be a good idea to reach out to SPL to see if they want to do a light sponsorship (I offered to pay for the parts, I don't expect free stuff). I offered them 10's of views with my YouTube channel and IG posts. ... pretty much what I do with all my stuff. I'm not a great sales man am I? Oh, I also gave them this link to this page So they will also see how deep the rabbit hole goes. SPL - If you are reading this. Please look at the tags at the bottom of this page for additional information. Happy Tuesday everyone. JARblue, Rusty, Hotrodz and 4 others like this. Last edited by gbrettin; 02-02-2021 at 09:08 AM.

02-02-2021, 11:39 AM	#635 (permalink)
Rusty Ronin Samurai - Assassin Join Date: Dec 2011 Location: Fayettenam,Pennsyltucky Age: 68 Posts: 35,165 Drives: 2011 Nismo GM 6M Rep Power: 2684437	I would stay away from Moog parts. They don't have a good reputation anymore. The guys on the Power Wagon forum won't use anything with the word Moog on it. To really polish the aluminum. You should try Flitz polish. I think it's better then Never-Dull. I have a 2 lb can of it. https://www.amazon.com/Flitz-Plastic...xpY2s9dHJ1ZQ== gbrettin, Hotrodz and BettyZ like this. __________________ 浪人 - 殺し屋 "The Difficult Anytime, The Impossible By Appointment Only" http://www.the370z.com/members-370z-...o-journal.html

02-03-2021, 06:56 AM	#639 (permalink)
gbrettin A True Z Fanatic Join Date: Oct 2010 Location: Portage, MI Posts: 2,279 Drives: Tricycle Rep Power: 589151	IG@gbrettin Oil pan on and finished! Double drain, -16 turbo drain, -10 feed and send for remote oil filter/cooler/Accusump and two studs added to the block so that I can use two nuts in a tight location. WHEW! That's a lot for an aluminum oil pan. Huge shot out to @independenteng for making this happen ------------------ The pan is finally done and my swirl pots all have -16 bungs. That's all I have to say about that. JARblue, Rusty, Hotrodz and 3 others like this.

02-03-2021, 09:00 PM	#640 (permalink)
gbrettin A True Z Fanatic Join Date: Oct 2010 Location: Portage, MI Posts: 2,279 Drives: Tricycle Rep Power: 589151	MORE video for all of you, and the edits are terrible too. You get what you pay for... so shut up and enjoy the show. JARblue, Rusty, Hotrodz and 2 others like this.

02-05-2021, 04:02 PM	#641 (permalink)
gbrettin A True Z Fanatic Join Date: Oct 2010 Location: Portage, MI Posts: 2,279 Drives: Tricycle Rep Power: 589151	This just in from the powder coater and hot off Amazon truck. Looks like I have some work to do tomorrow... Push rod measurements, Wheel bearing and dampener removal/install. Of which only 1 will likely get started... lol I'm going with pushrods. So I can order them -Edit I'm for sure going with that accent color. It looks amazing in person and it will look awesome on the turbo housing. --Edit Edit The wheel bearings are being done because "since I'm in there..." That would be a budget killer if I followed a budget. I'd prefer not to. Rusty, Hotrodz, -ZS-Carpenter and 2 others like this. Last edited by gbrettin; 02-05-2021 at 04:06 PM.

02-07-2021, 04:07 PM	#642 (permalink)
gbrettin A True Z Fanatic Join Date: Oct 2010 Location: Portage, MI Posts: 2,279 Drives: Tricycle Rep Power: 589151	I've been a busy beaver the last few days. -Swirlpots with AN bungs have been welded on. -Ground down some aluminum inside the intake. -Assembled new ATI Damper -Messed up assembly so I had to press off and reassemble. The bolt holes didn't line up -Figured out that the old ARP damper bolt was too long. -Pulled old damper off. -Disassembled coil bracket mount for powder coating (going to be Yellow/green) -Installed front wheel hub assembly. I am going to do a rebuild and powder coat my calipers. Rusty, I know you have done it a few times. Where do you get the rebuild kits from? Last picture shows my brake duct not on the car after assembly. cool... First pictures show the powder coating on the car. Looks damn good in person! The camera can't keep up with the intensity of the Yellow/Green. The calipers will be coated the same yellow/green. I think the wheels for the car will be the Nismo Club Sport. If they still make them when I get close to being done. JARblue, Rusty, Hotrodz and 5 others like this.

02-07-2021, 04:49 PM	#643 (permalink)
Rusty Ronin Samurai - Assassin Join Date: Dec 2011 Location: Fayettenam,Pennsyltucky Age: 68 Posts: 35,165 Drives: 2011 Nismo GM 6M Rep Power: 2684437	Here's the KITS you need from Z1. They have the o-ring for between the halves. https://www.z1motorsports.com/brakes...it-p-6891.html gbrettin likes this. __________________ 浪人 - 殺し屋 "The Difficult Anytime, The Impossible By Appointment Only" http://www.the370z.com/members-370z-...o-journal.html

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Racing in Slow Motion IV	MightyBobo	The Lounge (Off Topic)	4	03-12-2013 09:12 PM
Racing In Slow Motion IV	Robert_K	The Lounge (Off Topic)	1	07-13-2012 12:01 PM
Slow shipping slow response slow everything	thispecialk	Nissan 370Z General Discussions	15	11-01-2010 09:23 PM
Racing in Slow Motion	MightyBobo	The Lounge (Off Topic)	2	12-17-2009 04:27 PM
IIHS Small Car Test: Three Gruesome Slow-Motion Crash Videos	AK370Z	Other Vehicles	13	04-15-2009 10:42 AM