Mr. G. Brettin's Slow Motion Leg Hump

gbrettin · 01-11-2020, 08:28 PM

Cleaned up some stock exhaust manifolds. Got a bit aggressive in a few spots. Looks like they are ready for v-bands AND filler. Oops. Did a test fit on the car and the manifolds fit perfectly.

Rusty · 01-11-2020, 08:52 PM

After grinding. Looks like you got some thin spots. You pokd some holes. Where you don't have holes. How thin are those areas?

gbrettin · 01-11-2020, 10:42 PM

It looked good except for where I blew through.

gbrettin · 01-16-2020, 10:29 AM

IT'S A MATCH! AMP EFI IGN-1A meet Motion Raceworks coil bracket. Gonna be some sweet sweet spark and bang action going on soon.

Coil packs mounted and intake bolted down. Motion Raceworks coil brackets look nice on the Holley valve covers. Some progress is better than no progress. I'm slow ��*♂️. I also try to think about future placement of turbo plumbing, wiring, hoses and etc... Guess that accounts for some of the slowness. I'd rather do it right.

Fun fact. It is possible to put the coil packs on the wrong way if you are a dummy. Note to self: Don't be stupid, stupid.

The mil-spec connector (shout out to Maven Performance) appears to be an awesome idea after all. The space where the battery was located is going to be the home for the mil-spec connector.

My shortlist needed now are EGT bungs (8 for sensors), Ignition Coil connectors and GM LS 58x Wiring Harness

That should conclude most all the wiring components I need.

madwi · 01-16-2020, 07:06 PM

It keeps getting better and better.

Motor looks great.

gbrettin · 01-18-2020, 06:51 PM

Reset the depth on all my used EGT sensors (used literally once). Previous owner had them set way too deep. Test fit the headers with bolts in so I can get my accessories figured out. Looks like I'll have a low mount alternator, that's all. I'm looking to get a junkyard electric power steering pump. Holley/Lokar drive by cable adapter attached to the twin intake.

EGT bungs (8 for sensors), Ignition Coil connectors and GM LS 58x Wiring Harness have been ordered today...

AND

Holley Premium Alternator
Holley Beauty Cover
Dirty Dingo Low Mount Bracket

I'll see how that goes prior to getting the ATI Super Damper.

ZontheRocks · 01-19-2020, 07:44 AM

This thing is going to be a stupid-fast monster and I cannot wait to hear the first cold start. Great build with awesome progress.

Rusty · 01-19-2020, 02:13 PM

Quote:

Originally Posted by ZontheRocks

This thing is going to be a stupid-fast monster and I cannot wait to hear the first cold start. Great build with awesome progress.

Zezus · 01-20-2020, 02:46 PM

In every picture it looks like the runners on that manifold are skinny A.F.

gbrettin · 01-20-2020, 03:08 PM

The manifold is huge. And the runners are no smaller than the cathedral port. Check this N/A test out by Richard Holdner:

https://m.facebook.com/story.php?sto...00000042513541

+37tq when compared to the truck manifold, which is the go to for boosted applications. That or the high ram.

Sent from my SM-G975U using Tapatalk

Zezus · 01-20-2020, 03:33 PM

Quote:

Originally Posted by gbrettin

The manifold is huge. And the runners are no smaller than the cathedral port. Check this N/A test out by Richard Holdner:

https://m.facebook.com/story.php?sto...00000042513541

+37tq when compared to the truck manifold, which is the go to for boosted applications. That or the high ram.

Sent from my SM-G975U using Tapatalk

Damn those are some solid gains.

It has to be the perspective. i know it doesn't make sense for a twin tb manifold to have smaller runners than say the high ram - but my brain is telling me it looks funny.

gbrettin · 01-20-2020, 05:02 PM

Quote:

Originally Posted by Zezus

Damn those are some solid gains.

It has to be the perspective. i know it doesn't make sense for a twin tb manifold to have smaller runners than say the high ram - but my brain is telling me it looks funny.

Pictures really don't do the intake justice. It's yuge. Hopefully I will have this turd beast at Zdayz so everyone can check it out.

gbrettin · 01-24-2020, 02:27 PM

I was told that my accessory drive must be finished prior to completing the turbo plumbing. :

So I dove in the last few days and got it all figured out.

I found a rad company that has top notch brackets. I dipped my toe in the water getting the alternator bracket. After getting the first piece in and reading over all the reviews I could find, they appear to be top notch. The bracketing allows me to low mount both the AC and alternator. Power steering is going to be mounted in the normal position but will have a small billet pulley.
Dirty Dingo Passenger low mount AC Kit
Dirty Dingo LS Low Mount Alternator Drivers Side
Dirty Dingo LS Camaro Billet Power Steering Bracket
Dirty Dingo Small Diameter 6 Rib Pulley for 98-02 Camaro Power Steering

I've never seen an unboxing of an ATI Damper. If you haven't, like me, now you have! 😁 As silly as this sounds... This is one of the icing on the cake components that I've always dreamed of having when I do a "build".

I should have all the accessories buttoned up soon. THEN the turbo plumbing can commence.

gbrettin · 01-25-2020, 09:00 PM

I just spent an embarrassing amount of time putting an ATI Damper together. I looked at the damn damper and thought to myself, "That's a ridiculous spacing." Turns out it was ridiculous... The stub shaft has to be flush with the front. 🙈 Live and learn.

Had to take off the timing cover and paint satin black. It didn't look right with the 417 water manifold and intake.

gbrettin · 01-26-2020, 06:42 AM

Someone asked me on FB why I did an ATI Damper. I pretty much directed them to this video.

01-11-2020, 08:28 PM	#211 (permalink)
gbrettin A True Z Fanatic Join Date: Oct 2010 Location: Portage, MI Posts: 2,282 Drives: Tricycle Rep Power: 589151	Cleaned up some stock exhaust manifolds. Got a bit aggressive in a few spots. Looks like they are ready for v-bands AND filler. Oops. Did a test fit on the car and the manifolds fit perfectly. ZontheRocks and Zezus like this.

01-11-2020, 08:52 PM	#212 (permalink)
Rusty Ronin Samurai - Assassin Join Date: Dec 2011 Location: Fayettenam,Pennsyltucky Age: 68 Posts: 35,185 Drives: 2011 Nismo GM 6M Rep Power: 2684437	After grinding. Looks like you got some thin spots. You pokd some holes. Where you don't have holes. How thin are those areas? gbrettin and BettyZ like this. __________________ 浪人 - 殺し屋 "The Difficult Anytime, The Impossible By Appointment Only" http://www.the370z.com/members-370z-...o-journal.html

01-16-2020, 10:29 AM	#214 (permalink)
gbrettin A True Z Fanatic Join Date: Oct 2010 Location: Portage, MI Posts: 2,282 Drives: Tricycle Rep Power: 589151	IT'S A MATCH! AMP EFI IGN-1A meet Motion Raceworks coil bracket. Gonna be some sweet sweet spark and bang action going on soon. Coil packs mounted and intake bolted down. Motion Raceworks coil brackets look nice on the Holley valve covers. Some progress is better than no progress. I'm slow ��♂️. I also try to think about future placement of turbo plumbing, wiring, hoses and etc... Guess that accounts for some of the slowness. I'd rather do it right. Fun fact. It is possible to put the coil packs on the wrong way if you are a dummy. Note to self: Don't be stupid, stupid. The mil-spec connector (shout out to Maven Performance) appears to be an awesome idea after all. The space where the battery was located is going to be the home for the mil-spec connector. My shortlist needed now are EGT bungs (8 for sensors), Ignition Coil connectors and GM LS 58x Wiring Harness That should conclude most all the wiring components I need. JARblue, Rusty, Hotrodz and 4 others like this. Last edited by gbrettin; 01-16-2020 at 10:56 AM.*

01-16-2020, 07:06 PM	#215 (permalink)
madwi A True Z Fanatic Join Date: Sep 2012 Location: West Michigan Posts: 31,410 Drives: Granma red Z Rep Power: 2684429	It keeps getting better and better. Motor looks great. gbrettin, Rusty, Hotrodz and 1 others like this.

01-18-2020, 06:51 PM	#216 (permalink)
gbrettin A True Z Fanatic Join Date: Oct 2010 Location: Portage, MI Posts: 2,282 Drives: Tricycle Rep Power: 589151	Reset the depth on all my used EGT sensors (used literally once). Previous owner had them set way too deep. Test fit the headers with bolts in so I can get my accessories figured out. Looks like I'll have a low mount alternator, that's all. I'm looking to get a junkyard electric power steering pump. Holley/Lokar drive by cable adapter attached to the twin intake. EGT bungs (8 for sensors), Ignition Coil connectors and GM LS 58x Wiring Harness have been ordered today... AND Holley Premium Alternator Holley Beauty Cover Dirty Dingo Low Mount Bracket I'll see how that goes prior to getting the ATI Super Damper. Rusty, Hotrodz, jchammond and 1 others like this. Last edited by gbrettin; 01-18-2020 at 07:23 PM.

01-11-2020, 10:42 PM	#213 (permalink)
gbrettin A True Z Fanatic Join Date: Oct 2010 Location: Portage, MI Posts: 2,282 Drives: Tricycle Rep Power: 589151	It looked good except for where I blew through.

01-19-2020, 07:44 AM	#217 (permalink)
ZontheRocks Track Member Join Date: Mar 2017 Location: Central Florida Posts: 958 Drives: 2016 Nissan PW 370Z Rep Power: 34535	This thing is going to be a stupid-fast monster and I cannot wait to hear the first cold start. Great build with awesome progress. gbrettin, Rusty and Hotrodz like this. __________________ '16 Pearl White Sport \| Stillen Gen. 3 \| Motordyne ART \| Motordyne Shockwave \| ZSpeed \| Powertrix \| EVO-R \| Aeroworkz \| Nismo \| Z1 \| EcuTek \| Tuned by Seb @ SpecialtyZ

01-20-2020, 02:46 PM	#219 (permalink)
Zezus Enthusiast Member Join Date: Dec 2018 Location: Cincinnati Posts: 354 Drives: 2016 370z sport 6spd Rep Power: 50338	In every picture it looks like the runners on that manifold are skinny A.F. gbrettin and Rusty like this.

01-20-2020, 03:08 PM	#220 (permalink)
gbrettin A True Z Fanatic Join Date: Oct 2010 Location: Portage, MI Posts: 2,282 Drives: Tricycle Rep Power: 589151	The manifold is huge. And the runners are no smaller than the cathedral port. Check this N/A test out by Richard Holdner: https://m.facebook.com/story.php?sto...00000042513541 +37tq when compared to the truck manifold, which is the go to for boosted applications. That or the high ram. Sent from my SM-G975U using Tapatalk Zezus likes this. Last edited by gbrettin; 01-20-2020 at 03:13 PM.

01-24-2020, 02:27 PM	#223 (permalink)
gbrettin A True Z Fanatic Join Date: Oct 2010 Location: Portage, MI Posts: 2,282 Drives: Tricycle Rep Power: 589151	I was told that my accessory drive must be finished prior to completing the turbo plumbing. : So I dove in the last few days and got it all figured out. I found a rad company that has top notch brackets. I dipped my toe in the water getting the alternator bracket. After getting the first piece in and reading over all the reviews I could find, they appear to be top notch. The bracketing allows me to low mount both the AC and alternator. Power steering is going to be mounted in the normal position but will have a small billet pulley. Dirty Dingo Passenger low mount AC Kit Dirty Dingo LS Low Mount Alternator Drivers Side Dirty Dingo LS Camaro Billet Power Steering Bracket Dirty Dingo Small Diameter 6 Rib Pulley for 98-02 Camaro Power Steering I've never seen an unboxing of an ATI Damper. If you haven't, like me, now you have! 😁 As silly as this sounds... This is one of the icing on the cake components that I've always dreamed of having when I do a "build". I should have all the accessories buttoned up soon. THEN the turbo plumbing can commence. Rusty, jchammond, old guy and 1 others like this.

01-25-2020, 09:00 PM	#224 (permalink)
gbrettin A True Z Fanatic Join Date: Oct 2010 Location: Portage, MI Posts: 2,282 Drives: Tricycle Rep Power: 589151	I just spent an embarrassing amount of time putting an ATI Damper together. I looked at the damn damper and thought to myself, "That's a ridiculous spacing." Turns out it was ridiculous... The stub shaft has to be flush with the front. 🙈 Live and learn. Had to take off the timing cover and paint satin black. It didn't look right with the 417 water manifold and intake. Rusty, madwi and jchammond like this.

01-26-2020, 06:42 AM	#225 (permalink)
gbrettin A True Z Fanatic Join Date: Oct 2010 Location: Portage, MI Posts: 2,282 Drives: Tricycle Rep Power: 589151	Someone asked me on FB why I did an ATI Damper. I pretty much directed them to this video. Rusty and jchammond like this.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Racing in Slow Motion IV	MightyBobo	The Lounge (Off Topic)	4	03-12-2013 09:12 PM
Racing In Slow Motion IV	Robert_K	The Lounge (Off Topic)	1	07-13-2012 12:01 PM
Slow shipping slow response slow everything	thispecialk	Nissan 370Z General Discussions	15	11-01-2010 09:23 PM
Racing in Slow Motion	MightyBobo	The Lounge (Off Topic)	2	12-17-2009 04:27 PM
IIHS Small Car Test: Three Gruesome Slow-Motion Crash Videos	AK370Z	Other Vehicles	13	04-15-2009 10:42 AM