Making my own CF parts... Need help!

!xoible · 08-31-2009, 01:18 PM

I am not sure that i am retarded or not, but here's my problem... I have an old desk at home that i want to use. The surface is all scratched up, so i want to renovate it. I am thinking of wrapping it in CF, and if that succeeds my book case will follow, and other pieces in my bed room.

Everything is perfectly flat and rectangular, so i wont be dealing with weird edges, which is what made me think this is somewhat easy.

The real problem is i do not know where to begin, what the process is, where i can get each of the parts, and what parts, tools are needed and why they're needed. i did some googling of the issue, there's some good stuff out there, but i trust my fellow car forum posters the most...

HERP PREEZ

Oh forgot to mention, i want the final product to be completely matte, not glossy...

2theextreme · 08-31-2009, 01:26 PM

Dang! I got all excited....thought you meant you were making 'em for the 370! Then I checked which thread I was in.

!xoible · 08-31-2009, 01:44 PM

lol i gotta start from somewhere, and if i am to make car parts i probably shouldnt make your cars my experiment lab

dude, if i am to make this successfully i am definitely making splitters for my car, coz no one makes them yet!

the process sounds complex... i scuuurrrrr

Chupacabra · 08-31-2009, 02:16 PM

There is not much mystery behind CF... but practice does make you better.

You need to buy the actual CF roll, and the resin. put a layer of cf, and then soak it with resin, and then proceed to another layer. When dried, wet sand, and well clear coat if you want it shiny, or use dry CF if you want the matt look. You wont be using a vacum bag so the flat surfaces will be ok, but the sides might be a pain in the a$$ to produce.

or just pm John at spawn Aero, that dude knows it all when it comes to carbon fiber.

speedfreak28 · 08-31-2009, 02:17 PM

Carbon fiber is fairly difficult to work with and pretty expensive,if you dont have much experience with fiberglass I wouldnt experiment. Raw carbon fiber is 50 bucks a yard at least. Also unlike fiberglass it cant be sanded and refinished, it has to be liad right the first time. If you want the look just buy soem carbon fiber vinyl sticker by the yard for cheap

feel free to pm me with any questions.

!xoible · 08-31-2009, 02:18 PM

ah! awesome. i was scared of the vacuum mostly. i'll give that a shot see see how it comes out. thanks man!

Chupacabra · 08-31-2009, 02:20 PM

Practice a little first... what speedfreak said is true, its not fiberglass it wont forgive your screw ups.

BME - Brano Meres

that dude built a frame out of CF and goes step by step, it helps to see what you need to do and how to do it.

!xoible · 08-31-2009, 02:31 PM

yah i plan on experimenting with small pieces first. i dont think what i am trying to accomplish is rocket science really since everything is perfectly flat.

if i am to go with vinyl, which was my second option, then i will definitely do a matte black vinyl all over. im willing to experiment a little though.

Chupacabra, thanks for the link!

BanningZ · 08-31-2009, 03:02 PM

I've got a roll of CF. Probably not enough to do a desk though.

nogoodname · 08-31-2009, 03:05 PM

i wanna wrap my toilet seat and toilet in CF.... any idea on how to wrap a seat and ceramic toilets?????

Chupacabra · 08-31-2009, 03:07 PM

sad part is, I think someone out there has managed to make everything out of CF

BanningZ · 08-31-2009, 03:09 PM

Quote:

Originally Posted by Chupacabra

sad part is, I think someone out there has managed to make everything out of CF

Lighter = Faster.

violent lightning fast turds FTW?

Chupacabra · 08-31-2009, 03:10 PM

because, eating cheerios in the morning is all about speed.

!xoible · 08-31-2009, 03:10 PM

nice! last time i used a CF condom i had a rash for 3 days on the shlong lol

BanningZ · 08-31-2009, 03:11 PM

Quote:

Originally Posted by !xoible

nice! last time i used a CF condom i had a rash for 3 days on the shlong lol

did you blow your wad at lightning speed?

Ouch vag burns

08-31-2009, 01:18 PM	#1 (permalink)
!xoible Base Member Join Date: Feb 2009 Location: west Posts: 245 Drives: some car Rep Power: 186	Making my own CF parts... Need help! I am not sure that i am retarded or not, but here's my problem... I have an old desk at home that i want to use. The surface is all scratched up, so i want to renovate it. I am thinking of wrapping it in CF, and if that succeeds my book case will follow, and other pieces in my bed room. Everything is perfectly flat and rectangular, so i wont be dealing with weird edges, which is what made me think this is somewhat easy. The real problem is i do not know where to begin, what the process is, where i can get each of the parts, and what parts, tools are needed and why they're needed. i did some googling of the issue, there's some good stuff out there, but i trust my fellow car forum posters the most... HERP PREEZ Oh forgot to mention, i want the final product to be completely matte, not glossy... __________________ welcome to the internet. now ur out of ur ***** mind if you get offended at this ** ^^^ Last edited by !xoible; 08-31-2009 at 01:22 PM.

08-31-2009, 01:26 PM	#2 (permalink)
2theextreme RIP Tony :( (1969-2015) Join Date: Feb 2009 Location: Northern Virginia Posts: 18,802 Drives: '14 Mustang GT/CS Rep Power: 68	Dang! I got all excited....thought you meant you were making 'em for the 370! Then I checked which thread I was in. __________________ SpinTech Mufflers, Airaid CAI, JBA H-Pipe, Lethal Performance Over Axle Pipes, MMD Quarter Panel Louvers, Cervini's Ram Air Type IV Hood, Carbon Fiber Radiator Cover, GT500 Rear Valance, Quad Exhaust Tips

08-31-2009, 01:44 PM	#3 (permalink)
!xoible Base Member Join Date: Feb 2009 Location: west Posts: 245 Drives: some car Rep Power: 186	lol i gotta start from somewhere, and if i am to make car parts i probably shouldnt make your cars my experiment lab dude, if i am to make this successfully i am definitely making splitters for my car, coz no one makes them yet! the process sounds complex... i scuuurrrrr __________________ welcome to the internet. now ur out of ur ***** mind if you get offended at this ** ^^^

08-31-2009, 02:16 PM	#4 (permalink)
Chupacabra Enthusiast Member Join Date: Jan 2009 Location: Weston, Florida Posts: 477 Drives: 09 Nissan 370z s M6 Rep Power: 201	There is not much mystery behind CF... but practice does make you better. You need to buy the actual CF roll, and the resin. put a layer of cf, and then soak it with resin, and then proceed to another layer. When dried, wet sand, and well clear coat if you want it shiny, or use dry CF if you want the matt look. You wont be using a vacum bag so the flat surfaces will be ok, but the sides might be a pain in the a$$ to produce. or just pm John at spawn Aero, that dude knows it all when it comes to carbon fiber. __________________ Where are my aluminum pedals?

08-31-2009, 02:18 PM	#6 (permalink)
!xoible Base Member Join Date: Feb 2009 Location: west Posts: 245 Drives: some car Rep Power: 186	ah! awesome. i was scared of the vacuum mostly. i'll give that a shot see see how it comes out. thanks man! __________________ welcome to the internet. now ur out of ur ***** mind if you get offended at this ** ^^^

08-31-2009, 02:17 PM	#5 (permalink)
speedfreak28 Base Member Join Date: Jul 2009 Location: south jersey Posts: 247 Drives: 05 ram, 79 z28 Rep Power: 16	Carbon fiber is fairly difficult to work with and pretty expensive,if you dont have much experience with fiberglass I wouldnt experiment. Raw carbon fiber is 50 bucks a yard at least. Also unlike fiberglass it cant be sanded and refinished, it has to be liad right the first time. If you want the look just buy soem carbon fiber vinyl sticker by the yard for cheap feel free to pm me with any questions.

08-31-2009, 02:20 PM	#7 (permalink)
Chupacabra Enthusiast Member Join Date: Jan 2009 Location: Weston, Florida Posts: 477 Drives: 09 Nissan 370z s M6 Rep Power: 201	Practice a little first... what speedfreak said is true, its not fiberglass it wont forgive your screw ups. BME - Brano Meres that dude built a frame out of CF and goes step by step, it helps to see what you need to do and how to do it. __________________ Where are my aluminum pedals?

08-31-2009, 02:31 PM	#8 (permalink)
!xoible Base Member Join Date: Feb 2009 Location: west Posts: 245 Drives: some car Rep Power: 186	yah i plan on experimenting with small pieces first. i dont think what i am trying to accomplish is rocket science really since everything is perfectly flat. if i am to go with vinyl, which was my second option, then i will definitely do a matte black vinyl all over. im willing to experiment a little though. Chupacabra, thanks for the link! __________________ welcome to the internet. now ur out of ur ***** mind if you get offended at this ** ^^^

08-31-2009, 03:02 PM	#9 (permalink)
BanningZ A True Z Fanatic Join Date: Nov 2008 Location: nowhere Posts: 5,478 Drives: 06' Nismo Frontier Rep Power: 29	I've got a roll of CF. Probably not enough to do a desk though. __________________ Become a Premium Member: Click HERE MB 06' Nismo VQ40DE

08-31-2009, 03:05 PM	#10 (permalink)
nogoodname Lifetime Premium Join Date: Nov 2008 Location: Montreal Posts: 22,357 Drives: E46 M3 Rep Power: 1765	i wanna wrap my toilet seat and toilet in CF.... any idea on how to wrap a seat and ceramic toilets?????

08-31-2009, 03:07 PM	#11 (permalink)
Chupacabra Enthusiast Member Join Date: Jan 2009 Location: Weston, Florida Posts: 477 Drives: 09 Nissan 370z s M6 Rep Power: 201	sad part is, I think someone out there has managed to make everything out of CF __________________ Where are my aluminum pedals?

08-31-2009, 03:10 PM	#13 (permalink)
Chupacabra Enthusiast Member Join Date: Jan 2009 Location: Weston, Florida Posts: 477 Drives: 09 Nissan 370z s M6 Rep Power: 201	because, eating cheerios in the morning is all about speed. __________________ Where are my aluminum pedals?

08-31-2009, 03:10 PM	#14 (permalink)
!xoible Base Member Join Date: Feb 2009 Location: west Posts: 245 Drives: some car Rep Power: 186	nice! last time i used a CF condom i had a rash for 3 days on the shlong lol __________________ welcome to the internet. now ur out of ur ***** mind if you get offended at this ** ^^^

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
NISMO's, How many are they making?	Equinox	Nissan 370Z General Discussions	14	11-27-2009 09:57 PM
Making stock seats two-tone?	IHas370Z?	Exterior & Interior	16	10-20-2009 07:19 AM
New Altima and 370Z convertible commercial in the making?	AK370Z	Nissan 370Z General Discussions	2	08-22-2009 09:17 AM
Help...The car is making a wierd noise	armensti	Nissan 370Z General Discussions	13	07-13-2009 08:15 PM
Thinking About Making the Switch	Pkskull77	New Forum Member	1	05-17-2009 09:29 AM