Madwi's picture dump and crap

soill370z · 09-30-2019, 04:19 AM

Awesome build man i just looked through all the pages, do you get clunking noises from the solid diff mounts and z1 tranny mount?

madwi · 09-30-2019, 06:45 AM

There is definitely a bit of clunk. Gonna see how it all plays together when the cjm engine mounts go in.

soill370z · 09-30-2019, 08:11 AM

Quote:

Originally Posted by madwi

there is definitely a bit of clunk. Gonna see how it all plays together when the cjm engine mounts go in.

thanks for the reply i have z1 engine and trans mounts, coolerworx shifter and spl diff bushings and z1 subframe collars and there is quite a bit of clunk mainly driveshaft play im hearing

Rusty · 09-30-2019, 11:07 AM

Quote:

Originally Posted by soill370z

thanks for the reply i have z1 engine and trans mounts, coolerworx shifter and spl diff bushings and z1 subframe collars and there is quite a bit of clunk mainly driveshaft play im hearing

I hear the 1st to 2nd, and the 2nd to 3rd clunk if I'm taking it easy.

Spooler · 09-30-2019, 09:23 PM

Quote:

Originally Posted by madwi

There is definitely a bit of clunk. Gonna see how it all plays together when the cjm engine mounts go in.

LOL, you get a whole new level of vibration. It doesn't bother me much at all. You will hear the starter more and you will tickle your feet.

Hotrodz · 09-30-2019, 03:59 PM

I think mine is rear axle clunk!

jwick · 09-30-2019, 08:06 PM

Quote:

Originally Posted by Hotrodz

I think mine is rear axle clunk!

I think mine is either strut bar knocking on the hood (bar is aftermarket on a G) or I have some part of turbo piping that knocks against the subframe or undershroud. I’ve hunted and used nothing short of 75-100 zip ties securing and placing padding between stuff with no luck. I just live with it.

Hotrodz · 09-30-2019, 08:39 PM

Quote:

Originally Posted by jwick

I think mine is either strut bar knocking on the hood (bar is aftermarket on a G) or I have some part of turbo piping that knocks against the subframe or undershroud. I’ve hunted and used nothing short of 75-100 zip ties securing and placing padding between stuff with no luck. I just live with it.

I going to have Seb look into it when I take the car to him.

Sent from my SM-G965U using Tapatalk

jwick · 09-30-2019, 08:58 PM

Quote:

Originally Posted by Hotrodz

I going to have Seb look into it when I take the car to him.

Sent from my SM-G965U using Tapatalk

I really think it would take taking all the intercooler piping off to try and see if it’s been rubbing/knocking anywhere. **** that noise. Just drive it until it blows up!

Hotrodz · 09-30-2019, 09:17 PM

Quote:

Originally Posted by jwick

I really think it would take taking all the intercooler piping off to try and see if it’s been rubbing/knocking anywhere. **** that noise. Just drive it until it blows up!

My man! Agreed!!! It only bother me when I drive on the street. I don't hear it at the track. I a sports car noise is part of the deal kind of like a blown motor if you are driving it like it meant to be driven.

Sent from my SM-G965U using Tapatalk

soill370z · 10-01-2019, 03:20 AM

Thanks guys! I was just curious because the car has under 18k miles so i knew nothing was worn out lol, race car i guess lol

jwick · 10-01-2019, 07:25 AM

Quote:

Originally Posted by soill370z

Thanks guys! I was just curious because the car has under 18k miles so i knew nothing was worn out lol, race car i guess lol

Anytime you modify a car you will pick up nosies. **** I had leather added to the truck and not one seat rattles.

madwi · 10-05-2019, 04:52 PM

Gave a ride to EW's buddy this morning and then cleaned her up a bit. It was a great day to be outside in the garage. Amazing weather for this time of year and I plan to soak it all up before it turns cold.

gbrettin · 10-05-2019, 05:01 PM

Your garage looks great!

Sent from my SM-G930P using Tapatalk

madwi · 10-05-2019, 05:03 PM

Half is still messy, but it is coming along! Thanks!

09-30-2019, 03:59 PM	#6 (permalink)
Hotrodz A True Z Fanatic Join Date: Aug 2012 Location: NW, AZ Posts: 9,330 Drives: 10 Nissan 370z Nismo Rep Power: 2684385	I think mine is rear axle clunk! __________________ *Fast Intentions TT Installed and Tuned by Seb at SpecialtyZ 610whp 560tq:\|Fast Intentions 3" TT-TDX*\|SpecialtyZ/Fast Intentions 72 Row Oil Cooler\|SZ 6 Puck Clutch & Flywheel\|3GsCustoms\|Z1\|Wavetrac\|Hotchkis\|Whiteline \|Blitz\|Fortune Auto 500\|Fujimura\|SPL\|H&R\|TK\|TWM\|RPM Rollbar\|Sparco\|Next Level Performance\|TrackSpec\|AeroFlow Dynamics\|Pioneer\|

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Open Dump exhaust	Wabbyyy	Intake/Exhaust	14	10-04-2019 10:02 AM
Gen Coupe dump 4turbo	7speed	Other Vehicles	17	07-29-2014 09:58 AM
ECU Dump ?'s	ZScr3am	Tuning	2	10-27-2012 04:40 PM
ECU dump turnaround time	SS_Firehawk	Tuning	9	05-07-2012 08:36 PM
My Beltronics RX65 Took a Dump!	Rhinetom	Nissan 370Z General Discussions	12	01-07-2011 10:45 AM

09-30-2019, 04:19 AM	#1 (permalink)
soill370z Base Member Join Date: Mar 2015 Location: illinois Posts: 134 Drives: 13 nismo 370z Rep Power: 11	Awesome build man i just looked through all the pages, do you get clunking noises from the solid diff mounts and z1 tranny mount?

09-30-2019, 06:45 AM	#2 (permalink)
madwi A True Z Fanatic Join Date: Sep 2012 Location: West Michigan Posts: 31,410 Drives: Granma red Z Rep Power: 2684429	There is definitely a bit of clunk. Gonna see how it all plays together when the cjm engine mounts go in.

10-01-2019, 03:20 AM	#11 (permalink)
soill370z Base Member Join Date: Mar 2015 Location: illinois Posts: 134 Drives: 13 nismo 370z Rep Power: 11	Thanks guys! I was just curious because the car has under 18k miles so i knew nothing was worn out lol, race car i guess lol

10-05-2019, 04:52 PM	#13 (permalink)
madwi A True Z Fanatic Join Date: Sep 2012 Location: West Michigan Posts: 31,410 Drives: Granma red Z Rep Power: 2684429	Gave a ride to EW's buddy this morning and then cleaned her up a bit. It was a great day to be outside in the garage. Amazing weather for this time of year and I plan to soak it all up before it turns cold.

10-05-2019, 05:01 PM	#14 (permalink)
gbrettin A True Z Fanatic Join Date: Oct 2010 Location: Portage, MI Posts: 2,296 Drives: Tricycle Rep Power: 589151	Your garage looks great! Sent from my SM-G930P using Tapatalk

10-05-2019, 05:03 PM	#15 (permalink)
madwi A True Z Fanatic Join Date: Sep 2012 Location: West Michigan Posts: 31,410 Drives: Granma red Z Rep Power: 2684429	Half is still messy, but it is coming along! Thanks!