Tturbo370z 800whp build thread

YzGyz · 02-10-2015, 03:02 PM

Yup

Quote:

Originally Posted by tturbo370z

I have been battling not going wide body for quit a while now. I finally came to grips with repainting the entire car not long ago. I will inquire about doing a true widebidy but am unaware of anyone here capable of doing something here in Phx like DTM did for mikes Z. Oh and the wife would stop putting out Indefinetly

but........I'm still thinkig about it

ugh means these wheels are not gonna be deep enuf......again

A performance/sticky tire I a 405?

me want to see it

At lest the wife let's you ride the girl in the garage hard. But, it's not the same nor smart. I'd choose the wife for now. This is comming from a single man.

Edit: I forgot to mention u out have some BIG BALLS for even thinking it.. lol

YzGyz

JARblue · 02-10-2015, 03:44 PM

560mm (22") wide lol

Mickey Thompson 6657 Tire 560 mm Tire Width, 40, 15 in. Wheel Diameter - JCWhitney

This guy looks pretty mean, too (don't think it's quite 560 tho)
Hoosier 19410, Hoosier Pro Street Radial Tires | Hoosier

Rusty · 02-10-2015, 03:52 PM

Quote:

Originally Posted by JARblue

560mm (22") wide lol

Mickey Thompson 6657 Tire 560 mm Tire Width, 40, 15 in. Wheel Diameter - JCWhitney

This guy looks pretty mean, too (don't think it's quite 560 tho)
Hoosier 19410, Hoosier Pro Street Radial Tires | Hoosier

Wonder what a Z would look like running a square set-up with those.

JARblue · 02-10-2015, 03:55 PM

SQUARE!!

That would be like a quad dualie 370Z. Each tire is bigger than two stock sport package rear tires combined

tturbo370z · 02-11-2015, 02:19 AM

Quote:

Originally Posted by Rusty

Wonder what a Z would look like running a square set-up with those.

The opposite of the stances crowd, but safer

of course u can kiss your knuckles, u joints , tie rods etc good bye but hey it looks cool

onzedge · 02-14-2015, 06:02 AM

Quote:

Originally Posted by JARblue

560mm (22") wide lol

Mickey Thompson 6657 Tire 560 mm Tire Width, 40, 15 in. Wheel Diameter - JCWhitney

This guy looks pretty mean, too (don't think it's quite 560 tho)
Hoosier 19410, Hoosier Pro Street Radial Tires | Hoosier

I can make those fit!!!

gbrettin · 02-14-2015, 09:44 AM

Quote:

Originally Posted by onzedge

I can make those fit!!!

Anything can be done with a sawzall...

More room for tires? check! Weight reduction? check! Speed holes? check!

Nice work on the build and thanks for sharing the pictures!

Rid3_FaM0uS · 02-14-2015, 12:13 PM

Orrrr you could just do it the simple way and run hella negative offsets and one mean *** widebody kit!

Rusty · 02-14-2015, 01:09 PM

Plasma cutter, mig welder, 2 open top 55gal drums cut down the middle and then cut the bottom off. Plasma cut the fender arches on the car. Mount the tires on the car. Put 2x4's on top of the tires for tub clearance. Now put put your cut drum pieces on top of the tires, and weld into place.

I DO have a picuture of this in my head.

Because I have done this before on a friends 4x4.

tturbo370z · 02-14-2015, 01:25 PM

Quote:

Originally Posted by Rusty

Plasma cutter, mig welder, 2 open top 55gal drums cut down the middle and then cut the bottom off. Plasma cut the fender arches on the car. Mount the tires on the car. Put 2x4's on top of the tires for tub clearance. Now put put your cut drum pieces on top of the tires, and weld into place.

I DO have a picuture of this in my head.

Because I have done this before on a friends 4x4.

Get your butt to Phx then rusty and let's do this

I don't think the wife wouldn't mind me ordering yet another set of wheels n tires b4 my latest set show up

GaleForce · 02-14-2015, 02:04 PM

Quote:

Originally Posted by tturbo370z

Get your butt to Phx then rusty and let's do this

I don't think the wife wouldn't mind me ordering yet another set of wheels n tires b4 my latest set show up

You like to play with fire, don't you?

Rid3_FaM0uS · 02-16-2015, 07:35 PM

I truly believe he does sometimes lmfao

tturbo370z · 03-03-2015, 12:47 PM

My wheels and tires are out for delivery and I'm at work noooooooooo!!!

bullitt5897 · 03-03-2015, 01:00 PM

FYI... if you start running into backpressure issues... look into porting the turbo manifold! I am on the T25+ custom housings and I was able to remove over 1/4" of material from the turbo manifold outlet!

jwick · 03-03-2015, 01:20 PM

Quote:

Originally Posted by tturbo370z

My wheels and tires are out for delivery and I'm at work noooooooooo!!!

Cough...cough...cough...

You are looking ill. I think you should probably head home for the day

02-10-2015, 03:44 PM	#92 (permalink)
JARblue A True Z Fanatic Join Date: Mar 2011 Location: Austin, TX Age: 43 Posts: 36,450 Drives: 11 Z34, 98 E36 M3 Rep Power: 2684440	560mm (22") wide lol Mickey Thompson 6657 Tire 560 mm Tire Width, 40, 15 in. Wheel Diameter - JCWhitney This guy looks pretty mean, too (don't think it's quite 560 tho) Hoosier 19410, Hoosier Pro Street Radial Tires \| Hoosier onzedge and FPenvy like this. __________________ 2011 370Z 6MT Sport Gun Metallic \| ARC \| CJM \| Ecutek \| FI \| Fujimura \| R2C \| SPL \| Stillen \| TWM \| Z1 \| ZSpeed \|

02-10-2015, 03:55 PM	#94 (permalink)
JARblue A True Z Fanatic Join Date: Mar 2011 Location: Austin, TX Age: 43 Posts: 36,450 Drives: 11 Z34, 98 E36 M3 Rep Power: 2684440	SQUARE!! That would be like a quad dualie 370Z. Each tire is bigger than two stock sport package rear tires combined __________________ 2011 370Z 6MT Sport Gun Metallic \| ARC \| CJM \| Ecutek \| FI \| Fujimura \| R2C \| SPL \| Stillen \| TWM \| Z1 \| ZSpeed \|

02-14-2015, 12:13 PM	#98 (permalink)
Rid3_FaM0uS Track Member Join Date: Apr 2012 Location: Wapakoneta, Ohio Posts: 506 Drives: 2011 BS Nismo 370z Rep Power: 44	Orrrr you could just do it the simple way and run hella negative offsets and one mean *** widebody kit! tturbo370z likes this. __________________ Always under construction. . .

02-14-2015, 01:09 PM	#99 (permalink)
Rusty Ronin Samurai - Assassin Join Date: Dec 2011 Location: Fayettenam,Pennsyltucky Age: 68 Posts: 35,217 Drives: 2011 Nismo GM 6M Rep Power: 2684438	Plasma cutter, mig welder, 2 open top 55gal drums cut down the middle and then cut the bottom off. Plasma cut the fender arches on the car. Mount the tires on the car. Put 2x4's on top of the tires for tub clearance. Now put put your cut drum pieces on top of the tires, and weld into place. I DO have a picuture of this in my head. Because I have done this before on a friends 4x4. JARblue, GaleForce and Ghostvette like this. __________________ 浪人 - 殺し屋 "The Difficult Anytime, The Impossible By Appointment Only" http://www.the370z.com/members-370z-...o-journal.html

02-16-2015, 07:35 PM	#102 (permalink)
Rid3_FaM0uS Track Member Join Date: Apr 2012 Location: Wapakoneta, Ohio Posts: 506 Drives: 2011 BS Nismo 370z Rep Power: 44	I truly believe he does sometimes lmfao tturbo370z likes this. __________________ Always under construction. . .

03-03-2015, 12:47 PM	#103 (permalink)
tturbo370z Track Member Join Date: May 2012 Location: Az Posts: 622 Drives: 09 370z sport 6mt Rep Power: 128	My wheels and tires are out for delivery and I'm at work noooooooooo!!! __________________ JUST STUFF 800whp700wtq Tturbo370z 800whp build https://instagram.com/jdm_370z

03-03-2015, 01:00 PM	#104 (permalink)
bullitt5897 Premium Member Join Date: Jan 2009 Location: North GA Posts: 6,831 Drives: Twin Turbo Z34 Rep Power: 3682	FYI... if you start running into backpressure issues... look into porting the turbo manifold! I am on the T25+ custom housings and I was able to remove over 1/4" of material from the turbo manifold outlet! __________________ *Shop Cars: 2013 318whp Nismo VspecII 370z SOLD, 2009 1000hp+ 93oct 4.0L TT 370z Fast Intentions STAGE 4 #054*

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Seraphix' build thread	Seraphix	Member's 370Z Gallery	72	10-14-2015 06:56 AM
My Build Thread	370z1129	Nissan 370Z General Discussions	6	11-06-2014 05:54 PM
ENT-Z Build Thread	ENT-Z	Member's 370Z Gallery	68	09-06-2014 11:00 PM
FS/FT 800whp twin turbo 350z ohio	greedygenius	Other Vehicle For sale	2	11-08-2013 06:44 AM
THE "Lets argue about Bullitt's build with out ruining Bullitt's build thread" THREAD	Reaper42	Forced Induction	14	01-22-2011 06:24 PM