Mr. G. Brettin's Slow Motion Leg Hump

gbrettin · 01-14-2021, 12:24 PM

I've decided to post the ENTIRE photo dump album, uncompressed, here and on the first page. It might help someone that needs a high def photo for their build or something.

COMPLETE PHOTO LIBRARY OF Z BUILD... PHOTO HEAVY

gbrettin · 01-18-2021, 08:35 AM

Front of the car broke down and parts have been brought to my house. A2W intercoolers, Intake and oil pan are out for welding. Crash bar has been dropped off for powder coating. I saw that the powder coater can do high lighter yellow so I'm going to have him accent a couple parts with that color. For sure the turbos. I was thinking about doing the shock tower trim and coil bracket.

The engine and transmission have been dropped out for final inspection and build. BTR rockers have been released so those have been ordered:
https://www.facebook.com/brian.toole...52909588054463

An ATI 10% under drive was also ordered so that my belts can route past the water pump. I hope that's enough... Push rod length will be measured this coming weekend if all goes well.

AutoDynamix was cleaned and organized because it was getting out of hand. It's hard to do good work in a dirty shop.:
https://www.instagram.com/p/CKKTIZvH..._web_copy_link

gbrettin · 01-18-2021, 10:28 PM

One year later... I find myself painting the engine bay. again. This time I dropped the k member. The engine bay was degreased and then scuffed. I found some issues with the paint that required attention, nothing major because I got after it now.

Today was a long *** day. Paint prep SUCKS. 9am - 9pm. Don't even feel like writing much... lol

Rusty · 01-18-2021, 10:36 PM

Looking at that front with nothing there. You wonder how is that a stiff chassis? But it is.

BettyZ · 01-18-2021, 11:32 PM

Quote:

Originally Posted by Rusty

Looking at that front with nothing there. You wonder how is that a stiff chassis? But it is.

Gotta get those SoulFunction braces.

Rusty · 01-19-2021, 12:09 AM

Quote:

Originally Posted by BettyZ

Gotta get those SoulFunction braces.

The way everything is bolted on stiffens it. The engine sub-frame, crash bar, the brace over the engine, radiator support, etc.

BettyZ · 01-19-2021, 04:45 PM

Quote:

Originally Posted by Rusty

The way everything is bolted on stiffens it. The engine sub-frame, crash bar, the brace over the engine, radiator support, etc.

We all know you like it stiff

Rusty · 01-19-2021, 05:17 PM

Quote:

Originally Posted by BettyZ

We all know you like it stiff

I ain't dead yet.

gbrettin · 01-20-2021, 09:24 AM

Engine bay has officially been painted. It's decent. There some lint in the paint by the firewall because I didn't run a tack cloth. I used a cotton cloth that left a few fibers. The bay is darker than the OE paint because the primer is grey instead of white. apparently that matters. Outside of that, I'm happy with the results and ok with it. This whole path literally branched from battery acid lifting paint, which caused some rust. Then I got the bright idea to stitch weld from Bryan Settle. Not doing that again. It did, however, make me feel comfortable modifying the engine bay as needed for modifications.

Hotrodz · 01-20-2021, 09:29 AM

So fresh and clean clean!!!

NorthStyle · 01-20-2021, 10:46 AM

You plan on shaving the wires while you have everything out?

Rusty · 01-20-2021, 02:35 PM

Now to scratch it up when installing everything.

gbrettin · 01-20-2021, 03:45 PM

Quote:

Originally Posted by NorthStyle

You plan on shaving the wires while you have everything out?

If you mean thinning the wiring harness, yes. I'm deferring to my buddy for that because that's what they specialize in.

gbrettin · 01-20-2021, 03:52 PM

Quote:

Originally Posted by Rusty

Now to scratch it up when installing everything.

I'll try not to... but it's an engine bay at the end of the day for a driver. My car will not be a show car or trailer queen. Although.... There's only one show I'm entering in, Zdayz 2021 wild category.

gbrettin · 01-20-2021, 08:45 PM

01-14-2021, 12:24 PM	#601 (permalink)
gbrettin A True Z Fanatic Join Date: Oct 2010 Location: Portage, MI Posts: 2,284 Drives: Tricycle Rep Power: 589151	I've decided to post the ENTIRE photo dump album, uncompressed, here and on the first page. It might help someone that needs a high def photo for their build or something. COMPLETE PHOTO LIBRARY OF Z BUILD... PHOTO HEAVY Rusty, Hotrodz, madwi and 3 others like this.

01-18-2021, 08:35 AM	#602 (permalink)
gbrettin A True Z Fanatic Join Date: Oct 2010 Location: Portage, MI Posts: 2,284 Drives: Tricycle Rep Power: 589151	Front of the car broke down and parts have been brought to my house. A2W intercoolers, Intake and oil pan are out for welding. Crash bar has been dropped off for powder coating. I saw that the powder coater can do high lighter yellow so I'm going to have him accent a couple parts with that color. For sure the turbos. I was thinking about doing the shock tower trim and coil bracket. The engine and transmission have been dropped out for final inspection and build. BTR rockers have been released so those have been ordered: https://www.facebook.com/brian.toole...52909588054463 An ATI 10% under drive was also ordered so that my belts can route past the water pump. I hope that's enough... Push rod length will be measured this coming weekend if all goes well. AutoDynamix was cleaned and organized because it was getting out of hand. It's hard to do good work in a dirty shop.: https://www.instagram.com/p/CKKTIZvH..._web_copy_link JARblue, Rusty, Hotrodz and 5 others like this.

01-18-2021, 10:28 PM	#603 (permalink)
gbrettin A True Z Fanatic Join Date: Oct 2010 Location: Portage, MI Posts: 2,284 Drives: Tricycle Rep Power: 589151	One year later... I find myself painting the engine bay. again. This time I dropped the k member. The engine bay was degreased and then scuffed. I found some issues with the paint that required attention, nothing major because I got after it now. Today was a long *** day. Paint prep SUCKS. 9am - 9pm. Don't even feel like writing much... lol Rusty, Hotrodz, madwi and 5 others like this.

01-18-2021, 10:36 PM	#604 (permalink)
Rusty Ronin Samurai - Assassin Join Date: Dec 2011 Location: Fayettenam,Pennsyltucky Age: 68 Posts: 35,217 Drives: 2011 Nismo GM 6M Rep Power: 2684438	Looking at that front with nothing there. You wonder how is that a stiff chassis? But it is. gbrettin, Hotrodz, jchammond and 2 others like this. __________________ 浪人 - 殺し屋 "The Difficult Anytime, The Impossible By Appointment Only" http://www.the370z.com/members-370z-...o-journal.html

01-20-2021, 09:24 AM	#609 (permalink)
gbrettin A True Z Fanatic Join Date: Oct 2010 Location: Portage, MI Posts: 2,284 Drives: Tricycle Rep Power: 589151	Engine bay has officially been painted. It's decent. There some lint in the paint by the firewall because I didn't run a tack cloth. I used a cotton cloth that left a few fibers. The bay is darker than the OE paint because the primer is grey instead of white. apparently that matters. Outside of that, I'm happy with the results and ok with it. This whole path literally branched from battery acid lifting paint, which caused some rust. Then I got the bright idea to stitch weld from Bryan Settle. Not doing that again. It did, however, make me feel comfortable modifying the engine bay as needed for modifications. JARblue, Rusty, Hotrodz and 6 others like this.

01-20-2021, 09:29 AM	#610 (permalink)
Hotrodz A True Z Fanatic Join Date: Aug 2012 Location: NW, AZ Posts: 9,330 Drives: 10 Nissan 370z Nismo Rep Power: 2684385	So fresh and clean clean!!! gbrettin, JARblue, Rusty and 5 others like this. __________________ *Fast Intentions TT Installed and Tuned by Seb at SpecialtyZ 610whp 560tq:\|Fast Intentions 3" TT-TDX*\|SpecialtyZ/Fast Intentions 72 Row Oil Cooler\|SZ 6 Puck Clutch & Flywheel\|3GsCustoms\|Z1\|Wavetrac\|Hotchkis\|Whiteline \|Blitz\|Fortune Auto 500\|Fujimura\|SPL\|H&R\|TK\|TWM\|RPM Rollbar\|Sparco\|Next Level Performance\|TrackSpec\|AeroFlow Dynamics\|Pioneer\|

01-20-2021, 10:46 AM	#611 (permalink)
NorthStyle A True Z Fanatic Join Date: Aug 2015 Location: Deutschland + SC/FL USA Posts: 1,258 Drives: 2011 370Z Nismo Rep Power: 24277	You plan on shaving the wires while you have everything out? gbrettin likes this.

01-20-2021, 02:35 PM	#612 (permalink)
Rusty Ronin Samurai - Assassin Join Date: Dec 2011 Location: Fayettenam,Pennsyltucky Age: 68 Posts: 35,217 Drives: 2011 Nismo GM 6M Rep Power: 2684438	Now to scratch it up when installing everything. gbrettin, JARblue, Spooler and 3 others like this. __________________ 浪人 - 殺し屋 "The Difficult Anytime, The Impossible By Appointment Only" http://www.the370z.com/members-370z-...o-journal.html

01-20-2021, 08:45 PM	#615 (permalink)
gbrettin A True Z Fanatic Join Date: Oct 2010 Location: Portage, MI Posts: 2,284 Drives: Tricycle Rep Power: 589151	Hotrodz, madwi, Ghostvette and 3 others like this.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Racing in Slow Motion IV	MightyBobo	The Lounge (Off Topic)	4	03-12-2013 09:12 PM
Racing In Slow Motion IV	Robert_K	The Lounge (Off Topic)	1	07-13-2012 12:01 PM
Slow shipping slow response slow everything	thispecialk	Nissan 370Z General Discussions	15	11-01-2010 09:23 PM
Racing in Slow Motion	MightyBobo	The Lounge (Off Topic)	2	12-17-2009 04:27 PM
IIHS Small Car Test: Three Gruesome Slow-Motion Crash Videos	AK370Z	Other Vehicles	13	04-15-2009 10:42 AM