Should have had a v8

Rusty · 10-04-2017, 08:56 PM

Good job!

I did a DIY thread on the APR long studs awhile back.

JIN2012 · 01-24-2018, 04:20 PM

Quote:

Originally Posted by Cell

What sucks about our cars is that when water runs down the front windshield and onto where the panels meet the edge of the windshield, it seeps down and through the back of the battery area and into the bottom. That is where you see the rust and mineral build up in that photo. So if the Z was driven in the winter, chances are you will find the same build up in that spot.

This is also the same reason why using the grommet where all the wires enter the cabin as a way to hook up gauges are a bad idea. The grommet will be worthless and leak water into the cabin unless it is sealed off again with some sort of sealant.

I lost an ECU from water coming down through a cut I made to the grommet after a nitrous kit install on my previous HR . I should have applied some rubber sealant

blak max · 03-03-2018, 09:28 PM

Some much need updates

Did Znats last oct

do as i say not as i do

how to make the rental trailer low friendly

when you dont know your own strength

even won an award !

spot the new decal ..and showing at the wpb convention center

some more work. changed out the walbro, reajusted the endlinks

car show today

blak max · 05-21-2018, 02:52 AM

hey new look unvail at Zdayz

JARblue · 05-21-2018, 09:13 AM

Saw the car. Phenomenal work all around

Sad that I didn't get to say hi.

blak max · 05-21-2018, 04:55 PM

Quote:

Originally Posted by JARblue

Saw the car. Phenomenal work all around

Sad that I didn't get to say hi.

thanks ! always a work in progress... i was all over the place . saw people i wanted to talk to and a second later they were gone

blak max · 05-21-2018, 04:58 PM

blak max · 05-22-2018, 04:21 PM

Orestp · 05-25-2018, 03:43 PM

Hey - amazing project - Congrats!

I looked through the thread but couldn't find what transmission you used.

Was it a 6L80 automatic?

blak max · 05-25-2018, 08:28 PM

Quote:

Originally Posted by Orestp

Hey - amazing project - Congrats!

I looked through the thread but couldn't find what transmission you used.

Was it a 6L80 automatic?

Hey thanks.. used a 6l80. I wanted it bc it was one of the newer and I wanted paddle shifting. With more research I could have gone with an upgraded 4l80.

blak max · 05-31-2018, 05:09 PM

Throwback Thursday !!! I dont think ive shown the beginning pics before. The birth of this idea came at Zdayz one year. bought the car online from a different state. It came with everything but an engine block.

gbrettin · 06-08-2018, 12:29 PM

That looked like a nightmare before.

Sent from my SM-G930P using Tapatalk

blak max · 06-08-2018, 02:12 PM

Quote:

Originally Posted by gbrettin

That looked like a nightmare before.

Sent from my SM-G930P using Tapatalk

Yes it did ! But motivation with the vision and taking things one step at a time , got things done ✅

blak max · 09-22-2018, 05:33 PM

STP370z · 10-21-2018, 04:00 AM

Im debating between a SC build or a 4.8 vortec swap. Reading this thread made that decision so much harder

10-04-2017, 08:56 PM	#301 (permalink)
Rusty Ronin Samurai - Assassin Join Date: Dec 2011 Location: Fayettenam,Pennsyltucky Age: 68 Posts: 35,180 Drives: 2011 Nismo GM 6M Rep Power: 2684437	Good job! I did a DIY thread on the APR long studs awhile back. blak max likes this. __________________ 浪人 - 殺し屋 "The Difficult Anytime, The Impossible By Appointment Only" http://www.the370z.com/members-370z-...o-journal.html

03-03-2018, 09:28 PM	#303 (permalink)
blak max Enthusiast Member Join Date: Apr 2014 Location: CFL Posts: 476 Drives: Ls swapped 370z Rep Power: 3369	Some much need updates Did Znats last oct do as i say not as i do how to make the rental trailer low friendly when you dont know your own strength even won an award ! spot the new decal ..and showing at the wpb convention center some more work. changed out the walbro, reajusted the endlinks car show today Zerafian, JARblue, Rusty and 4 others like this. __________________ LS 370Z ~ Fueled Racing ~ CSF radiator ~ Vis Racing ~ Braum Racing ~ SPLparts~ Vossen~Odessey Battery

05-21-2018, 02:52 AM	#304 (permalink)
blak max Enthusiast Member Join Date: Apr 2014 Location: CFL Posts: 476 Drives: Ls swapped 370z Rep Power: 3369	hey new look unvail at Zdayz Zerafian, God-Speed, JARblue and 7 others like this. __________________ LS 370Z ~ Fueled Racing ~ CSF radiator ~ Vis Racing ~ Braum Racing ~ SPLparts~ Vossen~Odessey Battery

05-21-2018, 09:13 AM	#305 (permalink)
JARblue A True Z Fanatic Join Date: Mar 2011 Location: Austin, TX Age: 43 Posts: 36,450 Drives: 11 Z34, 98 E36 M3 Rep Power: 2684440	Saw the car. Phenomenal work all around Sad that I didn't get to say hi. __________________ 2011 370Z 6MT Sport Gun Metallic \| ARC \| CJM \| Ecutek \| FI \| Fujimura \| R2C \| SPL \| Stillen \| TWM \| Z1 \| ZSpeed \|

05-21-2018, 04:58 PM	#307 (permalink)
blak max Enthusiast Member Join Date: Apr 2014 Location: CFL Posts: 476 Drives: Ls swapped 370z Rep Power: 3369	cv129 and Zbrah like this. __________________ LS 370Z ~ Fueled Racing ~ CSF radiator ~ Vis Racing ~ Braum Racing ~ SPLparts~ Vossen~Odessey Battery

05-22-2018, 04:21 PM	#308 (permalink)
blak max Enthusiast Member Join Date: Apr 2014 Location: CFL Posts: 476 Drives: Ls swapped 370z Rep Power: 3369	gbrettin, Zbrah, carlitos_370z and 3 others like this. __________________ LS 370Z ~ Fueled Racing ~ CSF radiator ~ Vis Racing ~ Braum Racing ~ SPLparts~ Vossen~Odessey Battery

05-25-2018, 03:43 PM	#309 (permalink)
Orestp Base Member Join Date: Jul 2011 Location: Edmonton, Alberta Posts: 43 Drives: 2010 370Z Rep Power: 14	What transmission did you use? Hey - amazing project - Congrats! I looked through the thread but couldn't find what transmission you used. Was it a 6L80 automatic? __________________ GTM Twin Supercharger / GTM Large Capacity Oil Pan / GTM Valve Body Upgrade / Setrab 34 row oil cooler <- Deleted, Replaced with Laminova water to oil oil cooler / MotorDyne ART pipes / Cusco RS LSD / Tuned by Specialty Z / 15mm Ichiba spacers front & rear

05-31-2018, 05:09 PM	#311 (permalink)
blak max Enthusiast Member Join Date: Apr 2014 Location: CFL Posts: 476 Drives: Ls swapped 370z Rep Power: 3369	Throwback Thursday !!! I dont think ive shown the beginning pics before. The birth of this idea came at Zdayz one year. bought the car online from a different state. It came with everything but an engine block. Rusty, Hotrodz, jchammond and 2 others like this. __________________ LS 370Z ~ Fueled Racing ~ CSF radiator ~ Vis Racing ~ Braum Racing ~ SPLparts~ Vossen~Odessey Battery

06-08-2018, 12:29 PM	#312 (permalink)
gbrettin A True Z Fanatic Join Date: Oct 2010 Location: Portage, MI Posts: 2,281 Drives: Tricycle Rep Power: 589151	That looked like a nightmare before. Sent from my SM-G930P using Tapatalk blak max likes this.

09-22-2018, 05:33 PM	#314 (permalink)
blak max Enthusiast Member Join Date: Apr 2014 Location: CFL Posts: 476 Drives: Ls swapped 370z Rep Power: 3369	Hotrodz, Zbrah, Memphis370Z and 1 others like this. __________________ LS 370Z ~ Fueled Racing ~ CSF radiator ~ Vis Racing ~ Braum Racing ~ SPLparts~ Vossen~Odessey Battery

10-21-2018, 04:00 AM	#315 (permalink)
STP370z Base Member Join Date: Jun 2017 Location: FL Posts: 146 Drives: '14 370z Touring Rep Power: 8	Im debating between a SC build or a 4.8 vortec swap. Reading this thread made that decision so much harder blak max likes this.