S.O.S. - Signaled Out Sedan

tonyHTX

Learning to camera with Meagan Lee Bryan

DSC01255 by ttv36, on Flickr

DSC01223 by ttv36, on Flickr

DSC01246 by ttv36, on Flickr

DSC01229 by ttv36, on Flickr

__________________
2007 G37S [VQ37HR] Sedan 6MT - Fast Intentions Stage 3 TT - @ttv36 #tptoons

jwick

Got a little nippy yesterday for wearing so little.

Nice shots bro!

__________________
'10 G37T 6MT Graphite/Graphite - BP - G37T Build

tonyHTX

Hope everyone had a Merry Christmas!

My axles finally came and went in at Jtran last week:



I got a pair of Gramlight 57xtreme 18x10.5 +40 rear wheels a few weeks ago for a steal and mounted 295/35/18 Nitto NT05s on them as these will be for my track/drag days:





I'm going to need to get a matching pair for the front now, but for my immediate quarter mile goals just the rear should be fine.

I've never done a burnout in this car before and didn't want to be a complete noob at the drag strip and stall so I had to practice hooning of course:


Lastly, I have been trying to learn how to use my camera and edit more. My brother and I took our cars to take pictures the day after Christmas:
DSC02301 by ttv36, on Flickr

DSC02276 by ttv36, on Flickr

I think this is probably my best attempt yet:
DSC02318 by ttv36, on Flickr

Edit: Many have asked how the cars stack up, here is some Mexico highway fun. (Note: Watch the RPM go to redline)


Hope everyone has a great holiday!

__________________
2007 G37S [VQ37HR] Sedan 6MT - Fast Intentions Stage 3 TT - @ttv36 #tptoons

tonyHTX

My first ever attempt at light painting.

DSC03577 by ttv36, on Flickr

__________________
2007 G37S [VQ37HR] Sedan 6MT - Fast Intentions Stage 3 TT - @ttv36 #tptoons

tonyHTX

Been a minute.

__________________
2007 G37S [VQ37HR] Sedan 6MT - Fast Intentions Stage 3 TT - @ttv36 #tptoons

tonyHTX

2019! Let's see if I can update this to match MyG37

8/2/2016:
Car still isn't running as it should since the clutch has been slipping since March but I couldn't resist the itch. Have been waiting on maintenance parts and should have them soon..



9/5/2016:
A lap from this past weekend's track day at MSR Houston.



I ended the weekend at MSR with some yard work:



Apparently a Carbon Signal lip is not good for mowing the lawn..


9/20/2016:
Alright, I guess it's time I stop being lazy and actually update the thread. Life has taken a higher priority so car activities (and funds) have gone down quite dramatically this year.

I will begin with the DSS driveshaft - the car seemed to drive fine after installing the driveshaft but when I got up to 90 mph there was an annoying vibration which only got worse as speed increased. By 120mph the car felt like it was going to wobble itself sideways. After removing the driveshaft there were plenty of gouges on one side which meant it was either not true (straight) or it was unbalanced. Sorry, I have since gotten a new phone and I don't have access to my backup pictures right now to show the gouges as they are on my desktop, in a box, in a storage unit. :52:

After putting the stock driveshaft back on, the one piece was sent to back to DSS for them to check it and/or rebalance. DSS had turned the driveshaft around pretty quick, but I figured I would hold off on opening the box and installing it until I got my new clutch...

You see, my Southbend Stage 3 Drag had began to slip after a few months at 713whp/680wtq. So, around the time I sent the driveshaft back to DSS (March) I had placed an order with a local 'business' named Jester's Toybox for an OS Giken Triple plate.

After months of BS / broken promises June rolls around and, long story short, I got screwed over by said 'business' and ended up filing a PayPal dispute to get my funds back.

PSA: DO NOT DO BUSINESS WITH Jester's Toybox

I guess the name should've been forewarning enough, but he was local and seemed like a 'good' guy so I thought of giving him the business.

Ron, the mad scientist/engine builder/mechanic, was able to promptly get me a Clutchmasters FX850 Twin Disk and we began the install these pending things:





Just checking the width of the driveshaft that was refinished/rebalanced and sent back to me.


Oh, I forgot to mention that along with the slipping clutch my CSF radiator had started leaking.



CSF was amazing and sent a new one to us, they have gone above and beyond what I would've expected from them!



After getting everything buttoned up, I went on a test drive to see if the driveshaft was fixed. Unfortunately it was not and when we removed it it had completely new gouges! I'm sorry I don't seem to have taken a picture of them again (fail!). My assumption is that the driveshaft is still not straight, we are in contact with DSS and trying to get a Carbon Fiber replacement. In the mean time the stock driveshaft, which I have since named 'Old Faithful', is back in. :dunno:

Which leads to the last few posts where I took it back to MSR Houston to learn how to drive it faster!


And ended up with the lawn mowing posted above.


Giving me the title "King of the Broken Lips"


It has finally pushed me to repaint my bumper which I have been putting off for almost a year.


That's pretty much it for now, hopefully the next update won't take 6 months! :icon30:

9/22/2016:
Suburbia Cruising


Coming back to form..


9/24/2016:


Fresh detail by my good friend for #wekfestprep





12/9/2016:
Lack of updates here lately, but life and holidays has taken over. Unfortunately the head lifted on the motor back in September/October and the car has been sitting in storage ever since. Won't get around to fixing it until Spring at the soonest, but I'm still on the fence as to which route to go for the fix.. At least there is a good quarter of a year to think about the options at hand.

1/3/2017
I was able to drive the car over the holidays and the head was still lifting after 4-5 pulls at 21psi. I only had a few hours to spend with the car so I loaded up the Uprev ROM Editor, dropped the boost controller to 16psi, took some timing out, and fixed the AFRs. The car stopped pushing coolant and appears to run just fine. :dance:

The main reason I took the car out was to get a festive picture for the holidays; it didn't come out quite as well as I had envisioned since there was traffic, but it was decent enough.



I should have some more time at the end of this month, but I think the plan will be to learn more about Uprev tuning and street tune the car on 93 since I am only running 16psi now. Once that is done it will likely stay untouched while I develop the plan (and funds) for the next stage. :icon30:

3/13/17:
^ Thanks! I'm sure Mike's car will be insane once he gets a full tune!

I had grand ideas for the car at the end of '16 but the reality of '17 seems to be punting those further down the roadmap.. I did manage to change the oil when I first got it back:


I have been messing with the car's tune and found that 18-19psi seems to be the threshold where the headlift occurs and coolant starts to push.

Since I no longer can run high boost levels I decided to switch back to 93 and start a new tune at 14psi. It's been fun learning how to tune the car myself and I am looking forward to getting it to a point where I can put it on the dyno to make some power runs - mainly to see if I'm "doing it right" :icon30:

I did find some old unedited pictures when I setup my computer in the new house and have slowly started editing them:



3/28/2017:
^ Oh you kids and your toys!




5/9/17:
Currently hanging around..


5/18/17:
Finally on the ground after weeks (months?) in the air because I've been too lazy to finish the maintenance. Maybe I'll actually drive her this weekend after I charge the battery.







5/31/2017:
After the head lift last fall I have been preparing to rebuild; I guess every great story eventually has a reboot?

The motor started knocking recently so I think time is running out, it's too bad it is on it's last leg but considering how I drive the car it's held up quite well. Overall the smiles per hour over the past 2+ years have made everything worth it and I've learned a lot about our platform.

Fortunately some pieces of the puzzle came in yesterday.


I have acquired a few smaller pieces in preparation but haven't taken pictures of them:
Z1 Solid Motor Mounts
ATI Super Damper
ID1300 Injectors
CJM VQ37VHR Fuel Rails
VQ37VHR Crankshaft
Synolimit Ported Upper and Lower VQ37VHR Intake Manifolds
Synolimit 63mm Ported TBs (s/o to Upscale Speed)

Hopefully I can get everything else that I want/"need" in the next few months and be the first ever 2007 G37 Sedan VQ37HRTT?

7/25/17:
The inventory of parts is near complete, the reboot should start sometime around October unless I decide to get a couple last items which could push things to around December.. What's another month or two right? :dunno:

RJ Manufacturing Closed Deck Block
VQ37 Crankshaft
Carillo VQ37 H Beam Rods w/CARR bolts
CJM VQ37 Fuel Rails
ID1300 Injectors
Tomei ProCam 272 10.8 IN/EX
Tomei Valve Springs
Tomei Titanium Retainers
Cosworth HR/VHR Head Gaskets
ARP 625+ Head Studs
ATI Super Damper
EPS Oil Gallery Gaskets
Z1 Solid Motor Mounts
Synolimit Ported VQ37 Upper/Lower Intake Manifold
Synolimit Ported Throttle Bodies (s/o to Upscale Speed)
BW/AAM High Pressure Wastegate Actuators
AdminTuning Combo Tank

Rods


Head Gaskets


In the meantime I'm still puttin the car around @ just 14psi


7/28/17:
RJ Manufacturing Closed Deck is in, will probably start building this outside the car and do the swap sometime later this year.




9/19/17:
With Harvey having such a huge blow to Houston there are so many things that the city has to deal with. Thankfully my family and I were blessed enough to make it through the storm fairly unscathed. A roof leak sprouted in our home, but it is so minor and insignificant compared to what my neighbors and community have gone through that it doesn't even register on the scale.

Things have slowly started to go back to normalcy the past two weeks and reevaluation had to be done as far as the car rebuild is concerned. I originally wanted to wait a few months to upgrade the turbos, but with a property tax hike looming that is just not in the cards anymore.

That means this is one of the final pieces of the puzzle - a Suckerpunch Motorsports Oil Pump! This combined with the Tomei cams and ATI Super Damper should allow me to safely raise the redline to 8500rpm and possibly even 9000rpm (if we are daring enough to try).



The only thing I'm waiting on now is for a new set of custom pistons which have been ordered and should be 3-4 weeks out, after which the rebuild will begin. :JAMIN:

9/25/2017:
As I've mentioned before I started tuning my car on Uprev by myself since the head lifted back in November and now that I am getting close to the rebuild I wanted to get the car on the dyno to get some numbers for the tune. A friend recently had his car retuned at DD Performance Research which has a 4wd dynojet. I originally intended to hit up both DD and Kozmic on the same day to have comparisons between DD's dynojet and Kozmic's mustang dyno, but another friend went ahead and put his car on DD's dyno first as he originally had his car tuned at Kozmic. His car made 380whp on Kozmic's mustang dyno and 382whp on DD's dynojet. Seeing as how there was only a whopping 2whp difference between the two dynos I decided to not even have my car run at Kozmic.

Here are the results for my self tune on 93 at 14.5psi:


Smoothing 5 applied:


The tune needs a little more work, but at this point I'm calling it good as I will start a new tune from scratch once the new motor is put in. I'm pretty stoked that my tune was pretty much able to match the numbers that the car previously made on 93 and Jtran's tune. :JAMIN:

__________________
2007 G37S [VQ37HR] Sedan 6MT - Fast Intentions Stage 3 TT - @ttv36 #tptoons

tonyHTX

11/9/2017:
Custom 10:1 pistons have arrived! The previous Main Engineer for Arias pistons formed his own company - Traum Optimum Performance - and took our specs from the 3.7 crank/rods and made us these pieces of art. The closed deck block is going to be sent out for bore and hone at the end of the month and assembly of the new bottom end should start in December. If everything goes well the new heart will be transplanted in January 2018 and the (first?) 2007 G37 will come into existance. :BOUNCE:





1/8/2018:
First week of 2018 has started rolling, here are a few updates of where version 2 of the build is.

Closed deck block came back from the machine shop after bore & hone


Measured for bearings


Tested piston height


Obtained a used Fast Intentions TT kit to put on the car - order has been placed for Xona Rotor 65.64 (Stage 3) Turbskies and a few misc parts


Here's to a more active 2018 after a year or so 'off' of prep! I wonder if we will be able to make it in time for TX2K.. :JAMIN:

2/23/2018:
A little behind estimated timeframe, but I finally received the rest of the parts needed for Version 2.0 of the build. Motor should be dropping next week, no solid ETA on when everything will be reassembled yet but things will finally be moving. :biggthumpup:



Stage 3 - HTZ-3579 (Xona Rotor 65.64)


S/O to Kevin @ Fast Intentions for the remaining pieces, he even threw in a license plate frame! :icon30:


Version 2.0:
Fast Intentions Twin Turbo Kit
Xona Rotor 65.64 (HTZ-3579) Turbos
TiAL MV-S Wastegate Springs 14.5psi/1bar (Black/Red)
RJ Manufacturing Closed Deck Block
Carillo VQ37 H Beam Rods w/CARR bolts
Traum Pistons Custom Billet 10:1 cr
VQ37 Crankshaft
CJM Twin Pump upgraded to 255/450
CJM VQ37 Fuel Rails
ID1700 Injectors
Tomei ProCam 272 duration 10.8 lift IN/EX
Tomei Valve Springs
Tomei Titanium Retainers
Cosworth HR/VHR Head Gaskets
ARP 625+ Head Studs
SuckerPunch Motorsports Billet HR/VHR Oil Pump with Billet Gears and Billet Back Plate
ATI Super Damper
EPS Oil Gallery Gaskets
Z1 Solid Motor Mounts
Synolimit Ported VQ37 Upper/Lower Intake Manifold
Synolimit Ported Throttle Bodies
AdminTuning Combo Tank

2/28/2018:
The beast was dropped off this past weekend into the mad scientist's domain. Now the wait begins. :BOUNCE:



3/21/2018:
Teardown of the old setup is pretty much complete. The AAM TT was bagged, tagged, and shipped to it's new owner. Hopefully he enjoys many smiles per hour with it as well!



As expected, the old block suffered headgasket failure due to combustion.


Some scarring of the cylinder walls.


The heads will be stripped and sent out for a refresh, then reassembly will start. :JAMIN:

11/27/2018:
Here's some 10:1 compression for you



Fast Intentions Stage 3 Xona XR 65•64


4/16/2019:
I can't believe this thread is over 5 years old now! My where has the time gone..

The build that keeps on going is still not done, but we inch towards completion every other month or so.

Well let's sum up what's happened in the past 5 months. :9:


November 2018:
-----------------------
The main goal was to get the motor assembled and sealed up.

Heads, plugs, etc


Dynosty Head Gaskets


Just a "VQ35"


CJM VQ37 FPD Rails, Synolimit Ported VHR Lower Intake Manifold


Synolimit Ported VHR Upper Intake Manifold & 63mm Ported TBs


Suckerpunch Motorsports Oil Pump, EPS Oil Gallery Gaskets, Greddy Oil Pan, Fast Intentions Oil Filter Relocation


Sold the my 19" RE30s and got another pair of 18s to step down on all corners. I couldn't find winning blue to match the rear so I'll have to fix the color issue.. :confused2:

Gram Lights 57xtreme 275/35/18x9.5 +22f and 295/40/18x10.5 +40r


Hangry



December 2018:
-----------------------
Christmas Roadtrip!




January 2019:
-------------------
Just keeps going and going...

ATI Super Damper


Fast Intentions Stage 3 - Xonarotor XR 65•64



Backside clearance over that "VQ35"



February 2019:
---------------------
Finished all the lines and "mocked" up the pipes :28:





March 2019:
-----------------
Finally we can chuck this.. Omgwtfbbq!

We need clean up the years of neglect and cobwebs... :banghead:




Hand "Car Wash" :icon30:


"RB" Swap


Movement thanks to 2 MFP (Men Foot Power)


Fast Intentions Steering Rack Spacers - the detail to the design of their kit is amazing!


I guess you can say we dropped the car onto the motor instead of "dropped the motor in" :5091:


Home is where the heart lies :JAMIN:


I love the Fast Intentions manifold, look how much clearance there is with these big ol turbskies (they are equivalent to GT35Rs)
My AAM TT kit did not have this good of clearance and it had smaller turbos :confused2:




April 2019:
---------------
That's where we stand.. April's update will come after us fools get back to the garage.. :icon11:

But, the actual car was taking too long to rebuild so I decided to build a car simulator to get my seat time in instead.

__________________
2007 G37S [VQ37HR] Sedan 6MT - Fast Intentions Stage 3 TT - @ttv36 #tptoons

tonyHTX

#tbt I can not wait to hear what the new cammed motor sounds like!

__________________
2007 G37S [VQ37HR] Sedan 6MT - Fast Intentions Stage 3 TT - @ttv36 #tptoons

jwick

That’s a ton of work and time. Hopefully she’ll be alive soon

__________________
'10 G37T 6MT Graphite/Graphite - BP - G37T Build

Spooler

What head studs did you use in your old motor? Nevermind, I see they were Cosworth head studs.
Looking at the TT kit you used and the Turbo's your drive pressure got way out of whack causing
excessive back pressure. This will increase the cylinder pressure and bye-bye headgaskets. That is
why you couldn't make over 21psi of boost. You got way out of your efficiency area.

tonyHTX

Time is flying by so fast I don't even know where it's gone! I guess I'll just start summarizing through the months of the project at this point.

May 2019:
It's been a minute since I got the wheels, but black and blue mismatched wheels was not making me want to look at the car very much.


JACE Auto took care of the problem for me:


Now the looks:



June 2019:
Last time we were in the garage we got the motor in, next up as the clutch/transmission:



FI Crash bar fits, but the tow hook is a couple inches high - that's ok if you cut the grille out.


July 2019:
Found some more time so we started hooking up the bay:



A piece of Lt8Che Black Pearl will live on here:


July 2019:
Time is sparse - some more things have been installed. We need to finish the new intake pipes as well.

Man I wasn't really thinking through the color of the admin tank.. Going to have to hit up that powdercoater again. :52:

__________________
2007 G37S [VQ37HR] Sedan 6MT - Fast Intentions Stage 3 TT - @ttv36 #tptoons

sirnixalot

I feel embarrassed that I am just discovering your build.

Awesome awesome work. Interested to see how the Clutchmasters holds up as I may have to go that route when the OS Giken I have gives up the ghost

__________________
2010 Sport - LS3 swap loading
2012 Frontier - BTWTuning VK56DE swap

tonyHTX

Well I post sparsely these days so and it's not a Z so it's understandable. I've been trying to slowly come back and post more though!

__________________
2007 G37S [VQ37HR] Sedan 6MT - Fast Intentions Stage 3 TT - @ttv36 #tptoons

YzGyz

Dang Master Wrench Ron has some tools!!


OMG!! you got oil on his garage floor!!!! He must of been pissed.

Your car is so close to the "finish line" my friend..

YzGyz

__________________
http://www.the370z.com/members-370z-...gyzs-turn.html

YzGyz

gbrettin

Wow, hell of a build! very impressed.