Madwi's picture dump and crap

madwi · 06-01-2018, 01:17 PM

Kinda nervous about ripping into the fuel tank but it needs to happen. Z1's kit.

old guy · 06-02-2018, 07:56 AM

Looks like a summer of fun!

Rusty · 06-02-2018, 12:32 PM

Quote:

Originally Posted by old guy

Looks like a summer of fun!

Winter project, but Scott doesn't want to work in the garage in the winter time. That should motivated him to put some heat out there.

madwi · 06-02-2018, 01:37 PM

Quote:

Originally Posted by Rusty

Winter project, but Scott doesn't want to work in the garage in the winter time. That should motivated him to put some heat out there.

The way I justified the spending in my head for a new heater is that I spent waaaay more on the turbo kit so the heater can be added to the list of tools needed to install the kit during the winter.

jchammond · 06-02-2018, 05:46 PM

Quote:

Originally Posted by madwi

The way I justified the spending in my head for a new heater is that I spent waaaay more on the turbo kit so the heater can be added to the list of tools needed to install the kit during the winter.

You’ve seen my seasonal garage!
Hopefully that’s gonna change before too long.

Sent from my iPhone using Tapatalk

madwi · 06-02-2018, 01:41 PM

I dont know if I will actually wait until winter though, I am guessing late summer/early fall I will get a jump on it. I need to have contingency plans in place before I begin though.

madwi · 06-02-2018, 09:28 PM

jchammond · 06-02-2018, 09:41 PM

Quote:

Originally Posted by madwi

Now you gonna be like:

Sent from my iPhone using Tapatalk

old guy · 06-02-2018, 11:19 PM

Quote:

Originally Posted by madwi

Damyn son

madwi · 06-13-2018, 06:09 PM

Picked up a Defi boost gauge from the 4sale section.

Ive been trying to figure out which gauges I want to run and this was cheap enough to test out.

Rusty · 06-13-2018, 06:21 PM

Check out Speed Hut gauges. I was surprised by them.

madwi · 06-13-2018, 06:24 PM

Quote:

Originally Posted by Rusty

Check out Speed Hut gauges. I was surprised by them.

I have their nitrous pressure gauge installed, it has worked fine for me. Nicely built.

jchammond · 06-13-2018, 07:59 PM

I can't hardly see that gauge; looks really dark!

madwi · 06-13-2018, 08:02 PM

Quote:

Originally Posted by jchammond

I can't hardly see that gauge; looks really dark!

Looks pretty decent lit up. The amber color is really close to factory, which I like.

madwi · 06-13-2018, 08:10 PM

Yeah, dont want to stress the factory motor.

06-13-2018, 06:21 PM	#11 (permalink)
Rusty Ronin Samurai - Assassin Join Date: Dec 2011 Location: Fayettenam,Pennsyltucky Age: 69 Posts: 35,359 Drives: 2011 Nismo GM 6M Rep Power: 2684438	Check out Speed Hut gauges. I was surprised by them. __________________ 浪人 - 殺し屋 "The Difficult Anytime, The Impossible By Appointment Only" http://www.the370z.com/members-370z-...o-journal.html

06-13-2018, 07:59 PM	#13 (permalink)
jchammond A True Z Fanatic Join Date: Nov 2014 Location: South Carolina Age: 58 Posts: 15,204 Drives: 13’ 370Z TS 7A/T Rep Power: 2684395	I can't hardly see that gauge; looks really dark! __________________ MazWorx built long block \| FI-TT-100 Stage 2.75 \| IPT built 7A/T http://www.the370z.com/members-370z-...s-musings.html

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Open Dump exhaust	Wabbyyy	Intake/Exhaust	14	10-04-2019 10:02 AM
Gen Coupe dump 4turbo	7speed	Other Vehicles	17	07-29-2014 09:58 AM
ECU Dump ?'s	ZScr3am	Tuning	2	10-27-2012 04:40 PM
ECU dump turnaround time	SS_Firehawk	Tuning	9	05-07-2012 08:36 PM
My Beltronics RX65 Took a Dump!	Rhinetom	Nissan 370Z General Discussions	12	01-07-2011 10:45 AM

06-01-2018, 01:17 PM	#1 (permalink)
madwi A True Z Fanatic Join Date: Sep 2012 Location: West Michigan Posts: 31,410 Drives: Granma red Z Rep Power: 2684429	Kinda nervous about ripping into the fuel tank but it needs to happen. Z1's kit.

06-02-2018, 07:56 AM	#2 (permalink)
old guy A True Z Fanatic Join Date: Apr 2015 Location: S.E. Michigan Age: 68 Posts: 2,711 Drives: 13 magma touring Rep Power: 2684370	Looks like a summer of fun!

06-02-2018, 01:41 PM	#6 (permalink)
madwi A True Z Fanatic Join Date: Sep 2012 Location: West Michigan Posts: 31,410 Drives: Granma red Z Rep Power: 2684429	I dont know if I will actually wait until winter though, I am guessing late summer/early fall I will get a jump on it. I need to have contingency plans in place before I begin though.

06-02-2018, 09:28 PM	#7 (permalink)
madwi A True Z Fanatic Join Date: Sep 2012 Location: West Michigan Posts: 31,410 Drives: Granma red Z Rep Power: 2684429

06-13-2018, 06:09 PM	#10 (permalink)
madwi A True Z Fanatic Join Date: Sep 2012 Location: West Michigan Posts: 31,410 Drives: Granma red Z Rep Power: 2684429	Picked up a Defi boost gauge from the 4sale section. Ive been trying to figure out which gauges I want to run and this was cheap enough to test out.

06-13-2018, 08:10 PM	#15 (permalink)
madwi A True Z Fanatic Join Date: Sep 2012 Location: West Michigan Posts: 31,410 Drives: Granma red Z Rep Power: 2684429	Yeah, dont want to stress the factory motor.