Madwi's picture dump and crap

madwi · 07-12-2020, 09:46 PM

I like this one.

madwi · 07-16-2020, 03:42 PM

Picked up a Raceseng Vision knob in Red Translucent and a Tow hook in black/grey. Swatches from Prismatic powders came in also so I might start looking for a set of calipers I can get powder coated then rebuilt.

madwi · 08-20-2020, 02:17 PM

I have the next 11 days off so I decided I would start it off by learning to powdercoat. Pretty simple process.
I sprayed a coilover spanner wrench and gave it a shot of racing red from Prismatic. I really like this color up next to magma.

madwi · 08-20-2020, 02:26 PM

The color swatch and the color that the wrench turned out are spot on matches. Hope the other colors are the same.

gbrettin · 08-20-2020, 04:06 PM

Dont you have some exhaust v-bands you need to be doing?

madwi · 08-20-2020, 04:08 PM

Quote:

Originally Posted by gbrettin

Dont you have some exhaust v-bands you need to be doing?

I just bought Elmos FI 3" CF cans exhaust, it is buried in MAM's shop.

gbrettin · 08-20-2020, 04:24 PM

Quote:

Originally Posted by madwi

I just bought Elmos FI 3" CF cans exhaust, it is buried in MAM's shop.

Do you have F.I. 2.5" exhaust?

madwi · 08-21-2020, 01:42 AM

Quote:

Originally Posted by gbrettin

Do you have F.I. 2.5" exhaust?

I do, with SS cans, non-res version.

Hotrodz · 08-21-2020, 11:10 AM

You will get better performance from the 3" exhaust but the 2.5" is louder and sounds better in my opinion. No much better and mostly just different in pitch and tone!

Sent from my SM-G965U using Tapatalk

gbrettin · 08-21-2020, 03:31 PM

Could have done an electric dump or boost actuated dump for a fraction of the price. BUT... his exhaust is new, I'm sure it will look good.

I have exhaust hardware if you need it, bolts and gaskets. Just drive down and pick it up... just bring the other 370z hood.

(Ill swing up for the hood if you are doing the vbands)

madwi · 08-21-2020, 04:32 PM

Quote:

Originally Posted by gbrettin

Could have done an electric dump or boost actuated dump for a fraction of the price. BUT... his exhaust is new, I'm sure it will look good.

I have exhaust hardware if you need it, bolts and gaskets. Just drive down and pick it up... just bring the other 370z hood.

(Ill swing up for the hood if you are doing the vbands)

I wanted the CF cans from the start and didnt want to pay the premium. I said F it, I want to turn up the boost so I was able to justify the 3" to my wallet. That hood is all you man, I have no way to move it otherwise it was going to the dump.

jwick · 08-21-2020, 08:38 PM

Quote:

Originally Posted by madwi

I wanted the CF cans from the start and didnt want to pay the premium. I said F it, I want to turn up the boost so I was able to justify the 3" to my wallet. That hood is all you man, I have no way to move it otherwise it was going to the dump.

Are you swapping just the cans or did you find a whole 3” exhaust?

madwi · 08-22-2020, 01:33 AM

Quote:

Originally Posted by jwick

Are you swapping just the cans or did you find a whole 3” exhaust?

whole 3" minus lead pipes.

jwick · 08-22-2020, 02:24 PM

Quote:

Originally Posted by madwi

whole 3" minus lead pipes.

How are you planning to make the transition from the downpipe? Get it refabricated?

-ZS-Carpenter · 08-21-2020, 04:36 PM

Quote:

Originally Posted by gbrettin

just bring the other 370z hood.

As heavy as that thing is he might need to get permits to move it

08-21-2020, 11:10 AM	#9 (permalink)
Hotrodz A True Z Fanatic Join Date: Aug 2012 Location: NW, AZ Posts: 9,330 Drives: 10 Nissan 370z Nismo Rep Power: 2684385	You will get better performance from the 3" exhaust but the 2.5" is louder and sounds better in my opinion. No much better and mostly just different in pitch and tone! Sent from my SM-G965U using Tapatalk __________________ *Fast Intentions TT Installed and Tuned by Seb at SpecialtyZ 610whp 560tq:\|Fast Intentions 3" TT-TDX*\|SpecialtyZ/Fast Intentions 72 Row Oil Cooler\|SZ 6 Puck Clutch & Flywheel\|3GsCustoms\|Z1\|Wavetrac\|Hotchkis\|Whiteline \|Blitz\|Fortune Auto 500\|Fujimura\|SPL\|H&R\|TK\|TWM\|RPM Rollbar\|Sparco\|Next Level Performance\|TrackSpec\|AeroFlow Dynamics\|Pioneer\|

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Open Dump exhaust	Wabbyyy	Intake/Exhaust	14	10-04-2019 10:02 AM
Gen Coupe dump 4turbo	7speed	Other Vehicles	17	07-29-2014 09:58 AM
ECU Dump ?'s	ZScr3am	Tuning	2	10-27-2012 04:40 PM
ECU dump turnaround time	SS_Firehawk	Tuning	9	05-07-2012 08:36 PM
My Beltronics RX65 Took a Dump!	Rhinetom	Nissan 370Z General Discussions	12	01-07-2011 10:45 AM

07-12-2020, 09:46 PM	#1 (permalink)
madwi A True Z Fanatic Join Date: Sep 2012 Location: West Michigan Posts: 31,410 Drives: Granma red Z Rep Power: 2684429	I like this one.

07-16-2020, 03:42 PM	#2 (permalink)
madwi A True Z Fanatic Join Date: Sep 2012 Location: West Michigan Posts: 31,410 Drives: Granma red Z Rep Power: 2684429	Picked up a Raceseng Vision knob in Red Translucent and a Tow hook in black/grey. Swatches from Prismatic powders came in also so I might start looking for a set of calipers I can get powder coated then rebuilt.

08-20-2020, 02:17 PM	#3 (permalink)
madwi A True Z Fanatic Join Date: Sep 2012 Location: West Michigan Posts: 31,410 Drives: Granma red Z Rep Power: 2684429	I have the next 11 days off so I decided I would start it off by learning to powdercoat. Pretty simple process. I sprayed a coilover spanner wrench and gave it a shot of racing red from Prismatic. I really like this color up next to magma.

08-20-2020, 02:26 PM	#4 (permalink)
madwi A True Z Fanatic Join Date: Sep 2012 Location: West Michigan Posts: 31,410 Drives: Granma red Z Rep Power: 2684429	The color swatch and the color that the wrench turned out are spot on matches. Hope the other colors are the same.

08-20-2020, 04:06 PM	#5 (permalink)
gbrettin A True Z Fanatic Join Date: Oct 2010 Location: Portage, MI Posts: 2,296 Drives: Tricycle Rep Power: 589151	Dont you have some exhaust v-bands you need to be doing?

08-21-2020, 03:31 PM	#10 (permalink)
gbrettin A True Z Fanatic Join Date: Oct 2010 Location: Portage, MI Posts: 2,296 Drives: Tricycle Rep Power: 589151	Could have done an electric dump or boost actuated dump for a fraction of the price. BUT... his exhaust is new, I'm sure it will look good. I have exhaust hardware if you need it, bolts and gaskets. Just drive down and pick it up... just bring the other 370z hood. (Ill swing up for the hood if you are doing the vbands)