hey guys i relocated my battery and ended up 3D printing a little junction box cover thingy along with making a bracket to mount to the firewall. im posting this to find out if anyone would be intrested in buying something like this i did a lot of searching to see what people did and 99% of you just put the stock red cover on it and tip tied it away. not only is that extreamly ugly but its also unsafe. so if i can get some people who would like to see me make these then i would be more then happy to sell them. also the top of the box is removable to easily disconnect everything http://uploads.tapatalk-cdn.com/2016...23e4bb14fd.jpghttp://uploads.tapatalk-cdn.com/2016...4585bf0de9.jpg

Sent from my SM-G920P using Tapatalk

When you wired up switches for the brake lamp and abs which wire did you tap into? I already wired up a switch to the yaw sensor and have that working perfectly.

for the brake lamp i hacked in to the pink wire on terminal 122 of the ecm connector m107 you can wire in a switch or just snip it. i sniped mine. it has no effect on the brake lamp or anything but you can do standing burnouts all day!! and for the abs i went in to the fuse box that is in the engine bay and de-pined it and wired in a inline fuse to a switch..ran the car for a year like this and had 0 problems. now its back under the knife so i changed it all up and made my own harness and took out the entire abs system along with the vdc system. pic is of the wire for the brake lamp.https://uploads.tapatalk-cdn.com/201...d5867a0b1d.jpg

Sent from my SM-G920P using Tapatalk