NOVA/DC/MD - Z's & Coffee, Saturdays at 10AM in [WHERE?!], VA & Columbia, MD

MightyBobo · 02-28-2013, 11:08 AM

Fgts

Sent from my Galaxy S3

Sales@AAMComp · 02-28-2013, 11:08 AM

Quote:

Originally Posted by MyKindaGuise

Truest story ever.

We have a design mocked up to use stock headers for a twin turbo front mount setup. Stock manifolds are pretty but they work and work well.

Everyone argues single vs twin but really if you plan well and do the math a single can get you almost identical spool.

Khoi how is the TT kit coming? Im dying to know how those EFR's spool on our cars. NEED RESULTS BUDDY!!

The motor is pulled and we mocked up the manifold and turbos, right now our engineer is drawing up the fmic and i/c pipes

I'd like for us to be able to test fit everything on our 370z here, do the power testing and what not, but end up "sponsoring" a local customer with the full kit if they plan on doing shows and what not (DM i know we kind of went over this a bit already with you) since our 370z here is bone stock lol

Sales@AAMComp · 02-28-2013, 11:11 AM

Quote:

Originally Posted by m4a1mustang

I talked to AAM long ago about doing it right on my Z. I wanted everything from the Defi setup to every supporting mod I needed for the car to handle the power reliably and drive perfectly. Was looking around $18k parts and labor for a custom TT setup.

I think that's pretty close actually, when you are talking bone stock z to a complete TT kit, installed, tuned (we're talking gauges, exhaust, complete fuel system etc) Installation of a lot of the parts take a good chunk of time..

Quote:

Originally Posted by dmhenderson

Yes that's because AAM works on GT-Rs and you will pay GT-R prices for that level of service. Feel free to prove me wrong though haha.

(no offense intended of course)

our hourly book rate is higher than your average mom and pop shop due to this huge facility, so a lot of times labor at AAM is going to cost a bit more, but when you actually book out a complete TT install, we're looking at over 30+ hours..

m4a1mustang · 02-28-2013, 11:15 AM

Quote:

Originally Posted by Khoi@AAMComp

I think that's pretty close actually, when you are talking bone stock z to a complete TT kit, installed, tuned (we're talking gauges, exhaust, complete fuel system etc) Installation of a lot of the parts take a good chunk of time..

our hourly book rate is higher than your average mom and pop shop due to this huge facility, so a lot of times labor at AAM is going to cost a bit more, but when you actually book out a complete TT install, we're looking at over 30+ hours..

Yeah it wasn't bad at all considering what all was being done. And at that point I had seen what you guys did with Lou's Z and was impressed.

But I decided it wasn't worth it for this car. I'd just eventually buy something a little higher up on the totem pole.

Sales@AAMComp · 02-28-2013, 11:16 AM

Quote:

Originally Posted by m4a1mustang

Yeah it wasn't bad at all considering what all was being done. And at that point I had seen what you guys did with Lou's Z and was impressed.

But I decided it wasn't worth it for this car. I'd just eventually buy something a little higher up on the totem pole.

Yeah, I'm sure there are a lot that pay that amount and end up

'ing after they realize how much they just spent lol

MyKindaGuise · 02-28-2013, 11:17 AM

Quote:

Originally Posted by dmhenderson

You're a goddamned mechanical wizard though and you do most of your own work. Not sure that's a fair comparison.

I wish I was a wizard. Seriously my friend Pat that you met...he has tought me everything I know and is literaly 70% the mastermind behing everything im doing. Luckily we have a pretty good business agreement.

For real though if I did a build Identical to mine(keep in mind I had some luck with cheap parts) It would be maybe 3000-3500 in parts and 1000-1500 in labor. But im also doing alot of pointless crap like prepping for e85 usage so there is a little extra money going into that... ie $900 injectors haha

I would like to finish my build and perfect it before I get anyone else involved.

m4a1mustang · 02-28-2013, 11:17 AM

And lets face it, if you want to do a proper TT setup on the Z, you NEED gauges, clutch upgrade, FI optimized exhaust, etc.

The stock suspension could use some work too.

m4a1mustang · 02-28-2013, 11:18 AM

Quote:

Originally Posted by Khoi@AAMComp

Yeah, I'm sure there are a lot that pay that amount and end up

'ing after they realize how much they just spent lol

If I was really in love with the Z and had the cash to blow it would probably be worth it, but when you start to think about it you can just get into a (no offense) better car and get that performance straight from the factory for around the same total cost. To each his own, though.

Sales@AAMComp · 02-28-2013, 11:20 AM

Quote:

Originally Posted by m4a1mustang

If I was really in love with the Z and had the cash to blow it would probably be worth it, but when you start to think about it you can just get into a (no offense) better car and get that performance straight from the factory for around the same total cost. To each his own, though.

I agree 100%

Red__Zed · 02-28-2013, 11:20 AM

new thread!

m4a1mustang · 02-28-2013, 11:21 AM

Quote:

Originally Posted by Red__Zed

new thread!

needs more ghey

MyKindaGuise · 02-28-2013, 11:23 AM

Quote:

Originally Posted by Khoi@AAMComp

The motor is pulled and we mocked up the manifold and turbos, right now our engineer is drawing up the fmic and i/c pipes

I'd like for us to be able to test fit everything on our 370z here, do the power testing and what not, but end up "sponsoring" a local customer with the full kit if they plan on doing shows and what not (DM i know we kind of went over this a bit already with you) since our 370z here is bone stock lol

Thats awesome Khoi, Im really looking forward to the finished build. If AAM does sponosor a local Z my god someone from here take them up on that. It will be a supreme build.

Honestly a good TT build can cost 15k plus. AAM can charge a premium just because they are AAM. They do good work and fabrication and are known for it. Good reputation costs money. Peace of mind in a shop isnt cheap.

I am doing alot of the supporting mods to make sure my build IS reliable to track once in a while and daily drive some times. I am not a baller so I dont have cash to just blow on a broken car constantly also I love my 370 and dont want to damage it so reliablity is TOP priority for me.

b1adesofcha0s · 02-28-2013, 11:25 AM

Quote:

Originally Posted by m4a1mustang

If I was really in love with the Z and had the cash to blow it would probably be worth it, but when you start to think about it you can just get into a (no offense) better car and get that performance straight from the factory for around the same total cost. To each his own, though.

Yup that's my plan too.

Sales@AAMComp · 02-28-2013, 11:25 AM

Quote:

Originally Posted by MyKindaGuise

Thats awesome Khoi, Im really looking forward to the finished build. If AAM does sponosor a local Z my god someone from here take them up on that. It will be a supreme build.

Honestly a good TT build can cost 15k plus. AAM can charge a premium just because they are AAM. They do good work and fabrication and are known for it. Good reputation costs money. Peace of mind in a shop isnt cheap.

I am doing alot of the supporting mods to make sure my build IS reliable to track once in a while and daily drive some times. I am not a baller so I dont have cash to just blow on a broken car constantly also I love my 370 and dont want to damage it so reliablity is TOP priority for me.

Thanks for the kind words! Yeah I am pretty excited to move forward with the kit!

Red__Zed · 02-28-2013, 11:26 AM

Quote:

Originally Posted by m4a1mustang

needs more ghey

That's what I'm here for.

02-28-2013, 11:08 AM	#31 (permalink)
MightyBobo A True Z Fanatic Join Date: Feb 2009 Location: Las Vegas, NV Posts: 8,465 Drives: No cars; only bikes Rep Power: 52	Fgts Sent from my Galaxy S3 m4a1mustang and b1adesofcha0s like this. __________________ I don't own a car anymore.

02-28-2013, 11:17 AM	#37 (permalink)
m4a1mustang A True Z Fanatic Join Date: Feb 2009 Location: Northern VA Posts: 55,385 Drives: on two wheels Rep Power: 6962	And lets face it, if you want to do a proper TT setup on the Z, you NEED gauges, clutch upgrade, FI optimized exhaust, etc. The stock suspension could use some work too. __________________ - Steve Zs & Coffee - Saturdays at 10AM in Fairfax, VA and Columbia, MD (Click the banner!) LIKE us on Facebook!

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
NOVA/DC/MD - Z's & Coffee Saturday's at 10AM in Fairfax, VA & Columbia, MD	m4a1mustang	Mid-Atlantic Region	10002	02-28-2013 10:45 AM
NOVA: Zs & Coffee - Starbucks every Saturday @ 10AM	m4a1mustang	Mid-Atlantic Region	10011	01-22-2012 02:54 PM
NoVA Starbucks Cars and Coffee 1 May 2011	ZCarMan	Mid-Atlantic Region	5	05-01-2011 08:11 PM
NOVA: Cars & Coffee - Starbucks every Sunday @ 8AM	SHIROZE	Mid-Atlantic Region	5	12-05-2010 06:34 PM
Pics n Vids from Cars n Coffee Saturdays @ Performance	JDMFairlady21	North East Region	12	11-27-2010 01:01 AM

02-28-2013, 11:20 AM	#40 (permalink)
Red__Zed A True Z Fanatic Join Date: Jul 2010 Location: window seat Posts: 28,940 Drives: Mostly on two wheels Rep Power: 120	new thread!