S.O.S. - Signaled Out Sedan

tonyHTX · 07-03-2015, 05:56 PM

Happy 4th weekend everyone, JDMurica!

tonyHTX · 08-05-2015, 06:28 PM

In the past few weeks my Southbend Stage 3 Endurance clutch had started slipping in the higher gears. I called Southbend and I was told that the clutch should hold around 480 torque... At the flywheel! I'm at 525 wheel torque so it slipping is kind of to be expected, it did hold pretty well the last 4+ months though. On top of that my transmission, which has 94k miles, has started grinding in 5th gear and 6th gear. This isn't a total surprise considering how much power the car puts out now, but it wasn't an issue that I was anticipating to happen. I called a local salvage yard to get a used transmission and they delivered it within a few hours!

But, that means my car will be going back to the shop very soon. Luckily, I have obtained most of the parts for my next phase:

Special thanks to phunk for the first ever CJM Stage 3 Fuel Return System for HR motors, as well as the picture!

Since this is happening sooner than I was planning there are two things that I wanted to get but I just can't afford them when the transmission is thrown into the mix. I guess those will have to wait until next year or so, hopefully this is enough to tide me over until then!

tonyHTX · 08-09-2015, 05:21 PM

To Infiniti..

tonyHTX · 09-05-2015, 03:03 AM

My first time ever to the drag strip tonight. My best time for the night was:

I think that run was 12.7, I need to learn how to launch better without spinning first and second. I'm sure better tires and/or drag radials would help.

Edit: Inside my very first run. I didn't even know where to line up hah

AV8rZ · 09-05-2015, 10:28 AM

Your car is BA!

tonyHTX · 09-08-2015, 01:24 PM

Here is another video from the inside where I got toasted by a bad arse truck on drag radials. He ran a 12.5 and I ran a 12.6. To add insult to injury my passenger got kicked out! Hopefully I can learn how to launch the car properly at the strip.

jaytirbhaw · 09-08-2015, 01:39 PM

sick car and build man

tonyHTX · 09-24-2015, 03:38 PM

Finished the switch to corn - special thanks to phunk / CJM for the (first?) Stage 3 RFS for a V36 sedan!

We stopped here for today, hopefully I will have time to write up more details this weekend:

GaleForce · 09-24-2015, 11:37 PM

Holy Sh*t!!!!

Tony, why didn;t you message that to me?

Beast mode engaged!

GaleForce · 09-24-2015, 11:38 PM

Damn! That torque!

jwick · 09-24-2015, 11:39 PM

That is definitely a monster of a build. Think I'll go watch him at the grag strip tomorrow

GaleForce · 09-24-2015, 11:42 PM

Quote:

Originally Posted by jwick

That is definitely a monster of a build. Think I'll go watch him at the grag strip tomorrow

Time for slicks.

jwick · 09-24-2015, 11:45 PM

Quote:

Originally Posted by GaleForce

Time for slicks.

For him. I'm afraid to take the G to the strip.

YzGyz · 09-25-2015, 01:54 AM

I'm going out to Royal tomorrow. I'm meeting a boosted stang out there. Hope Tony and you come out.

YzGyz

Lt8Che · 09-25-2015, 09:53 AM

In for results, if I was closer I'd come out. Be safe and have fun!

07-03-2015, 05:56 PM	#46 (permalink)
tonyHTX Enthusiast Member Join Date: Feb 2014 Location: Houston Posts: 254 Drives: Race, Repair, Repeat Rep Power: 4638	Happy 4th weekend everyone, JDMurica! jwick, GaleForce and Hotrodz like this. __________________ 2007 G37S [VQ37HR] Sedan 6MT - Fast Intentions Stage 3 TT - @ttv36 #tptoons

08-05-2015, 06:28 PM	#47 (permalink)
tonyHTX Enthusiast Member Join Date: Feb 2014 Location: Houston Posts: 254 Drives: Race, Repair, Repeat Rep Power: 4638	In the past few weeks my Southbend Stage 3 Endurance clutch had started slipping in the higher gears. I called Southbend and I was told that the clutch should hold around 480 torque... At the flywheel! I'm at 525 wheel torque so it slipping is kind of to be expected, it did hold pretty well the last 4+ months though. On top of that my transmission, which has 94k miles, has started grinding in 5th gear and 6th gear. This isn't a total surprise considering how much power the car puts out now, but it wasn't an issue that I was anticipating to happen. I called a local salvage yard to get a used transmission and they delivered it within a few hours! But, that means my car will be going back to the shop very soon. Luckily, I have obtained most of the parts for my next phase: Special thanks to phunk for the first ever CJM Stage 3 Fuel Return System for HR motors, as well as the picture! Since this is happening sooner than I was planning there are two things that I wanted to get but I just can't afford them when the transmission is thrown into the mix. I guess those will have to wait until next year or so, hopefully this is enough to tide me over until then! jaytirbhaw likes this. __________________ 2007 G37S [VQ37HR] Sedan 6MT - Fast Intentions Stage 3 TT - @ttv36 #tptoons Last edited by tonyHTX; 08-05-2015 at 06:31 PM.

08-09-2015, 05:21 PM	#48 (permalink)
tonyHTX Enthusiast Member Join Date: Feb 2014 Location: Houston Posts: 254 Drives: Race, Repair, Repeat Rep Power: 4638	To Infiniti.. TerribleONE, jaytirbhaw, GaleForce and 3 others like this. __________________ 2007 G37S [VQ37HR] Sedan 6MT - Fast Intentions Stage 3 TT - @ttv36 #tptoons

09-05-2015, 03:03 AM	#49 (permalink)
tonyHTX Enthusiast Member Join Date: Feb 2014 Location: Houston Posts: 254 Drives: Race, Repair, Repeat Rep Power: 4638	My first time ever to the drag strip tonight. My best time for the night was: I think that run was 12.7, I need to learn how to launch better without spinning first and second. I'm sure better tires and/or drag radials would help. Edit: Inside my very first run. I didn't even know where to line up hah YzGyz and AV8rZ like this. __________________ 2007 G37S [VQ37HR] Sedan 6MT - Fast Intentions Stage 3 TT - @ttv36 #tptoons Last edited by tonyHTX; 09-05-2015 at 04:00 AM.

09-08-2015, 01:24 PM	#51 (permalink)
tonyHTX Enthusiast Member Join Date: Feb 2014 Location: Houston Posts: 254 Drives: Race, Repair, Repeat Rep Power: 4638	Here is another video from the inside where I got toasted by a bad arse truck on drag radials. He ran a 12.5 and I ran a 12.6. To add insult to injury my passenger got kicked out! Hopefully I can learn how to launch the car properly at the strip. __________________ 2007 G37S [VQ37HR] Sedan 6MT - Fast Intentions Stage 3 TT - @ttv36 #tptoons

09-05-2015, 10:28 AM	#50 (permalink)
AV8rZ Base Member Join Date: Mar 2015 Location: The other LA Posts: 192 Drives: 40th Build#374 Rep Power: 10	Your car is BA!

09-08-2015, 01:39 PM	#52 (permalink)
jaytirbhaw Track Member Join Date: Dec 2009 Location: NYC Posts: 814 Drives: 350z HR , Nismo 370z Rep Power: 17	sick car and build man __________________ 2014 Nismo #350 , Built Motor, Top Mount Single Turbo .... 620 whp/ 500 lbs wtq 2012 Track/Drift Z, build coming soon. Build Thread - http://www.the370z.com/members-370z-...70z-build.html

09-24-2015, 03:38 PM	#53 (permalink)
tonyHTX Enthusiast Member Join Date: Feb 2014 Location: Houston Posts: 254 Drives: Race, Repair, Repeat Rep Power: 4638	Finished the switch to corn - special thanks to phunk / CJM for the (first?) Stage 3 RFS for a V36 sedan! We stopped here for today, hopefully I will have time to write up more details this weekend: jaytirbhaw, JARblue, GaleForce and 1 others like this. __________________ 2007 G37S [VQ37HR] Sedan 6MT - Fast Intentions Stage 3 TT - @ttv36 #tptoons

09-24-2015, 11:37 PM	#54 (permalink)
GaleForce A True Z Fanatic Join Date: Aug 2011 Location: Ontario, Canada Posts: 21,749 Drives: Varis Arising II Rep Power: 51865	Holy Sht!!!! Tony, why didn;t you message that to me? Beast mode engaged! __________________ >>>GaleForce's Build*<<< >>>FaceBook @3GsCustoms<<<>>>Instagram @GaleForce370z<<< Varis Kamikaze-Z

09-24-2015, 11:38 PM	#55 (permalink)
GaleForce A True Z Fanatic Join Date: Aug 2011 Location: Ontario, Canada Posts: 21,749 Drives: Varis Arising II Rep Power: 51865	Damn! That torque! __________________ >>>GaleForce's Build<<< >>>FaceBook @3GsCustoms<<<>>>Instagram @GaleForce370z<<< Varis Kamikaze-Z

09-24-2015, 11:39 PM	#56 (permalink)
jwick A True Z Fanatic Join Date: Dec 2010 Location: Houston Posts: 14,532 Drives: '10 G37 6MT Rep Power: 2465057	S.O.S. - Signaled Out Sedan That is definitely a monster of a build. Think I'll go watch him at the grag strip tomorrow GaleForce likes this. __________________ '10 G37T 6MT Graphite/Graphite - BP - G37T Build

09-25-2015, 01:54 AM	#59 (permalink)
YzGyz A True Z Fanatic Join Date: Jun 2013 Location: Houston Posts: 1,449 Drives: 2010 Nismo Rep Power: 63	I'm going out to Royal tomorrow. I'm meeting a boosted stang out there. Hope Tony and you come out. YzGyz __________________ http://www.the370z.com/members-370z-...gyzs-turn.html YzGyz

09-25-2015, 09:53 AM	#60 (permalink)
Lt8Che Enthusiast Member Join Date: Jul 2015 Location: Texas Posts: 300 Drives: 10-G37x-Black-7AT Rep Power: 10	In for results, if I was closer I'd come out. Be safe and have fun! YzGyz likes this.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
X37X Sedan	ANMVQ	Exterior & Interior	1	07-13-2014 09:45 AM
G37 sedan Wheels on Z?	Alto101	Wheels & Tires	4	06-22-2011 08:42 AM
G37x Sedan?	AZP Installs	North East Region	23	03-04-2011 08:21 PM
Test drove G37 Sedan and 370Z Sport..Sedan Faster	KillBill	Other Vehicles	12	11-14-2010 03:28 PM
FS: 05.5 Audi B7 S4 sedan	HKYStormFront	Other Vehicle For sale	3	11-08-2010 03:19 PM