Birdman's Build

birdman71

Thanks brotha!
I'm happy with the way she is turning out too. I have an idea of what I am doing for the entire build now as well.
I am going to probably do the Rowen kit (front and back bumpers and sideskirts with blades) and I'm going to have Bulletproof send it off for paint more than likely as well.
Going to keep my Rae Blue color code and oem paint, will have rock chips fixed on oem paint as well. Rock chip fixes and new paint is going to be color corrected and then the whole car will get ceramic coated to protect the paint. I'm going to keep my hood and fenders most likely and paint them as well, same process. Probably going to go with the Varis CF Hyper Narrow GT wing.

Possibly have a hookup to a photo-shoot with Stance Nation soon too, if it comes through, interested in doing some duo shots? It'd be local places. Sadly will be before I get all those parts above before the photo-shoot, but that is my goal right now.

__________________

Birdman's Build:
Powerhouse Amuse/ Nismo/ Eibach/ ACT/ Tommy Kaira/ Avant Garde/ Fast Intentions/ Project Kics/ Fly 1 Motorsports/ EVO-R/ Z1 Motorsports/ Weber Sports/ Zoom/ Zele Japan

birdman71

Just some more pictures before I actually install the shift knob, looking to get to it later today









More to Come after its been installed!

__________________

Birdman's Build:
Powerhouse Amuse/ Nismo/ Eibach/ ACT/ Tommy Kaira/ Avant Garde/ Fast Intentions/ Project Kics/ Fly 1 Motorsports/ EVO-R/ Z1 Motorsports/ Weber Sports/ Zoom/ Zele Japan

FairladyZ40th

Awe wtf!? Seriously I can't down shift? D: what's the point of having a manual??

FairladyZ40th

You butt! I want mine to come in soooo badly! D: maybe I should start a build thread XD


Sent from my iPhone using Tapatalk

birdman71

You can downshift, but the added stress on the clutch will make it wear A LOT MORE...

I'm sure haha! you shoulda a long time ago lol

__________________

Birdman's Build:
Powerhouse Amuse/ Nismo/ Eibach/ ACT/ Tommy Kaira/ Avant Garde/ Fast Intentions/ Project Kics/ Fly 1 Motorsports/ EVO-R/ Z1 Motorsports/ Weber Sports/ Zoom/ Zele Japan

FairladyZ40th

Woo! Guess what just came in the mail hehe brand new ACT clutch and flywheel combo yeee buddy


Sent from my iPhone using Tapatalk

TerribleONE

I don't think downshifting with proper rev matching will wear the clutch that much. Never had a problem doing it in any of my cars.

__________________

FairladyZ40th

Do you have HIS exact set up?


Sent from my iPhone using Tapatalk

TerribleONE

No I am running the Specialty Z high 5 clutch but I don't see why a ACT clutch cant be downshifted. If you are rev matching properly there shouldn't be that much stress put on the clutch.

__________________

FairladyZ40th

Maybe it's how rigid the pressure plate is? If I remember correctly the pressure plate Mr. Bird got is one level below ACTs strongest/stiff plates. Idk anything about specialty Zs products unfortunately but I am willing to bet that they could be a little different I. Comparison? Just a thought though...


Sent from my iPhone using Tapatalk

TerribleONE

Yea I am sure they are different but at the end of the day a clutch is a clutch and I don't think down shifting with proper rev matching causes excessive wear. I am sure it causes some, but don't think it would cause the clutch to fail prematurely.

__________________

birdman71

Lmao, both of you are kind of right. Allow me to explain.

This is the clutch I currently have installed that has slipped:
NZ2-XTSS // Advanced Clutch Technology

As you can tell the clutch disc has a small opening for a moderate to heavy pedal effort. This feel was EXTREMELY STIFF when first installed. This made me pretty much relearn how to drive this car which probably damaged the clutch a bit. The new clutch I'm getting has a much more open face of the clutch disc.

Here is where it went wrong:
At the time with installing of the clutch and pressure plate and ACT flywheel, I also installed the Z1 CSC elim kit, which when not adjusted correctly or every couple thousand miles, the tuning fork and throw-out bearing in the clutch system will constantly wear on the clutch causing it to slip.

That is not the main issue, but provides more than normal wear over time. The main issue is that there have been many times I have had to High Rev Downshift where the added stress on the clutch is immense. A lot of times downshifting back into the 5-6k rpm range. Usually due to other drivers around me and traffic. There have been a couple times I can count on one hand that I have burnt up the clutch. Of course I always thought "Why? if my foot is all the way off the clutch" but I figured after hearing about the fork and throw-out bearing it made more sense.

It also doesn't help doing spirited drives through GMR every month as well. Lots of shifting and lots of high rev downshifts after coming out of a turn and going into the next.


So a combination of High Rev Downshifts, fork and bearing wear and having to almost launch when in 1st has made for the Clutch Slip.

This is why my recommendations were:
#1: If you want ANY clutch to last the longest, but especially this one, don't down shift unless you are downshifting only up to 3500 rpm or so. The added stress on the clutch is normal at that point.
#2 : This was more of a joke, although if you think about the cost of a clutch compared to brake pads it is cheaper to buy brake pads while not downshifting to save clutch life.


Since Mig (fairladyz40th) went with the same clutch system I did as I linked above minus the Z1 csc kit, I was just letting him know not to high rev downshift and don't be a dumbass like me and wear out his clutch in 4 months like I did. Otherwise itll be another $1k outa pocket... again like me... :shakeshead: Heck right now I CANNOT get my revs above 3200, otherwise the clutch slips and shoots the revs. It also takes me close to 20 seconds to get going 35mph from a deadstop


After doing more research on the types and differences in the clutch plate, plus researching about the stock pedal vrs rjm v3.1 pedal I went with a new clutch and the rjm v3.1 pedal as well. The stock pedal will cause wear on an aftermarket clutch too.

__________________

Birdman's Build:
Powerhouse Amuse/ Nismo/ Eibach/ ACT/ Tommy Kaira/ Avant Garde/ Fast Intentions/ Project Kics/ Fly 1 Motorsports/ EVO-R/ Z1 Motorsports/ Weber Sports/ Zoom/ Zele Japan

birdman71

New purchases due to some clutch issues and research done:

Went with a new clutch and pressure plate since mine is currently slipping (as explained in last post haha) It is the Advanced Clutch Technologies ND2-HDSS. Also have paired it with the RJM Performance V3.1 Clutch pedal Assembly

__________________

Birdman's Build:
Powerhouse Amuse/ Nismo/ Eibach/ ACT/ Tommy Kaira/ Avant Garde/ Fast Intentions/ Project Kics/ Fly 1 Motorsports/ EVO-R/ Z1 Motorsports/ Weber Sports/ Zoom/ Zele Japan

birdman71

UPDATE

Have been talking with Fly 1 Motorsports about a Sponsorship for my Z and will be finalizing everything with Lohit in the next couple of days for the Promo Photoshoot with the Weber Sports Body Kit!
The Z will be out of commission for a while with parts, paint and labor being done.

__________________

Birdman's Build:
Powerhouse Amuse/ Nismo/ Eibach/ ACT/ Tommy Kaira/ Avant Garde/ Fast Intentions/ Project Kics/ Fly 1 Motorsports/ EVO-R/ Z1 Motorsports/ Weber Sports/ Zoom/ Zele Japan

zefaulter

Damn she's gonna look amazing