Madwi's picture dump and crap

madwi · 04-15-2021, 08:50 PM

Put insurance on the car a couple weeks ago and went for a nice cruise around the city. Turbo **** the bed about 300 yds from the house. Ripped the car apart with ZS-carpenter and found the blades had hit the housing. Turbo is sent off to Compturbo for evaluation and fixing. Went to put the FI exhaust on the car and got the wrong part sent from Boosted Performance. Z is on lift back into hibernation. Removed insurance from the Z.

Spooler · 04-15-2021, 09:08 PM

Quote:

Originally Posted by madwi

Put insurance on the car a couple weeks ago and went for a nice cruise around the city. Turbo **** the bed about 300 yds from the house. Ripped the car apart with ZS-carpenter and found the blades had hit the housing. Turbo is sent off to Compturbo for evaluation and fixing. Went to put the FI exhaust on the car and got the wrong part sent from Boosted Performance. Z is on lift back into hibernation. Removed insurance from the Z.

Life of a boost junkie sucks sometimes.

madwi · 04-15-2021, 09:13 PM

Quote:

Originally Posted by Spooler

Life of a boost junkie sucks sometimes.

Yeah, **** happens.

Mod, drive, break, fix, drive, mod, drive set on repeat.

axmea? · 04-16-2021, 02:12 AM

Great work done on the Z, Scott!

madwi · 04-16-2021, 10:21 AM

Quote:

Originally Posted by axmea?

Great work done on the Z, Scott!

Thank Raf!

madwi · 04-22-2021, 05:18 PM

Well, the first conversation is not off to a good start with Compturbo. This is their response for their **** breaking at 6k miles.

Hi Scott,

Sorry for the late reply was out of town Monday and Tuesday just catching up now on emails. We have and disassembled and inspected the turbocharger and it looks like the internals are not usable sadly this was the worst case scenario however we can replace the CHRA it would take about 3 weeks so we can hit that mid June deadline for you. The cost for the CHRA is about $1200.00 give us a call and ask for Ernie if you need more information.

Thanks,

Juan

gbrettin · 04-22-2021, 05:30 PM

Quote:

Originally Posted by madwi

Well, the first conversation is not off to a good start with Compturbo. This is their response for their **** breaking at 6k miles.

Hi Scott,

Sorry for the late reply was out of town Monday and Tuesday just catching up now on emails. We have and disassembled and inspected the turbocharger and it looks like the internals are not usable sadly this was the worst case scenario however we can replace the CHRA it would take about 3 weeks so we can hit that mid June deadline for you. The cost for the CHRA is about $1200.00 give us a call and ask for Ernie if you need more information.

Thanks,

Juan

Tell Juan to eat a fat Juan. Get a different turbo brand.

madwi · 04-22-2021, 05:37 PM

Quote:

Originally Posted by gbrettin

Tell Juan to eat a fat Juan. Get a different turbo brand.

Looking at garret turbos now.

madwi · 04-22-2021, 05:44 PM

CJM oil pan should be here in a couple of weeks, had the -10AN ports installed for oil fed turbo.

Rusty · 04-22-2021, 06:49 PM

I was never a big fan of those greaseable turbo's. When I was at Elliott TurboMachinery. I've seen grease get cooked and turn into wax and asphalt around bearings. If you are going with a different turbo company. Tell the chitheads that you want the old turbo back, uncleaned. This way you can look at the grease and see what condition it is in.

madwi · 04-22-2021, 11:47 PM

Quote:

Originally Posted by Rusty

I was never a big fan of those greaseable turbo's. When I was at Elliott TurboMachinery. I've seen grease get cooked and turn into wax and asphalt around bearings. If you are going with a different turbo company. Tell the chitheads that you want the old turbo back, uncleaned. This way you can look at the grease and see what condition it is in.

Yeah, Im not a fan of them at all.

Hotrodz · 04-23-2021, 10:28 AM

Have you talk to Elmo about the turbo he is using?

madwi · 04-23-2021, 11:49 AM

Quote:

Originally Posted by Hotrodz

Have you talk to Elmo about the turbo he is using?

Not yet, it is on my to-do list!

madwi · 04-23-2021, 11:49 AM

I need to hit up sasha and ask what should fit the manifold.

Spooler · 04-23-2021, 12:07 PM

Ask Al- (Solidius on the forum). He is using an oil fed turbo with an Exa pump.

04-15-2021, 08:50 PM	#871 (permalink)
madwi A True Z Fanatic Join Date: Sep 2012 Location: West Michigan Posts: 31,410 Drives: Granma red Z Rep Power: 2684429	Put insurance on the car a couple weeks ago and went for a nice cruise around the city. Turbo **** the bed about 300 yds from the house. Ripped the car apart with ZS-carpenter and found the blades had hit the housing. Turbo is sent off to Compturbo for evaluation and fixing. Went to put the FI exhaust on the car and got the wrong part sent from Boosted Performance. Z is on lift back into hibernation. Removed insurance from the Z. JARblue, Rusty, Hotrodz and 7 others like this.

04-16-2021, 02:12 AM	#874 (permalink)
axmea? A True Z Fanatic Join Date: Apr 2012 Location: SoCal Posts: 6,235 Drives: WELL ZED PW 6MT Rep Power: 53241	Great work done on the Z, Scott! Hotrodz, madwi and Zingston like this. __________________ >MyZ's Album< NISMO Convert/ECUTEK/Takeda CAI/F.I. HFC NR CB Carbon/F.I. 34 Row Oil Cooler/4.08 Final Drive /Powertrix+Swifts/Hotchkis/SPL/Whiteline/TWM/Zoom Engineering/EVO-R/AeroJacket Vented CF Fenders + CF Spoiler/Avant Garde-WORK/NST/Morimoto Halo/STi Clear Lenses/Carbon Signal Automotive/RJM Performance/ZSpeed Clutch Flywheel CSC delete

04-22-2021, 05:18 PM	#876 (permalink)
madwi A True Z Fanatic Join Date: Sep 2012 Location: West Michigan Posts: 31,410 Drives: Granma red Z Rep Power: 2684429	Well, the first conversation is not off to a good start with Compturbo. This is their response for their **** breaking at 6k miles. Hi Scott, Sorry for the late reply was out of town Monday and Tuesday just catching up now on emails. We have and disassembled and inspected the turbocharger and it looks like the internals are not usable sadly this was the worst case scenario however we can replace the CHRA it would take about 3 weeks so we can hit that mid June deadline for you. The cost for the CHRA is about $1200.00 give us a call and ask for Ernie if you need more information. Thanks, Juan gbrettin, JARblue, Rusty and 7 others like this.

04-22-2021, 05:44 PM	#879 (permalink)
madwi A True Z Fanatic Join Date: Sep 2012 Location: West Michigan Posts: 31,410 Drives: Granma red Z Rep Power: 2684429	CJM oil pan should be here in a couple of weeks, had the -10AN ports installed for oil fed turbo. JARblue, Rusty, Hotrodz and 4 others like this.

04-22-2021, 06:49 PM	#880 (permalink)
Rusty Ronin Samurai - Assassin Join Date: Dec 2011 Location: Fayettenam,Pennsyltucky Age: 68 Posts: 35,180 Drives: 2011 Nismo GM 6M Rep Power: 2684437	I was never a big fan of those greaseable turbo's. When I was at Elliott TurboMachinery. I've seen grease get cooked and turn into wax and asphalt around bearings. If you are going with a different turbo company. Tell the chitheads that you want the old turbo back, uncleaned. This way you can look at the grease and see what condition it is in. gbrettin, Hotrodz, madwi and 4 others like this. __________________ 浪人 - 殺し屋 "The Difficult Anytime, The Impossible By Appointment Only" http://www.the370z.com/members-370z-...o-journal.html

04-23-2021, 10:28 AM	#882 (permalink)
Hotrodz A True Z Fanatic Join Date: Aug 2012 Location: NW, AZ Posts: 9,330 Drives: 10 Nissan 370z Nismo Rep Power: 2684385	Have you talk to Elmo about the turbo he is using? madwi, Spooler and BettyZ like this. __________________ *Fast Intentions TT Installed and Tuned by Seb at SpecialtyZ 610whp 560tq:\|Fast Intentions 3" TT-TDX*\|SpecialtyZ/Fast Intentions 72 Row Oil Cooler\|SZ 6 Puck Clutch & Flywheel\|3GsCustoms\|Z1\|Wavetrac\|Hotchkis\|Whiteline \|Blitz\|Fortune Auto 500\|Fujimura\|SPL\|H&R\|TK\|TWM\|RPM Rollbar\|Sparco\|Next Level Performance\|TrackSpec\|AeroFlow Dynamics\|Pioneer\|

04-23-2021, 11:49 AM	#884 (permalink)
madwi A True Z Fanatic Join Date: Sep 2012 Location: West Michigan Posts: 31,410 Drives: Granma red Z Rep Power: 2684429	I need to hit up sasha and ask what should fit the manifold.

04-23-2021, 12:07 PM	#885 (permalink)
Spooler A True Z Fanatic Join Date: Jun 2014 Location: Ga Posts: 13,798 Drives: 2013 Nismo 370z Rep Power: 2684392	Ask Al- (Solidius on the forum). He is using an oil fed turbo with an Exa pump. madwi likes this.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Open Dump exhaust	Wabbyyy	Intake/Exhaust	14	10-04-2019 11:02 AM
Gen Coupe dump 4turbo	7speed	Other Vehicles	17	07-29-2014 10:58 AM
ECU Dump ?'s	ZScr3am	Tuning	2	10-27-2012 05:40 PM
ECU dump turnaround time	SS_Firehawk	Tuning	9	05-07-2012 09:36 PM
My Beltronics RX65 Took a Dump!	Rhinetom	Nissan 370Z General Discussions	12	01-07-2011 11:45 AM