Madwi's picture dump and crap

madwi · 09-10-2018, 09:15 PM

Quote:

Originally Posted by Rusty

Is that when JAR was driving and pulled over in front of us?

This was on the way down to zdayz.

madwi · 09-10-2018, 09:16 PM

Quote:

Originally Posted by Rusty

The logo must be something new. Mine and EW doesn't have.

You could have used a 2" hole saw to cut the rubber in the center. didn't show you anything that I taught him?

Maybe you guys installed the bushing backwards

madwi · 09-10-2018, 09:18 PM

Need to put a few coffers into the garage fund after recuperating from the turbo and supporting mods purchases. I would like to buy a rolling jack for the lift so I dont have to engineer a solution for taking the wheels off while on the lift.

JARblue · 09-10-2018, 09:33 PM

LOL yea...

I've been looking at this one: https://www.harborfreight.com/3-ton-...ump-64241.html
I saw it on sale once, years ago for $159. Probably just bite the bullet soon.

madwi · 09-10-2018, 09:36 PM

Quote:

Originally Posted by JARblue

LOL yea...

I've been looking at this one: https://www.harborfreight.com/3-ton-...ump-64241.html
I saw it on sale once, years ago for $159. Probably just bite the bullet soon.

Ill buy you a couple of those jacks if you pick one of these up for me.

JARblue · 09-10-2018, 09:38 PM

Oh now I see what you mean by rolling lol... that one is just a hair nicer and more convenient than the one I posted. Probably only a hair more expensive, too

madwi · 09-10-2018, 09:45 PM

Quote:

Originally Posted by JARblue

Oh now I see what you mean by rolling lol... that one is just a hair nicer and more convenient than the one I posted. Probably only a hair more expensive, too

A few pennies, maybe.

madwi · 09-10-2018, 09:47 PM

Quote:

Originally Posted by JARblue

LOL yea...

I've been looking at this one: https://www.harborfreight.com/3-ton-...ump-64241.html
I saw it on sale once, years ago for $159. Probably just bite the bullet soon.

I want to say I just saw the daytonas on sale at HF when we were there the other day.

jwick · 09-10-2018, 09:51 PM

Quote:

Originally Posted by madwi

Thanks, man. It is a lot of fun, lots of little things to do yet though.

Oh I remember those days. Chuck and I did mine in two weekends. One weekend of tear down and mechanical and the second was fuel and electronics. Fired up first time!

madwi · 09-10-2018, 09:56 PM

Quote:

Originally Posted by jwick

Oh I remember those days. Chuck and I did mine in two weekends. One weekend of tear down and mechanical and the second was fuel and electronics. Fired up first time!

I hope she fires up on the first try! i have to admit I am pretty nervous and hitting that button will be suspenseful to say the least.

jwick · 09-10-2018, 10:45 PM

Quote:

Originally Posted by madwi

I hope she fires up on the first try! i have to admit I am pretty nervous and hitting that button will be suspenseful to say the least.

Just don’t rush it and double check your work before you move on.

madwi · 09-10-2018, 10:53 PM

Quote:

Originally Posted by jwick

Just don’t rush it and double check your work before you move on.

JC and I work in a similar fashion. We are not very fast at doing jobs but they are done correctly before moving on. I have a big to do checklist that I cross items off of. Everything will absolutely get a second and third look over before I feel confident in hitting the starter.

jwick · 09-10-2018, 11:16 PM

Quote:

Originally Posted by madwi

JC and I work in a similar fashion. We are not very fast at doing jobs but they are done correctly before moving on. I have a big to do checklist that I cross items off of. Everything will absolutely get a second and third look over before I feel confident in hitting the starter.

We were completely anal about it. I bet I have nothing short of a hundred zip ties securing stuff, stopping rattles, protecting heat, etc.

madwi · 09-10-2018, 11:20 PM

Quote:

Originally Posted by jwick

We were completely anal about it. I bet I have nothing short of a hundred zip ties securing stuff, stopping rattles, protecting heat, etc.

The heat shielding and routing of lines is one of my main concerns.

jwick · 09-10-2018, 11:23 PM

I ran all my pneumatic lines thru thermotec heat sleeve. Worked great.

09-10-2018, 09:18 PM	#303 (permalink)
madwi A True Z Fanatic Join Date: Sep 2012 Location: West Michigan Posts: 31,410 Drives: Granma red Z Rep Power: 2684429	Need to put a few coffers into the garage fund after recuperating from the turbo and supporting mods purchases. I would like to buy a rolling jack for the lift so I dont have to engineer a solution for taking the wheels off while on the lift. gbrettin, JARblue, old guy and 1 others like this.

09-10-2018, 09:33 PM	#304 (permalink)
JARblue A True Z Fanatic Join Date: Mar 2011 Location: Austin, TX Age: 43 Posts: 36,450 Drives: 11 Z34, 98 E36 M3 Rep Power: 2684440	LOL yea... I've been looking at this one: https://www.harborfreight.com/3-ton-...ump-64241.html I saw it on sale once, years ago for $159. Probably just bite the bullet soon. madwi likes this. __________________ 2011 370Z 6MT Sport Gun Metallic \| ARC \| CJM \| Ecutek \| FI \| Fujimura \| R2C \| SPL \| Stillen \| TWM \| Z1 \| ZSpeed \|

09-10-2018, 09:38 PM	#306 (permalink)
JARblue A True Z Fanatic Join Date: Mar 2011 Location: Austin, TX Age: 43 Posts: 36,450 Drives: 11 Z34, 98 E36 M3 Rep Power: 2684440	Oh now I see what you mean by rolling lol... that one is just a hair nicer and more convenient than the one I posted. Probably only a hair more expensive, too madwi likes this. __________________ 2011 370Z 6MT Sport Gun Metallic \| ARC \| CJM \| Ecutek \| FI \| Fujimura \| R2C \| SPL \| Stillen \| TWM \| Z1 \| ZSpeed \|

09-10-2018, 11:23 PM	#315 (permalink)
jwick A True Z Fanatic Join Date: Dec 2010 Location: Houston Posts: 14,532 Drives: '10 G37 6MT Rep Power: 2465056	I ran all my pneumatic lines thru thermotec heat sleeve. Worked great. madwi likes this. __________________ '10 G37T 6MT Graphite/Graphite - BP - G37T Build

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Open Dump exhaust	Wabbyyy	Intake/Exhaust	14	10-04-2019 11:02 AM
Gen Coupe dump 4turbo	7speed	Other Vehicles	17	07-29-2014 10:58 AM
ECU Dump ?'s	ZScr3am	Tuning	2	10-27-2012 05:40 PM
ECU dump turnaround time	SS_Firehawk	Tuning	9	05-07-2012 09:36 PM
My Beltronics RX65 Took a Dump!	Rhinetom	Nissan 370Z General Discussions	12	01-07-2011 11:45 AM