Zerafians slow build threadRound 3

STP370z · 04-17-2018, 05:11 PM

I like that black housing, need to do mine like that

Sent from my LG-H918 using Tapatalk

Zerafian · 04-17-2018, 05:51 PM

Quote:

Originally Posted by STP370z

I like that black housing, need to do mine like that

Sent from my LG-H918 using Tapatalk

the matte black goes really well with a dark car. I personally think gloss black blends too much with the car. Went really modest with only the CF reflector and darker silver shrouds. I've always thought the stock shroud, light grey, was to well, light in color.

Zerafian · 04-20-2018, 09:16 PM

all suspension parts are on: stance coils, SPL camber and toe arms, Z1 front control arms...fingers crossed the wheels are only a couple weeks away.

Testing ride height, it looks like Ill need to 1/4-1/2 further in the rear and 1/2 in the front.

Zerafian · 04-21-2018, 07:05 PM

Got my suspension installed yesterday. Did some ride height testing and got about a 1.5” drop on all sides. Looks like I’ll need about another .5” and I’ll be good to go.

Obviously hard to tell since the stock wheels are sunk in.

ZontheRocks · 04-22-2018, 07:04 AM

Mods are looking like they are going well and the car looks great!

Any CELs after the ART pipe install? I picked some up myself but have been holding off until a tune due to potential CEL. Thanks!

Zerafian · 04-22-2018, 10:34 AM

Quote:

Originally Posted by ZontheRocks

Mods are looking like they are going well and the car looks great!

Any CELs after the ART pipe install? I picked some up myself but have been holding off until a tune due to potential CEL. Thanks!

nothing yet...maybe due to how far the O2 sensor attaches from the actual pipe.

ZontheRocks · 04-22-2018, 04:31 PM

Quote:

Originally Posted by Zerafian

nothing yet...maybe due to how far the O2 sensor attaches from the actual pipe.

Thanks for the info! I may need to jump start the install and feel the powah!

STP370z · 04-22-2018, 04:36 PM

Quote:

Originally Posted by Zerafian

Got my suspension installed yesterday. Did some ride height testing and got about a 1.5” drop on all sides. Looks like I’ll need about another .5” and I’ll be good to go.

Obviously hard to tell since the stock wheels are sunk in.

Run a 20mm spacer in the back and 15mm in the front if the tires aren't tucked

Sent from my LG-H918 using Tapatalk

Zerafian · 04-22-2018, 07:48 PM

Quote:

Originally Posted by STP370z

Run a 20mm spacer in the back and 15mm in the front if the tires aren't tucked

Sent from my LG-H918 using Tapatalk

Im just waiting for my wheels to come in. If someone let me borrow spacers until my wheels came in, Id definitely put them on.

Zerafian · 05-09-2018, 01:29 PM

Got tint put on today. 40% on the front 20% on the sides, and 5% on the small windows and rear.

Zerafian · 05-09-2018, 02:31 PM

still just waiting on my wheels...about 13-14 weeks in at this point. Same ol' wait like last time.

STP370z · 05-09-2018, 02:32 PM

Better be some good wheels

Quote:

Originally Posted by Zerafian

still just waiting on my wheels...about 13-14 weeks in at this point. Same ol' wait like last time.

Sent from my LG-H918 using Tapatalk

Zerafian · 05-09-2018, 03:01 PM

Quote:

Originally Posted by STP370z

Better be some good wheels

Sent from my LG-H918 using Tapatalk

Guess we'll see

Ill say this much. They are very aggressive and similar to the Work CR2P. Talking -3 camber to get them fitting tight on the car.

Zerafian · 05-23-2018, 02:25 PM

Paint matched door handles incoming! Just needs a little buffing and polishing, to get out the imperfections.

madwi · 05-23-2018, 02:26 PM

Quote:

Originally Posted by Zerafian

Paint matched door handles incoming! Just needs a little buffing and polishing, to get out the imperfections.

( Click to show/hide )

One of my favorite mods.

Going to look great mounted.

04-17-2018, 05:11 PM	#31 (permalink)
STP370z Base Member Join Date: Jun 2017 Location: FL Posts: 146 Drives: '14 370z Touring Rep Power: 8	I like that black housing, need to do mine like that Sent from my LG-H918 using Tapatalk Zerafian likes this.

04-20-2018, 09:16 PM	#33 (permalink)
Zerafian A True Z Fanatic Join Date: Jan 2009 Location: Chattanooga, TN Posts: 1,340 Drives: 13' MB 370z Rep Power: 30949	all suspension parts are on: stance coils, SPL camber and toe arms, Z1 front control arms...fingers crossed the wheels are only a couple weeks away. Testing ride height, it looks like Ill need to 1/4-1/2 further in the rear and 1/2 in the front. ZontheRocks and drahmin like this. __________________ LC500 exhaust set uphttps://www.youtube.com/watch?v=bI7DiA43ZYw&t

04-21-2018, 07:05 PM	#34 (permalink)
Zerafian A True Z Fanatic Join Date: Jan 2009 Location: Chattanooga, TN Posts: 1,340 Drives: 13' MB 370z Rep Power: 30949	Got my suspension installed yesterday. Did some ride height testing and got about a 1.5” drop on all sides. Looks like I’ll need about another .5” and I’ll be good to go. Obviously hard to tell since the stock wheels are sunk in. madwi, ZontheRocks and drahmin like this. __________________ LC500 exhaust set uphttps://www.youtube.com/watch?v=bI7DiA43ZYw&t

05-09-2018, 01:29 PM	#40 (permalink)
Zerafian A True Z Fanatic Join Date: Jan 2009 Location: Chattanooga, TN Posts: 1,340 Drives: 13' MB 370z Rep Power: 30949	Got tint put on today. 40% on the front 20% on the sides, and 5% on the small windows and rear. ZontheRocks, STP370z and Calg37USMC like this. __________________ LC500 exhaust set uphttps://www.youtube.com/watch?v=bI7DiA43ZYw&t Last edited by Zerafian; 05-09-2018 at 02:09 PM.

05-09-2018, 02:31 PM	#41 (permalink)
Zerafian A True Z Fanatic Join Date: Jan 2009 Location: Chattanooga, TN Posts: 1,340 Drives: 13' MB 370z Rep Power: 30949	still just waiting on my wheels...about 13-14 weeks in at this point. Same ol' wait like last time. __________________ LC500 exhaust set uphttps://www.youtube.com/watch?v=bI7DiA43ZYw&t

04-22-2018, 07:04 AM	#35 (permalink)
ZontheRocks Track Member Join Date: Mar 2017 Location: Central Florida Posts: 958 Drives: 2016 Nissan PW 370Z Rep Power: 34535	Mods are looking like they are going well and the car looks great! Any CELs after the ART pipe install? I picked some up myself but have been holding off until a tune due to potential CEL. Thanks!

05-23-2018, 02:25 PM	#44 (permalink)
Zerafian A True Z Fanatic Join Date: Jan 2009 Location: Chattanooga, TN Posts: 1,340 Drives: 13' MB 370z Rep Power: 30949	Paint matched door handles incoming! Just needs a little buffing and polishing, to get out the imperfections. madwi, ZontheRocks and STP370z like this. __________________ LC500 exhaust set uphttps://www.youtube.com/watch?v=bI7DiA43ZYw&t

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Zerafians G35 build..clone of my 350z.	Zerafian	Other Vehicles	31	02-13-2017 05:32 PM
cv129's slow build	cv129	Member's 370Z Gallery	40	01-26-2017 05:58 PM
THE "Lets argue about Bullitt's build with out ruining Bullitt's build thread" THREAD	Reaper42	Forced Induction	14	01-22-2011 06:24 PM
Slow shipping slow response slow everything	thispecialk	Nissan 370Z General Discussions	15	11-01-2010 09:23 PM
Permatex High Temp Thread Sealant, Slow to Cure?	spearfish25	Nissan 370Z General Discussions	0	06-29-2010 10:19 PM

Zerafians slow build thread~~Round 3~~

Zerafians slow build threadRound 3