Madwi's picture dump and crap

madwi · 02-14-2019, 12:10 AM

Quote:

Originally Posted by old guy

Every time y'all do some of these mods ( sway, rotors, brake lines & so on ) I think yeah ok...... but do I want to start down that rabbit hole

It is a pain in the rear end, especially when life demands attention every 20 minutes.

Rusty · 02-14-2019, 08:43 AM

Quote:

Originally Posted by old guy

Every time y'all do some of these mods ( sway, rotors, brake lines & so on ) I think yeah ok...... but do I want to start down that rabbit hole

It depends on what you what to get out of it. Nice looking DD, A fast DD, Track rat, etc. But once you start. Sometimes things go sideways.

Then you go down the rabbit.

Hotrodz · 02-14-2019, 09:51 AM

Quote:

Originally Posted by Rusty

It depends on what you what to get out of it. Nice looking DD, A fast DD, Track rat, etc. But once you start. Sometimes things go sideways.

Then you go down the rabbit.

The minimum suspension mod requirements to meet this requirement: front sway bar, FUCA, rear camber arms and coilovers. After that we will see you at the bottom of the rabbit hole.

madwi · 02-17-2019, 05:02 AM

Quote:

Originally Posted by old guy

Mad, did you cut the hood and install the vents?

I'll snag some pics today...

madwi · 02-17-2019, 06:30 AM

madwi · 02-17-2019, 06:34 AM

Still need to do passenger side. I have a brand new pack of discs for the grinder and I cant find them. I tore everything in the garage and basement apart looking for them.

Will have to see if I can find some locally today.
EW complains about me not letting him help work on the car so I'll have to let him give me a hand when it comes time to riveting the vents in place.

jwick · 02-17-2019, 01:05 PM

Quote:

Originally Posted by madwi

Still need to do passenger side. I have a brand new pack of discs for the grinder and I cant find them. I tore everything in the garage and basement apart looking for them.

Will have to see if I can find some locally today.

EW complains about me not letting him help work on the car so I'll have to let him give me a hand when it comes time to riveting the vents in place.

I recommend a reamer on those cut edges. I have a cheap one that works wonders. You going to coat the cut edge with something?

madwi · 02-17-2019, 01:42 PM

Quote:

Originally Posted by jwick

I recommend a reamer on those cut edges. I have a cheap one that works wonders. You going to coat the cut edge with something?

I have a sheet metal deburr tool that I will break the edges with. Yes to coating the edges. Not sure what to use. I need to stroll about the paint aisle at the parts store.

jwick · 02-17-2019, 02:48 PM

Quote:

Originally Posted by madwi

I have a sheet metal deburr tool that I will break the edges with. Yes to coating the edges. Not sure what to use. I need to stroll about the paint aisle at the parts store.

You could cold galvanize it. They sell it in a spray can at Home of Pot. I just spray some of it in a disposable cup and brush it on.

Be careful with where you set the cup down. It eats thru a solo plastic cup of you just leave it sitting there.

old guy · 02-17-2019, 05:21 PM

Mad that looks great ! Is there going to be a center vent? I think it looks good without it.

Rusty · 02-17-2019, 07:49 PM

Quote:

Originally Posted by jwick

You could cold galvanize it. They sell it in a spray can at Home of Pot. I just spray some of it in a disposable cup and brush it on.

Be careful with where you set the cup down. It eats thru a solo plastic cup of you just leave it sitting there.

That's what I did.

jwick · 02-17-2019, 09:09 PM

Quote:

Originally Posted by Rusty

That's what I did.

That’s how we did the rivet holes on the track car when we deleted the sunroof.

madwi · 02-18-2019, 01:16 AM

Quote:

Originally Posted by old guy

Mad that looks great ! Is there going to be a center vent? I think it looks good without it.

No center vent for me right now.

madwi · 02-21-2019, 01:14 PM

Had a few minutes this afternoon and got the holes cut out in the hood.

carlitos_370z · 02-21-2019, 02:25 PM

Damn bro your car looks amazing

02-17-2019, 06:30 AM	#425 (permalink)
madwi A True Z Fanatic Join Date: Sep 2012 Location: West Michigan Posts: 31,410 Drives: Granma red Z Rep Power: 2684429	gbrettin, Rusty, Memphis370Z and 3 others like this.

02-17-2019, 06:34 AM	#426 (permalink)
madwi A True Z Fanatic Join Date: Sep 2012 Location: West Michigan Posts: 31,410 Drives: Granma red Z Rep Power: 2684429	Still need to do passenger side. I have a brand new pack of discs for the grinder and I cant find them. I tore everything in the garage and basement apart looking for them. Will have to see if I can find some locally today. EW complains about me not letting him help work on the car so I'll have to let him give me a hand when it comes time to riveting the vents in place. jwick, Rusty, jchammond and 2 others like this. Last edited by madwi; 02-17-2019 at 06:36 AM.

02-17-2019, 05:21 PM	#430 (permalink)
old guy A True Z Fanatic Join Date: Apr 2015 Location: S.E. Michigan Age: 68 Posts: 2,710 Drives: 13 magma touring Rep Power: 2684369	Mad that looks great ! Is there going to be a center vent? I think it looks good without it. madwi and jchammond like this. __________________ I better walk before they make me run....

02-21-2019, 01:14 PM	#434 (permalink)
madwi A True Z Fanatic Join Date: Sep 2012 Location: West Michigan Posts: 31,410 Drives: Granma red Z Rep Power: 2684429	Had a few minutes this afternoon and got the holes cut out in the hood. gbrettin, Rusty, axmea? and 5 others like this.

02-21-2019, 02:25 PM	#435 (permalink)
carlitos_370z A True Z Fanatic Join Date: Jul 2013 Location: Puerto Rico Posts: 7,157 Drives: 13 Nissan 370Z SP M6 Rep Power: 7586	Damn bro your car looks amazing Hotrodz, madwi, sx moneypit and 1 others like this.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Open Dump exhaust	Wabbyyy	Intake/Exhaust	14	10-04-2019 11:02 AM
Gen Coupe dump 4turbo	7speed	Other Vehicles	17	07-29-2014 10:58 AM
ECU Dump ?'s	ZScr3am	Tuning	2	10-27-2012 05:40 PM
ECU dump turnaround time	SS_Firehawk	Tuning	9	05-07-2012 09:36 PM
My Beltronics RX65 Took a Dump!	Rhinetom	Nissan 370Z General Discussions	12	01-07-2011 11:45 AM