|
Finalized the fan shroud mounting for the most part, 4 more rivnuts and it's good to go. The new assembly is 6.5" thick where as the OEM radiator/fans were 10"
|
|||||||
|
|
LinkBack | Thread Tools | Display Modes |
06-23-2022, 07:53 AM
|
#15 (permalink) |
|
Track Member
 
Join Date: May 2017
Location: Cayman Islands
Posts: 685
Drives: 2010 370Z
Rep Power: 57454   |
Finalized the fan shroud mounting for the most part, 4 more rivnuts and it's good to go. The new assembly is 6.5" thick where as the OEM radiator/fans were 10" deep, if I get them mounted in the same spot I should have ample clearance.
 Ordered up some 1/2" ID energy suspension bushings to use as radiator mount bushings. I need to weld some 1/2" rod to the bottom of the radiator and drill the required holes in the subframe (which I apparently have to straighten)  Expansion tank location, I will not be using the mock up tank in the picture as the sheet I used is too thin and I can only booger weld with 9 fingers it seems. I'll cut the rad cap fitting off the radiator, plug the hole and weld a 10AN bung on the back side right at the top as a fill point to be fed by the expansion tank. The steam vents are going to be plumbed straight to the tank with some 4AN hose.
__________________
2010 Sport - LS3 swap loading 2012 Frontier - BTWTuning VK56DE swap Last edited by sirnixalot; 06-23-2022 at 08:01 AM. |
|
|
| Bookmarks |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| 370Z For Sale 2010 Black 7AT with Sport | ViCiouS | 370Z For Sale | 6 | 07-25-2016 06:55 PM |
| 2010 370 Z Sport Package | sweetazzz16 | Cars for sale (Private Classifieds) | 1 | 05-02-2016 05:06 PM |
| 370Z For Sale 2010 Roadster Red W/ Sport Pkg. and Nav | hansoac | 370Z For Sale | 4 | 10-17-2011 03:01 PM |
| FS - my 2010 base + sport PW 6sp | butdamnbrian | Northern California Region | 6 | 10-13-2011 02:37 PM |
| SA TX 2010 BS 6mt w/sport package | lllll210lllll | 370Z For Sale | 1 | 11-02-2010 11:38 PM |
823Likes
Threaded Mode
