King Pearl White 370z build thread custom CF

King · 01-23-2017, 01:23 AM

Traced the carpet onto 3/4 MDF to make the faceplate. I've seen the other posts where people placed subs here and they say you cant do it in one piece, but you definitely can. you have to put it in at a funny angle but it works.

I did some preliminary volume calculations on the size of the box if I used the whole space, It was around 1.2 Cu FT. and I only needed about .8 for the Subs. Lucky, because I couldn't fit the 4" rear speakers in the location of the Stock 3" mounts. So I decided to trim the box down a little and place the 4" rear speakers in the wings of the Faceplate.

Also with the Size of my Subbs the magnet clearance was EXTREMELY tight. So I had to make sure my mounting locations were perfect. I did some AutoCAD drawings and a lot of measurements to make sure my sub locations were perfect. This is how you drill circle holes with high precision.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Official Pearl White 370Z Thread	370z	Nissan 370Z Photos / Spyshots / Video / Media Gallery	3314	05-07-2025 12:05 PM
ZAtlanta_OG's Pearl White build thread	ZAtlanta_OG	Member's 370Z Gallery	93	04-03-2017 09:09 PM
[FOR SALE] NNJ Local trade custom headlights pearl white	Akbubba47	Parts for sale (Private Classifieds)	2	05-12-2014 07:10 AM
Custom headlights on pearl white, let me seeeee!	NOFATCHX	Exterior & Interior	3	01-31-2012 12:06 AM
370Z For Sale Pearl White NISMO 15,xxx Miles $29,000 Custom Stereo	456ntripz	370Z For Sale	15	11-05-2011 12:03 AM

01-23-2017, 01:23 AM	#28 (permalink)
King Base Member Join Date: Oct 2016 Location: NorCal Posts: 86 Drives: 2015 370Z Pearl Rep Power: 9	Traced the carpet onto 3/4 MDF to make the faceplate. I've seen the other posts where people placed subs here and they say you cant do it in one piece, but you definitely can. you have to put it in at a funny angle but it works. I did some preliminary volume calculations on the size of the box if I used the whole space, It was around 1.2 Cu FT. and I only needed about .8 for the Subs. Lucky, because I couldn't fit the 4" rear speakers in the location of the Stock 3" mounts. So I decided to trim the box down a little and place the 4" rear speakers in the wings of the Faceplate. Also with the Size of my Subbs the magnet clearance was EXTREMELY tight. So I had to make sure my mounting locations were perfect. I did some AutoCAD drawings and a lot of measurements to make sure my sub locations were perfect. This is how you drill circle holes with high precision.