The "Iron Mike" Chronicles (Project White Dragon Part 2)

bullitt5897 · 03-25-2016, 01:30 PM

Hey everybody we are back with Round two of my build! So many of you are very familiar with my first round of my build "Project White Dragon". As you are aware there were many ups and downs with my build. There were many firsts for our platform as well. So with that said I am wanting to share with all of you the progress of my current build being generously named "Iron Mike" ~ Tony@FastIntentions. Not because of the car being big and badass but more along the principle of Maximizing the efficiency and power out of a small package.

When we last had this build it was through GTM and we all know what happened there with the company... For the sake of the Build I will NOT go into any details or discussions about the former partner in the build, however, I would like to set the stage with what is coming... We have an updated line of partners some new and some you will remember from part 1.

Our Partners: (None of this would be possible without their help!)
DTM Auto Body
Ecutek
Fast Intentions
Forged Performance
RJManufacturing
Rollo Face
Strasse Forged
Seibon
SPC performance
Tial (Xona Rotor)
Tint World (Chamblee, Ga)
Zele Japan

Our Goal:
To make as much power as my motor can hold and these turbos can dish out! Now whether that is 1300whp or 1500+ will all be down to my motor and the new kit. We are here to reset all of the world records yet again. At the same time we want to maintain some semblance of DD capabilities so that others can experience the fun I have with this platform.

The Platform: (What is currently on the car)

Performance:
- GTM 4.5L stroker mid- sleeved Race/Street block
- GTM Billet stroker crank with 96mm stroke
- GTM Arias extreme HD pistons
- GTM 3" Custom True Quad Exhaust
- L19 Head Studs
- Cometic Head Gaskets
- GTM Stage 1 VVEL Heads
- GTM springs and Titanium retainers
- OS Giken Triple Disk Ceramic HR Clutch and Flywheel
- Ecutek Engine Management
- HKS Knock Amplifier
- HKS EVC 6 Boost Controller
- GTM Competition Twin 34 Row Setrab Oil Coolers
- GTM Competition 70mm Radiator
- SPAL 16” Radiator fans and 2 stage controllers
- Upgraded PCV valves
- Upgraded MAF Sensors
- Upgraded MAP Sensor

Exterior:
- Zele Z34 body kit by Zele Japan
- Custom All-Metal wide body conversion (3” total front and 6” total rear) designed by Mike Mixon and built by DTM Auto Body
- Custom JGTC race Inspired front fenders Designed by Mike Mixon and built by DTM Auto Body
- Seibon Carbon Fiber Mirrors
- Seibon Carbon Fiber C-pillars
- VIS Terminator Carbon Fiber Hood
- APR GTC 500
-Custom Headlights By 180Custom

Wheels and Suspension:
-Custom SP5R 3 piece wheels by Strasse Forged
- 20 x 11 -21et and 20 x 12.5 -27et
- Custom Illusion Purple Rolloface BBK
- 8 Piston 16” rotor front and 6 Piston 14” rotor rear
- Toyo T1 sport and R888 tires
-275F and 315R
- SPC Camber kits Front and Rear
- Hotchkis Sway bars Front and Rear
- KW V3 Coilovers Front and Rear

Interior:
- Custom Interior by JPM Coachworks
- Latheworks Titanium Shift Knob
- Shutt Ebrake handle
- Bride Stradia (Venus Edition) x 2
- Status Racing Harness
- Amuse Titanium Harness bar

I.C.E.
- Alpine PDX F4 amplifier
- Alpine PDX M12 amplifier
- Focal 165KRX3 speakers
- Custom Deck and Enclosure by Tint World Chamblee
- Hertz Hi Energy 10” subs x 2
- MB Quart MX-1 High/Low Level Controller

What is Coming: (New Parts being added)
Performance
- Fast Intentions Stage 4 Twin Turbo kit (Xona Rotor 3786)
- RJManufacturing GTR Conversion
- Greddy GTR intake Manifold
- ID 2000CC Injectors
- Fore Innovations Triple Pump (Walbro 485's)
- CJ Motorsports Oil Pan
- Z1 Motor Mounts
- Z1 Trans Mounts
- Z1 Diff upgrade
- Automatic Sport differential with 3.3 FD
- Drive Shaft Shop Pro Level Axles

Pictures of Pre-Surgery:

In The Process Pictures:
Coming Soon

Post Surgery Pictures:
Coming Soon

Events, Marketing, Records and Awards:
Coming Soon

theDreamer · 03-25-2016, 02:05 PM

JARblue · 03-25-2016, 02:14 PM

Where's the face tattoo?

Always enjoyed your build. Go big or go home attitude for sure

Spooler · 03-25-2016, 02:28 PM

Are you going get it completed before Zdayz 2016?

bullitt5897 · 03-25-2016, 03:05 PM

Quote:

Originally Posted by Spooler

Are you going get it completed before Zdayz 2016?

That is the plan...

Spooler · 03-25-2016, 03:30 PM

Quote:

Originally Posted by bullitt5897

That is the plan...

Lucky Axx. My crap is in pieces.

cigarclifford · 03-25-2016, 03:43 PM

Outstanding Bullitt5897

-Clifford

Rusty · 03-25-2016, 03:54 PM

Love to see you make it to ZDAyZ.

bullitt5897 · 03-28-2016, 04:32 PM

Work has already begun!

The APR GTC 500 came off last night. A new Chassis mount wing will take its place. (3 weeks out)

The New Differential is in and ready to be installed.
The New GTR conversion will come in tomorrow or Wednesday.
QTP 3" Cutouts are in.
CJM oil Pan is in.
ID2000 Injectors are in.
NEW EPS 70+mm throttle bodies are on their way.
DSS Pro Level Axles are Ordered. (3 weeks left until arrival)
Custom Difflow Diffuser awaiting new brackets and install.
New Interior work coming soon!
Custom Roll cage *pending*

bullitt5897 · 03-28-2016, 04:33 PM

Fast Intentions Stage 4 kit ships this week!!!!

bullitt5897 · 03-31-2016, 10:49 AM

Update:

Fast Intentions Kit ships Tomorrow!
More Parts Getting installed tonight and tomorrow!
Car Goes into the Shop this weekend!
RJ Manufacturing intake plenum went in last night!
RJ Manufacturing Initial Review

FPenvy · 03-31-2016, 11:24 AM

month and a half until zdayz.......tight timline lol

stg4 FI TT kit. very nice choice

JARblue · 03-31-2016, 11:25 AM

Quote:

Originally Posted by bullitt5897

QTP 3" Cutouts are in.

Very interested to see how often these require maintenance (just a bit of lube from what I hear) to ensure proper operation

VQZ34nismo · 03-31-2016, 11:49 AM

Looking forward to see this badass build at zdayz

Sent from my iPhone using Tapatalk

bullitt5897 · 04-04-2016, 09:42 AM

Update!

Dropped the Car off at Forged Performance on Friday.

Twin Turbo Kit has shipped from Fast Intentions
New DSS Pro Level Axles shipped and should be here tomorrow

03-25-2016, 01:30 PM	#1 (permalink)
bullitt5897 Premium Member Join Date: Jan 2009 Location: North GA Posts: 6,831 Drives: Twin Turbo Z34 Rep Power: 3682	The "Iron Mike" Chronicles (Project White Dragon Part 2) Hey everybody we are back with Round two of my build! So many of you are very familiar with my first round of my build "Project White Dragon". As you are aware there were many ups and downs with my build. There were many firsts for our platform as well. So with that said I am wanting to share with all of you the progress of my current build being generously named "Iron Mike" ~ Tony@FastIntentions. Not because of the car being big and badass but more along the principle of Maximizing the efficiency and power out of a small package. When we last had this build it was through GTM and we all know what happened there with the company... For the sake of the Build I will NOT go into any details or discussions about the former partner in the build, however, I would like to set the stage with what is coming... We have an updated line of partners some new and some you will remember from part 1. Our Partners: (None of this would be possible without their help!) DTM Auto Body Ecutek Fast Intentions Forged Performance RJManufacturing Rollo Face Strasse Forged Seibon SPC performance Tial (Xona Rotor) Tint World (Chamblee, Ga) Zele Japan Our Goal: To make as much power as my motor can hold and these turbos can dish out! Now whether that is 1300whp or 1500+ will all be down to my motor and the new kit. We are here to reset all of the world records yet again. At the same time we want to maintain some semblance of DD capabilities so that others can experience the fun I have with this platform. The Platform: (What is currently on the car) Performance: - GTM 4.5L stroker mid- sleeved Race/Street block - GTM Billet stroker crank with 96mm stroke - GTM Arias extreme HD pistons - GTM 3" Custom True Quad Exhaust - L19 Head Studs - Cometic Head Gaskets - GTM Stage 1 VVEL Heads - GTM springs and Titanium retainers - OS Giken Triple Disk Ceramic HR Clutch and Flywheel - Ecutek Engine Management - HKS Knock Amplifier - HKS EVC 6 Boost Controller - GTM Competition Twin 34 Row Setrab Oil Coolers - GTM Competition 70mm Radiator - SPAL 16” Radiator fans and 2 stage controllers - Upgraded PCV valves - Upgraded MAF Sensors - Upgraded MAP Sensor Exterior: - Zele Z34 body kit by Zele Japan - Custom All-Metal wide body conversion (3” total front and 6” total rear) designed by Mike Mixon and built by DTM Auto Body - Custom JGTC race Inspired front fenders Designed by Mike Mixon and built by DTM Auto Body - Seibon Carbon Fiber Mirrors - Seibon Carbon Fiber C-pillars - VIS Terminator Carbon Fiber Hood - APR GTC 500 -Custom Headlights By 180Custom Wheels and Suspension: -Custom SP5R 3 piece wheels by Strasse Forged - 20 x 11 -21et and 20 x 12.5 -27et - Custom Illusion Purple Rolloface BBK - 8 Piston 16” rotor front and 6 Piston 14” rotor rear - Toyo T1 sport and R888 tires -275F and 315R - SPC Camber kits Front and Rear - Hotchkis Sway bars Front and Rear - KW V3 Coilovers Front and Rear Interior: - Custom Interior by JPM Coachworks - Latheworks Titanium Shift Knob - Shutt Ebrake handle - Bride Stradia (Venus Edition) x 2 - Status Racing Harness - Amuse Titanium Harness bar I.C.E. - Alpine PDX F4 amplifier - Alpine PDX M12 amplifier - Focal 165KRX3 speakers - Custom Deck and Enclosure by Tint World Chamblee - Hertz Hi Energy 10” subs x 2 - MB Quart MX-1 High/Low Level Controller What is Coming: (New Parts being added) Performance - Fast Intentions Stage 4 Twin Turbo kit (Xona Rotor 3786) - RJManufacturing GTR Conversion - Greddy GTR intake Manifold - ID 2000CC Injectors - Fore Innovations Triple Pump (Walbro 485's) - CJ Motorsports Oil Pan - Z1 Motor Mounts - Z1 Trans Mounts - Z1 Diff upgrade - Automatic Sport differential with 3.3 FD - Drive Shaft Shop Pro Level Axles Pictures of Pre-Surgery: In The Process Pictures: Coming Soon Post Surgery Pictures: Coming Soon Events, Marketing, Records and Awards: Coming Soon Carbon_z, jaytirbhaw, JARblue and 13 others like this. __________________ *Shop Cars: 2013 318whp Nismo VspecII 370z SOLD, 2009 1000hp+ 93oct 4.0L TT 370z Fast Intentions STAGE 4 #054* Last edited by bullitt5897; 03-25-2016 at 02:06 PM.

03-25-2016, 02:05 PM	#2 (permalink)
theDreamer A True Z Fanatic Join Date: Feb 2009 Location: Texas Posts: 30,879 Drives: 370z Rep Power: 4210	__________________ theDreamer's Z // Fast Intentions // Uprev // GTM // HKS // TEIN theDreamer's Silvia // URAS // GREDDY Houston Zs // Facebook // Twitter // Instagram

03-25-2016, 02:14 PM	#3 (permalink)
JARblue A True Z Fanatic Join Date: Mar 2011 Location: Austin, TX Age: 43 Posts: 36,450 Drives: 11 Z34, 98 E36 M3 Rep Power: 2684440	Where's the face tattoo? Always enjoyed your build. Go big or go home attitude for sure bullitt5897 and ChaseZ like this. __________________ 2011 370Z 6MT Sport Gun Metallic \| ARC \| CJM \| Ecutek \| FI \| Fujimura \| R2C \| SPL \| Stillen \| TWM \| Z1 \| ZSpeed \|

03-25-2016, 02:28 PM	#4 (permalink)
Spooler A True Z Fanatic Join Date: Jun 2014 Location: Ga Posts: 13,800 Drives: 2013 Nismo 370z Rep Power: 2684392	Are you going get it completed before Zdayz 2016? bullitt5897 likes this.

03-25-2016, 03:43 PM	#7 (permalink)
cigarclifford A True Z Fanatic Join Date: Apr 2013 Location: Cali State Hospital Posts: 13,351 Drives: 2017 Corvette Z06 Rep Power: 458713	Outstanding Bullitt5897 -Clifford bullitt5897 likes this. __________________ -Clifford

03-25-2016, 03:54 PM	#8 (permalink)
Rusty Ronin Samurai - Assassin Join Date: Dec 2011 Location: Fayettenam,Pennsyltucky Age: 68 Posts: 35,184 Drives: 2011 Nismo GM 6M Rep Power: 2684437	Love to see you make it to ZDAyZ. bullitt5897 and Memphis370Z like this. __________________ 浪人 - 殺し屋 "The Difficult Anytime, The Impossible By Appointment Only" http://www.the370z.com/members-370z-...o-journal.html

03-28-2016, 04:32 PM	#9 (permalink)
bullitt5897 Premium Member Join Date: Jan 2009 Location: North GA Posts: 6,831 Drives: Twin Turbo Z34 Rep Power: 3682	Work has already begun! The APR GTC 500 came off last night. A new Chassis mount wing will take its place. (3 weeks out) The New Differential is in and ready to be installed. The New GTR conversion will come in tomorrow or Wednesday. QTP 3" Cutouts are in. CJM oil Pan is in. ID2000 Injectors are in. NEW EPS 70+mm throttle bodies are on their way. DSS Pro Level Axles are Ordered. (3 weeks left until arrival) Custom Difflow Diffuser awaiting new brackets and install. New Interior work coming soon! Custom Roll cage pending JARblue and SS_Firehawk like this. __________________ *Shop Cars: 2013 318whp Nismo VspecII 370z SOLD, 2009 1000hp+ 93oct 4.0L TT 370z Fast Intentions STAGE 4 #054*

03-28-2016, 04:33 PM	#10 (permalink)
bullitt5897 Premium Member Join Date: Jan 2009 Location: North GA Posts: 6,831 Drives: Twin Turbo Z34 Rep Power: 3682	Fast Intentions Stage 4 kit ships this week!!!! __________________ *Shop Cars: 2013 318whp Nismo VspecII 370z SOLD, 2009 1000hp+ 93oct 4.0L TT 370z Fast Intentions STAGE 4 #054*

03-31-2016, 10:49 AM	#11 (permalink)
bullitt5897 Premium Member Join Date: Jan 2009 Location: North GA Posts: 6,831 Drives: Twin Turbo Z34 Rep Power: 3682	Update: Fast Intentions Kit ships Tomorrow! More Parts Getting installed tonight and tomorrow! Car Goes into the Shop this weekend! RJ Manufacturing intake plenum went in last night! RJ Manufacturing Initial Review __________________ *Shop Cars: 2013 318whp Nismo VspecII 370z SOLD, 2009 1000hp+ 93oct 4.0L TT 370z Fast Intentions STAGE 4 #054*

03-31-2016, 11:49 AM	#14 (permalink)
VQZ34nismo Base Member Join Date: Oct 2013 Location: Miami Beach Posts: 145 Drives: 2010 370z Nismo Rep Power: 12	Looking forward to see this badass build at zdayz Sent from my iPhone using Tapatalk bullitt5897 likes this.

04-04-2016, 09:42 AM	#15 (permalink)
bullitt5897 Premium Member Join Date: Jan 2009 Location: North GA Posts: 6,831 Drives: Twin Turbo Z34 Rep Power: 3682	Update! Dropped the Car off at Forged Performance on Friday. Twin Turbo Kit has shipped from Fast Intentions New DSS Pro Level Axles shipped and should be here tomorrow Masterbeatty likes this. __________________ *Shop Cars: 2013 318whp Nismo VspecII 370z SOLD, 2009 1000hp+ 93oct 4.0L TT 370z Fast Intentions STAGE 4 #054*

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[FOR SALE] Big TT 370Z part out! Pics in profile album "part out"	Cpt. Obvious	Parts for sale (Private Classifieds)	37	01-15-2016 12:52 AM
Project White Dragon Lives! 450zTT 850+ RWHP on 93oct "Dyno Broke"	bullitt5897	Forced Induction	141	04-11-2015 11:06 PM
Anyone here familiar with the "Back of the Dragon"	RonRizz	Mid-Atlantic Region	4	01-23-2015 11:36 PM
MAZOC "Before The Dragon 2013" Gordon Biersch Dinner: Sat Feb 23 @ 7PM, Annapolis, MD	m4a1mustang	MAZOC	715	02-27-2013 01:22 PM
F1 driver "Iron man" Patrese takes his wife for a drive...	WhiskeyHotel	The Lounge (Off Topic)	3	11-21-2011 12:06 PM