JLarson's build thread

madwi · 02-27-2020, 08:04 AM

Quote:

Originally Posted by JLarson

That being said, it was pretty easy to bolt on, we just had to move some washers I was using as spacers for the intercooler.

My pressure tester arrived last night (thanks to Solidus for the rec). I probably won't get a chance to do any additional work until Friday evening, but glad to have it. Hopefully I can figure out quickly if this is a vacuum leak.

The fuel tap should be arriving Friday also.

Spooler · 03-01-2020, 08:41 PM

Got it figured out yet?

JLarson · 03-02-2020, 07:40 AM

Quote:

Originally Posted by Spooler

Got it figured out yet?

No. I actually didn't touch the project at all until Saturday, needing time away from it.

Saturday I went back through, examining all connections. I moved and adjusted all clamps, adjusted piping near the CMAK for slightly better clearance, took my time with it. The goal was to get set for the boost pressure tester; also one of my buddies has access to a smoke machine from his shop, and his plan was to bring that by Sunday. I found nothing obvious Saturday, except that the orientation of the turbo (inlet side) could be improved. Everything appears to have been well seated.

Sunday I went a bit further including adjusting the turbo inlet side and discovered one unusual item. COMP has apparently stopped plugging one port on the side of the turbo. It requires a 1/8 NPT plug, available for about $3 from Lowes, pic attached.

Kauffman (mechanic buddy) unfortunately forgot the smoke machine (the perils of having wife and children) but did stop by. Attempted to start the car. Same basic issue.

Troubleshooting we performed:
-Fuel rail is absolutely pressurized. Madwi and I had previously checked this, but last night we did retest, twice. It gets enough fuel to spray when disconnected.
-To that point, you can clearly hear the fuel pump turn on and run.
-During the brief moments it runs, car is running pig rich. You can smell it, and we pulled a spark plug to confirm. Definitely being fouled with fuel.
-It's not misfiring.
-All cylinders are firing.
-It's not an obvious vacuum leak - car does not rev really high and then die as it would if I were missing a gasket. That being said, I'd previously verified all gaskets were present by the Throttle Bodies and under the plenum, and in good condition. If it was a vacuum leak and it were causing the issue, it should be post MAF.

My wife has a 2013 G37x and is currently away on business, so just to rule them out, I'm going to swap in her MAF sensors, throttle bodies, and fuel rail, in that order, testing each component one at a time to rule it out as a possible cause.

A part of me is wondering if my oversized throttle bodies are a component of this, since the last time I installed them (2018 or so) I had to run through the idle relearn just to get the car to stabilize. I'm wondering if they aren't opening correctly and the car is shutting off before I can do anything about it?

Rusty · 03-02-2020, 07:47 AM

Other people have had issues with the over sized throttle bodies. Might be worth it to swap them out for the stock throttle bodies.

JLarson · 03-02-2020, 07:49 AM

Quote:

Originally Posted by Rusty

Other people have had issues with the over sized throttle bodies. Might be worth it to swap them out for the stock throttle bodies.

Yeah that was my late night epiphany. Since I have access, I might as well.

Hotrodz · 03-02-2020, 10:38 AM

Quote:

Originally Posted by Rusty

Other people have had issues with the over sized throttle bodies. Might be worth it to swap them out for the stock throttle bodies.

Agreed!

Sent from my SM-G965U using Tapatalk

JLarson · 03-03-2020, 06:44 PM

It's not the throttle bodies.

Rusty · 03-03-2020, 07:04 PM

Quote:

Originally Posted by JLarson

It's not the throttle bodies.

Still doing the same thing?

JLarson · 03-03-2020, 07:09 PM

Quote:

Originally Posted by Rusty

Still doing the same thing?

Yeah, no change. Reached out to RT tuning to see if they can check the fuel scaling on the base map they sent me just to rule that out. If that doesn't yield anything, next on the list are the injectors.

JLarson · 03-04-2020, 08:38 AM

RT sent me a new base map, fingers crossed! I'll load it tonight when I'm home from work.

JLarson · 03-04-2020, 04:53 PM

Car is alive!!! It was the tune!!

Ghostvette · 03-04-2020, 04:56 PM

Quote:

Originally Posted by JLarson

Car is alive!!! It was the tune!!

Congrats!!!

Rusty · 03-04-2020, 04:58 PM

Quote:

Originally Posted by JLarson

Car is alive!!! It was the tune!!

Now..........did you fix the lift in the mean time? Or is it still stuck in the air?

madwi · 03-04-2020, 05:46 PM

Quote:

Originally Posted by JLarson

Car is alive!!! It was the tune!!

JLarson · 03-04-2020, 05:59 PM

Quote:

Originally Posted by Rusty

Now..........did you fix the lift in the mean time? Or is it still stuck in the air?

Ha still stuck for the moment, haven't tried to fix it. Knew I'd need to be under it 😉 that'll come now that it's running.

03-01-2020, 08:41 PM	#287 (permalink)
Spooler A True Z Fanatic Join Date: Jun 2014 Location: Ga Posts: 13,781 Drives: 2013 Nismo 370z Rep Power: 2684392	Got it figured out yet? Hotrodz and redondoaveb like this.

03-02-2020, 07:47 AM	#289 (permalink)
Rusty Ronin Samurai - Assassin Join Date: Dec 2011 Location: Fayettenam,Pennsyltucky Age: 68 Posts: 35,164 Drives: 2011 Nismo GM 6M Rep Power: 2684437	Other people have had issues with the over sized throttle bodies. Might be worth it to swap them out for the stock throttle bodies. JARblue, Hotrodz and redondoaveb like this. __________________ 浪人 - 殺し屋 "The Difficult Anytime, The Impossible By Appointment Only" http://www.the370z.com/members-370z-...o-journal.html

03-03-2020, 06:44 PM	#292 (permalink)
JLarson A True Z Fanatic Join Date: Jun 2017 Location: Media, PA Posts: 4,074 Drives: 14 Nissan 370z MR M6 Rep Power: 2684370	It's not the throttle bodies. redondoaveb likes this. __________________ 2014 370z Touring Sport Magma Red MT // BP Single Turbo 6467 // 63mm TB's // Z1 Ported Upper Mani // RJM Pedal // Zspeed Stage 3 Clutch // 526 WHP, 451 WTQ 2006 350z (Sold) // 1990 300zx (Sold) // 1985 300zx 2+2 (Sold)

03-04-2020, 08:38 AM	#295 (permalink)
JLarson A True Z Fanatic Join Date: Jun 2017 Location: Media, PA Posts: 4,074 Drives: 14 Nissan 370z MR M6 Rep Power: 2684370	RT sent me a new base map, fingers crossed! I'll load it tonight when I'm home from work. Rusty, Hotrodz, Memphis370Z and 5 others like this. __________________ 2014 370z Touring Sport Magma Red MT // BP Single Turbo 6467 // 63mm TB's // Z1 Ported Upper Mani // RJM Pedal // Zspeed Stage 3 Clutch // 526 WHP, 451 WTQ 2006 350z (Sold) // 1990 300zx (Sold) // 1985 300zx 2+2 (Sold)

03-04-2020, 04:53 PM	#296 (permalink)
JLarson A True Z Fanatic Join Date: Jun 2017 Location: Media, PA Posts: 4,074 Drives: 14 Nissan 370z MR M6 Rep Power: 2684370	Car is alive!!! It was the tune!! gbrettin, JARblue, cv129 and 15 others like this. __________________ 2014 370z Touring Sport Magma Red MT // BP Single Turbo 6467 // 63mm TB's // Z1 Ported Upper Mani // RJM Pedal // Zspeed Stage 3 Clutch // 526 WHP, 451 WTQ 2006 350z (Sold) // 1990 300zx (Sold) // 1985 300zx 2+2 (Sold)

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
JLarson's Great Big Dyno Results Thread!	JLarson	Engine & Drivetrain	17	01-05-2018 04:22 PM
My Build Thread	370z1129	Nissan 370Z General Discussions	6	11-06-2014 05:54 PM
ENT-Z Build Thread	ENT-Z	Member's 370Z Gallery	68	09-06-2014 11:00 PM
THE "Lets argue about Bullitt's build with out ruining Bullitt's build thread" THREAD	Reaper42	Forced Induction	14	01-22-2011 06:24 PM