Madwi's picture dump and crap

jwick · 12-23-2018, 06:26 PM

Quote:

Originally Posted by madwi

just mounted the crap for the defi boost gauge to where the old fuel regulator was.

What are you Teeing off of for your gauge pressure source?

madwi · 12-23-2018, 07:10 PM

Quote:

Originally Posted by jwick

What are you Teeing off of for your gauge pressure source?

I tapped the front of the intake manifold and have a line running to the BOV. I was thinking of t-ing into that.
I bought a 1/4 x 1/4 x 3/16 T fitting.

jwick · 12-23-2018, 07:23 PM

Quote:

Originally Posted by madwi

I tapped the front of the intake manifold and have a line running to the BOV. I was thinking of t-ing into that.
I bought a 1/4 x 1/4 x 3/16 T fitting.

That should work. I just wouldn’t recommend teeing off the line that runs to the waste gates if you are running an EBC teed off that line too. I tapped the manifold and ran a dedicated line to the boost gauge.

madwi · 12-23-2018, 07:28 PM

Quote:

Originally Posted by jwick

That should work. I just wouldn’t recommend teeing off the line that runs to the waste gates if you are running an EBC teed off that line too. I tapped the manifold and ran a dedicated line to the boost gauge.

I thought about doing that but didnt want to pull the manifold off, again.

jchammond · 12-23-2018, 08:22 PM

Quote:

Originally Posted by madwi

I thought about doing that but didnt want to pull the manifold off, again.

rear of manifold@brake booster connection

madwi · 12-23-2018, 08:27 PM

Quote:

Originally Posted by jchammond

rear of manifold@brake booster connection

Front where we tapped in the brass fitting.

jwick · 12-23-2018, 08:29 PM

Quote:

Originally Posted by jchammond

rear of manifold@brake booster connection

Don’t think that will work with the Tee he bought. I think that hose is 3/8 or 1/2”.

A lot of people put a manifold in right there for all their needs. Like this:

https://www.on3performance.com/shop/...ibution-block/

madwi · 12-23-2018, 08:30 PM

Quote:

Originally Posted by jwick

Don’t think that will work with the Tee he bought. A lot of people put a manifold in right there for all their needs. Like this:

https://www.on3performance.com/shop/...ibution-block/

I like that.

madwi · 12-23-2018, 08:31 PM

dang, now I gotta rethink this lol.

jwick · 12-23-2018, 08:36 PM

Quote:

Originally Posted by madwi

dang, now I gotta rethink this lol.

That was just a quick search for vacuum blocks. They make better ones so don’t necessarily buy that one. It’s probably a waste now that you’ve tapped for the BOV. Would of been a good solution at the beginning. Unless you have future needs for pressure source, I wouldn’t bother.

madwi · 12-23-2018, 08:37 PM

Quote:

Originally Posted by jwick

That was just a quick search for vacuum blocks. They make better ones so don’t necessarily buy that one. It’s probably a waste now that you’ve tapped for the BOV. Would of been a good solution at the beginning. Unless you have future needs for pressure source, I wouldn’t bother.

I actually havent cut the line yet.

I am searching google now for the blocks.

jwick · 12-23-2018, 09:10 PM

Quote:

Originally Posted by madwi

I actually havent cut the line yet.

I am searching google now for the blocks.

The company Sasha gets the FMICs from has a pretty good one. Just can’t think of the company name at the moment.

gbrettin · 01-03-2019, 10:59 PM

Just went through this whole build. VERY nice! We will need to meet up next summer.

madwi · 01-04-2019, 12:55 PM

Quote:

Originally Posted by gbrettin

Just went through this whole build. VERY nice! We will need to meet up next summer.

I agree! I cant wait to see that beast of a build you got in the shop!

madwi · 01-14-2019, 07:47 PM

CJ motorsports Motor mounts came in today. Will order poly trans mount in near. Who know when they will go in as I dont want to rip everything apart now that it is almost put back together.

01-03-2019, 10:59 PM	#373 (permalink)
gbrettin A True Z Fanatic Join Date: Oct 2010 Location: Portage, MI Posts: 2,284 Drives: Tricycle Rep Power: 589151	Just went through this whole build. VERY nice! We will need to meet up next summer. Hotrodz and madwi like this.

01-14-2019, 07:47 PM	#375 (permalink)
madwi A True Z Fanatic Join Date: Sep 2012 Location: West Michigan Posts: 31,410 Drives: Granma red Z Rep Power: 2684429	CJ motorsports Motor mounts came in today. Will order poly trans mount in near. Who know when they will go in as I dont want to rip everything apart now that it is almost put back together. gbrettin, Rusty, Hotrodz and 4 others like this.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Open Dump exhaust	Wabbyyy	Intake/Exhaust	14	10-04-2019 11:02 AM
Gen Coupe dump 4turbo	7speed	Other Vehicles	17	07-29-2014 10:58 AM
ECU Dump ?'s	ZScr3am	Tuning	2	10-27-2012 05:40 PM
ECU dump turnaround time	SS_Firehawk	Tuning	9	05-07-2012 09:36 PM
My Beltronics RX65 Took a Dump!	Rhinetom	Nissan 370Z General Discussions	12	01-07-2011 11:45 AM

12-23-2018, 08:31 PM	#369 (permalink)
madwi A True Z Fanatic Join Date: Sep 2012 Location: West Michigan Posts: 31,410 Drives: Granma red Z Rep Power: 2684429	dang, now I gotta rethink this lol.