The RWB JK build
 

So it has come time to change my z and take it to the next level of its life. In the next year to two years my team and I will be building my 09' 370. A short debrief of whats to come. We will be doing an RWB inspired build via wheel, tire, chassis mount swan neck wing and flair fitment. Currently what it looks like.

**AIMGAIN DIY**

Instagram: RWBjk_z34

http://i100.photobucket.com/albums/m...psolea05vy.jpg

Current modes:

Suspension:
-stance coilovers
-front spl swaybar endlinks
-rear endlinks whiteline
-spc rear camber arms

Engine:
-Z1 ported intake manifold
-AEM CAI
-650 injectors
-255 fuel pump
-UpRev tune 300 whp/ 240 wtq

Interior:
-corbeau bucket seats with 3in 5 point harnesses
-tall track shift knob (brand forgotten)

Exterior:
-Carbon signal front lip

Exhaust:
-moterdyne HFC
-3in high flow cat-less top-speed y pipe
-Tomei single back y back

Mods list for new build + or -:

Part list for the new build (for now):
-rear spats
-"diffuser" will be cut out to raise the exhaust
-aimgain flairs
-custom splitters/ diffuser Front,side and rear
Canards
- chassis mountvBattle Aero 1800mm GT Wing
-Meister M1 3p 19x11 19x14
-Nitto nto5 335/30/19 275/35/19 Running -1 to -1.5 camber

Wow ! Always imagined what an RWB type Z would look like, good luck man. Excited to see some results

thanks for the support ma man!

Looks good so far - more pics!

Change of plans we will be running the AIMGAIN flairs vs moonbeam due to the mass amount wider they are.
Aimgain: R: 70MM F: 50MM

Moonbeam: R:40MM F: 25MM

Decided to run a Gloss black lip and a flat black face S1 or M1 3P, this is an terribly hard decision

http://i100.photobucket.com/albums/m...psv0hdqfsm.png
http://i100.photobucket.com/albums/m...psjv7z8nyc.jpg

Any opinions on what yall like

S1

picking up the The Wheel Fit Tool Determines The Widest Tire And Wheel offset - Online to get the perfect fitment. Its actually a great invention

Tires are in! and a few suspension parts needed to get the specs I am trying to achieve 275/35/19 and 335/30/19 the rear tires are slightly larger in hight compared to the 275. Ive got a feeling the rear will haver a hair more stretch to even that number out. http://i100.photobucket.com/albums/m...psxvpfvnxr.jpg
http://i100.photobucket.com/albums/m...psjktrszmy.jpghttp://i100.photobucket.com/albums/m...psez3lf8l7.jpg

Daaaaaannnnggg

Yessss! I actually did an RWB render with my car! Hope it turns out just like so ;)

https://farm1.staticflickr.com/638/2...8dace62d_b.jpgyup by datsunpride, on Flickr

Did some cutting yesterday, "diffuser" deleted. The main reason for cutting out the diffuser is for exhaust clearance. I will be fabricatimg new brackets to raise the Tomei exhaust for we will be dropping the car slightly. Once the shine auto rear spats go on the rear of the car will appear lower. Making room for a custom diffuser. We also installed some SPL traction/ toe arms.

http://i100.photobucket.com/albums/m...psb8asez3v.jpg
http://i100.photobucket.com/albums/m...psebqjvapi.jpghttp://i100.photobucket.com/albums/m...psz0lpsuuk.jpg

Have been waiting for months just to get a part to work on it! This months most of the parts should arrive. Here is a little update of whats in progress>

Subd!

Being the first to receive the chassis mount wing and being as battle aeros manufacture welded the brackets small we had to do lots of modifications to make this thing fit. Holes had been to short so we slotted and carved longer ovals to accommodate. As well as all the holes had been to small due to powder coating so drilling them all out was yet another step to do.http://i100.photobucket.com/albums/m...ps39wsowy6.jpg

the end hight will be no higher ten the top of the car so drilling new holes lower may need to happen.

Aero jacket rear spats and vortex generators also came in this week http://i100.photobucket.com/albums/m...psutngaosu.jpg

Sweet progress! I actually just got battle aero's chassis mount swan neck wing :) excited to see more!!

Sent from my LG-H900 using Tapatalk

you will have to do allot of fab work to make it fit they made it to small and the holes are a quarter inch to small and all the holes have powder coat so those are to small too. more of an upset via a new company

Mind shooting me a pic? Bolt ons are never bolt ons. I can make it work but I'm curious to see your issue

Sent from my LG-H900 using Tapatalk

will not let me at the moment. i will take a few later but basically the holes on the bracket need to be slotted then dremolled out to smooth the edges so the bolt will move freely. as well as the when you put the two on top in the bottom do get pinched on and slant and are really hard to screw in. disappointed if you as me but its mounted and strong so i guess it worked out.

Well progress continued yesterday with the wing 99% done and the rear spats fitted. The wing looks higher in the picture then in person. http://i100.photobucket.com/albums/m...pszjoeyqas.jpghttp://i100.photobucket.com/albums/m...psezirwwu4.jpghttp://i100.photobucket.com/albums/m...psay64dize.jpg

Looks killer!! Is that the 70in deck?

Nice... cant wait to see it completed.

Had a little shoot the other day by MASIASAhttp://i100.photobucket.com/albums/m...ps4tqng9xj.jpghttp://i100.photobucket.com/albums/m...psfl3flrcv.jpghttp://i100.photobucket.com/albums/m...pszy4z4iae.jpghttp://i100.photobucket.com/albums/m...psjzhs8wmu.jpghttp://i100.photobucket.com/albums/m...ps6xzw94bw.jpghttp://i100.photobucket.com/albums/m...pse8ucumb2.jpghttp://i100.photobucket.com/albums/m...psxxo312gn.jpghttp://i100.photobucket.com/albums/m...psbojzu5jg.jpg

The sticker on the bumper is covering up a pretty gnarly scratch

Look wise, the diffuser delete, wrapped single exit exhaust and that big wing, really make the rear end look raw and all business. Nice!

God I really want a chassis mount wing! That and a real splitter are my first big goals

go threw BATTLE AERO

Do they have the 370z listed yet? Or is their sight just not up to date yet?

yeah they are not updated yet, either just pm them on fb or instagram. should reply instantly

i did have to do some extra work to get it to fit though. Holes had to be notched, all holes needed to be drilled out due to the powder coating

every thing bolt on never fits right....my exhaust being a prime example

im interested in the wing.. how is it when driving?

they made this wing to bolt directly to the 370z crash bar holes yet the holes had been a half an inch to far out. but other then that it was fine

its a little wobbly, you have to X support it and put the support brackets provided to stabilize from going forward and back, but it does well!

I will have to take that into consideration

Sent from my LG-H900 using Tapatalk

So for the first two years of own the z i didnt put my build progress up so i will start from the beginning of its time now

http://i100.photobucket.com/albums/m...pstwjtifwf.jpg

So ill start with my car previous to the z, 2011 Cruze eco manual, i miss that gas milage;)

tuner galleria 2016 chicago was a success

http://i100.photobucket.com/albums/m...psvbbyrhcj.jpg

http://i100.photobucket.com/albums/m...pshd0yiscr.jpg