Mr. G. Brettin's Slow Motion Leg Hump

gbrettin · 03-08-2019, 08:55 PM

Yes, I have elegant piano hands. Missed my calling as a stand in child hand model.

gbrettin · 03-11-2019, 04:01 PM

Get'm Garage came through on my oil squirters for my 5.3. Should be able to get this done this week and then assembly will commence, finally.

gbrettin · 03-15-2019, 09:30 PM

Valve covers came in today. (further cat inspections)

If anyone says "LS Swaps are cheap". Direct them to me. I'd like to personally spit in their eye.

gbrettin · 03-24-2019, 07:50 AM

Drilled and tapped the oil squirters:

gbrettin · 03-25-2019, 07:36 AM

Part 2 of drilling and tapping the oil squirters. I also knocked off the cast flashing so that debris would not come off during operation.

Zezus · 03-26-2019, 02:47 PM

Ooh this is cool.
What differential/rear end will you be using?

gbrettin · 03-26-2019, 04:25 PM

Quote:

Originally Posted by Zezus

Ooh this is cool.
What differential/rear end will you be using?

I'm going to weld the OE diff for this year and upgrade next year to a nice 1.5. I was thinking Wavetrac but I'm not sold on any one diff yet.

Zezus · 03-26-2019, 04:50 PM

The oem diff won't explode like a bad hand grenade with the power your shooting for?

Rusty · 03-26-2019, 05:06 PM

Quote:

Originally Posted by Zezus

The oem diff won't explode like a bad hand grenade with the power your shooting for?

No. People have been putting 800 hp to them for a while. The axles do need an up grade over 800 hp.

gbrettin · 03-26-2019, 05:52 PM

I'll let you know if 1300hp melts her down though. lol

madwi · 03-26-2019, 06:56 PM

Great job on the squirters.

Cant wait to see and hear this beast.

gbrettin · 03-26-2019, 10:20 PM

Main bearings in so that I can mic the crank and main bearing clearances. I'll get to the measurements tomorrow, didn't have a whole lot of time tonight.

Check out the before and after machine work on the crank! It's been polished and perfectly balanced so that I can spin 9k+RPM.

Rusty · 03-26-2019, 10:33 PM

Internal, or external balance? (with or without dampener and flywheel) Did they have to add weight anywhere. If they did. Did they use Mallory metal?

gbrettin · 03-26-2019, 10:42 PM

Quote:

Originally Posted by Rusty

Internal, or external balance? (with or without dampener and flywheel) Did they have to add weight anywhere. If they did. Did they use Mallory metal?

It was balanced with the flywheel and they had to add some weight (which adds $$$ fast). Not sure what kind of metal they used. I don't have my ATI Dampener yet and was told it should be ok.

Rusty · 03-26-2019, 11:19 PM

Quote:

Originally Posted by gbrettin

It was balanced with the flywheel and they had to add some weight (which adds $$$ fast). Not sure what kind of metal they used. I don't have my ATI Dampener yet and was told it should be ok.

When adding heavy metal. The cost can sky rocket. Or kill a crank.

03-08-2019, 08:55 PM	#46 (permalink)
gbrettin A True Z Fanatic Join Date: Oct 2010 Location: Portage, MI Posts: 2,280 Drives: Tricycle Rep Power: 589151	Yes, I have elegant piano hands. Missed my calling as a stand in child hand model. Rusty, Hotrodz, madwi and 1 others like this.

03-11-2019, 04:01 PM	#47 (permalink)
gbrettin A True Z Fanatic Join Date: Oct 2010 Location: Portage, MI Posts: 2,280 Drives: Tricycle Rep Power: 589151	Get'm Garage came through on my oil squirters for my 5.3. Should be able to get this done this week and then assembly will commence, finally. Rusty, Hotrodz, madwi and 3 others like this.

03-15-2019, 09:30 PM	#48 (permalink)
gbrettin A True Z Fanatic Join Date: Oct 2010 Location: Portage, MI Posts: 2,280 Drives: Tricycle Rep Power: 589151	Valve covers came in today. (further cat inspections) If anyone says "LS Swaps are cheap". Direct them to me. I'd like to personally spit in their eye. Rusty, Hotrodz, madwi and 2 others like this. Last edited by gbrettin; 03-15-2019 at 09:33 PM.

03-24-2019, 07:50 AM	#49 (permalink)
gbrettin A True Z Fanatic Join Date: Oct 2010 Location: Portage, MI Posts: 2,280 Drives: Tricycle Rep Power: 589151	Drilled and tapped the oil squirters: Rusty, Hotrodz, old guy and 1 others like this. Last edited by gbrettin; 03-24-2019 at 07:54 AM.

03-25-2019, 07:36 AM	#50 (permalink)
gbrettin A True Z Fanatic Join Date: Oct 2010 Location: Portage, MI Posts: 2,280 Drives: Tricycle Rep Power: 589151	Part 2 of drilling and tapping the oil squirters. I also knocked off the cast flashing so that debris would not come off during operation. JARblue, Rusty, Hotrodz and 2 others like this. Last edited by gbrettin; 03-25-2019 at 07:41 AM.

03-26-2019, 02:47 PM	#51 (permalink)
Zezus Enthusiast Member Join Date: Dec 2018 Location: Cincinnati Posts: 354 Drives: 2016 370z sport 6spd Rep Power: 50338	Ooh this is cool. What differential/rear end will you be using? gbrettin likes this.

03-26-2019, 04:50 PM	#53 (permalink)
Zezus Enthusiast Member Join Date: Dec 2018 Location: Cincinnati Posts: 354 Drives: 2016 370z sport 6spd Rep Power: 50338	The oem diff won't explode like a bad hand grenade with the power your shooting for?

03-26-2019, 05:52 PM	#55 (permalink)
gbrettin A True Z Fanatic Join Date: Oct 2010 Location: Portage, MI Posts: 2,280 Drives: Tricycle Rep Power: 589151	I'll let you know if 1300hp melts her down though. lol Rusty, Hotrodz, madwi and 2 others like this.

03-26-2019, 06:56 PM	#56 (permalink)
madwi A True Z Fanatic Join Date: Sep 2012 Location: West Michigan Posts: 31,410 Drives: Granma red Z Rep Power: 2684429	Great job on the squirters. Cant wait to see and hear this beast. gbrettin likes this.

03-26-2019, 10:20 PM	#57 (permalink)
gbrettin A True Z Fanatic Join Date: Oct 2010 Location: Portage, MI Posts: 2,280 Drives: Tricycle Rep Power: 589151	Main bearings in so that I can mic the crank and main bearing clearances. I'll get to the measurements tomorrow, didn't have a whole lot of time tonight. Check out the before and after machine work on the crank! It's been polished and perfectly balanced so that I can spin 9k+RPM. madwi likes this. Last edited by gbrettin; 03-26-2019 at 10:22 PM.

03-26-2019, 10:33 PM	#58 (permalink)
Rusty Ronin Samurai - Assassin Join Date: Dec 2011 Location: Fayettenam,Pennsyltucky Age: 68 Posts: 35,180 Drives: 2011 Nismo GM 6M Rep Power: 2684437	Internal, or external balance? (with or without dampener and flywheel) Did they have to add weight anywhere. If they did. Did they use Mallory metal? gbrettin likes this. __________________ 浪人 - 殺し屋 "The Difficult Anytime, The Impossible By Appointment Only" http://www.the370z.com/members-370z-...o-journal.html

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Racing in Slow Motion IV	MightyBobo	The Lounge (Off Topic)	4	03-12-2013 09:12 PM
Racing In Slow Motion IV	Robert_K	The Lounge (Off Topic)	1	07-13-2012 12:01 PM
Slow shipping slow response slow everything	thispecialk	Nissan 370Z General Discussions	15	11-01-2010 09:23 PM
Racing in Slow Motion	MightyBobo	The Lounge (Off Topic)	2	12-17-2009 04:27 PM
IIHS Small Car Test: Three Gruesome Slow-Motion Crash Videos	AK370Z	Other Vehicles	13	04-15-2009 10:42 AM