Madwi's picture dump and crap

Hotrodz · 03-16-2019, 12:09 PM

^^^Agreed!

Sent from my SM-G965U using Tapatalk

Rusty · 03-16-2019, 01:16 PM

Dd you get the shifter installed?

madwi · 03-16-2019, 01:19 PM

Quote:

Originally Posted by Rusty

Dd you get the shifter installed?

I was able to get the Koken 1/4" ratchet with the ultra short socket on the bolt head that is on top of the shifter bracket. I need to find a small breaker bar to slip over the handle to give me some leverage.

Rusty · 03-16-2019, 01:24 PM

Quote:

Originally Posted by madwi

I was able to get the Koken 1/4" ratchet with the ultra short socket on the bolt head that is on top of the shifter bracket. I need to find a small breaker bar to slip over the handle to give me some leverage.

I take that as a no.

madwi · 03-17-2019, 05:42 PM

Quote:

Originally Posted by Rusty

Dd you get the shifter installed?

gbrettin · 03-26-2019, 08:31 PM

Quote:

Originally Posted by madwi

Man, that's big pimpin'

Sent from my SM-G930P using Tapatalk

madwi · 03-16-2019, 01:22 PM

That thing is a MFer to get at.

madwi · 03-16-2019, 01:39 PM

madwi · 03-16-2019, 01:45 PM

I may snug the trans back up on the bottom and see if I cant get a wrench in through the hole in the cabin. not sure if the brace will be in the way but might be worth a shot.

madwi · 03-16-2019, 01:51 PM

maybe Ill just cut the fucker off.

madwi · 03-16-2019, 06:02 PM

My trophy

redondoaveb · 03-16-2019, 06:26 PM

Quote:

Originally Posted by madwi

My trophy

And it's still in one piece. Are your knuckles?

madwi · 03-16-2019, 06:29 PM

Surprisingly, they are not beat up too bad.

Rusty · 03-16-2019, 07:24 PM

Have that bracket mounted like a set of antlers. Then hang it on the wall.

madwi · 03-16-2019, 07:26 PM

Quote:

Originally Posted by Rusty

Have that bracket mounted like a set of antlers. Then hang it on the wall.

03-16-2019, 12:09 PM	#1 (permalink)
Hotrodz A True Z Fanatic Join Date: Aug 2012 Location: NW, AZ Posts: 9,330 Drives: 10 Nissan 370z Nismo Rep Power: 2684385	^^^Agreed! Sent from my SM-G965U using Tapatalk __________________ *Fast Intentions TT Installed and Tuned by Seb at SpecialtyZ 610whp 560tq:\|Fast Intentions 3" TT-TDX*\|SpecialtyZ/Fast Intentions 72 Row Oil Cooler\|SZ 6 Puck Clutch & Flywheel\|3GsCustoms\|Z1\|Wavetrac\|Hotchkis\|Whiteline \|Blitz\|Fortune Auto 500\|Fujimura\|SPL\|H&R\|TK\|TWM\|RPM Rollbar\|Sparco\|Next Level Performance\|TrackSpec\|AeroFlow Dynamics\|Pioneer\|

03-16-2019, 01:16 PM	#2 (permalink)
Rusty Ronin Samurai - Assassin Join Date: Dec 2011 Location: Fayettenam,Pennsyltucky Age: 69 Posts: 35,418 Drives: 2011 Nismo GM 6M Rep Power: 2684438	Dd you get the shifter installed? __________________ 浪人 - 殺し屋 "The Difficult Anytime, The Impossible By Appointment Only" http://www.the370z.com/members-370z-...o-journal.html

03-16-2019, 07:24 PM	#14 (permalink)
Rusty Ronin Samurai - Assassin Join Date: Dec 2011 Location: Fayettenam,Pennsyltucky Age: 69 Posts: 35,418 Drives: 2011 Nismo GM 6M Rep Power: 2684438	Have that bracket mounted like a set of antlers. Then hang it on the wall. __________________ 浪人 - 殺し屋 "The Difficult Anytime, The Impossible By Appointment Only" http://www.the370z.com/members-370z-...o-journal.html

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Open Dump exhaust	Wabbyyy	Intake/Exhaust	14	10-04-2019 10:02 AM
Gen Coupe dump 4turbo	7speed	Other Vehicles	17	07-29-2014 09:58 AM
ECU Dump ?'s	ZScr3am	Tuning	2	10-27-2012 04:40 PM
ECU dump turnaround time	SS_Firehawk	Tuning	9	05-07-2012 08:36 PM
My Beltronics RX65 Took a Dump!	Rhinetom	Nissan 370Z General Discussions	12	01-07-2011 10:45 AM

03-16-2019, 01:22 PM	#7 (permalink)
madwi A True Z Fanatic Join Date: Sep 2012 Location: West Michigan Posts: 31,410 Drives: Granma red Z Rep Power: 2684429	That thing is a MFer to get at.

03-16-2019, 01:39 PM	#8 (permalink)
madwi A True Z Fanatic Join Date: Sep 2012 Location: West Michigan Posts: 31,410 Drives: Granma red Z Rep Power: 2684429

03-16-2019, 01:45 PM	#9 (permalink)
madwi A True Z Fanatic Join Date: Sep 2012 Location: West Michigan Posts: 31,410 Drives: Granma red Z Rep Power: 2684429	I may snug the trans back up on the bottom and see if I cant get a wrench in through the hole in the cabin. not sure if the brace will be in the way but might be worth a shot.

03-16-2019, 01:51 PM	#10 (permalink)
madwi A True Z Fanatic Join Date: Sep 2012 Location: West Michigan Posts: 31,410 Drives: Granma red Z Rep Power: 2684429	maybe Ill just cut the fucker off.

03-16-2019, 06:02 PM	#11 (permalink)
madwi A True Z Fanatic Join Date: Sep 2012 Location: West Michigan Posts: 31,410 Drives: Granma red Z Rep Power: 2684429	My trophy

03-16-2019, 06:29 PM	#13 (permalink)
madwi A True Z Fanatic Join Date: Sep 2012 Location: West Michigan Posts: 31,410 Drives: Granma red Z Rep Power: 2684429	Surprisingly, they are not beat up too bad.