The New "What did you do with your Z today" (with off topic replies) IV

blackcherry20 · 04-01-2013, 07:55 PM

Quote:

Originally Posted by JARblue

Sounds good. I never did clay on my cars before the Z, so it's been a new adventure. I'm going to be polishing the panels before the summer, so anything that might happen can be fixed then.

I figured it wouldn't be a big deal, but I just wanted to get some additional feedback. If someone has a good reason why they do something a particular way, I'd like to know and see if it works for me as well. You're always welcome to advise me

after all you are older than me

fixed

kenchan · 04-01-2013, 08:09 PM

Quote:

Originally Posted by JARblue

anyone?

mr.jar- i would use it while wiping dry so that your spray wax can add lubricity and let your waffle glide.

at least that's how i use prima hydro.

and you dont NEED to clay before wax. it's better you have no contaminants on the paint to maximize wax/polymer adhesion, but not necessary especially if spray wax as it's a quicky like mr.alcheng said.

wheew, just got done inspecting my new HU for fit, re-position the gopro in my Z, and some other stuff for the house. ordered up another plate frame as the one i got today was kinda

. hope the new one i ordered comes through..

griots stopped selling plate frames so i can't get the same ones ive been using with great success.

happytheman · 04-01-2013, 08:21 PM

Quote:

Originally Posted by JARblue

I just finished washing the Z

I am tempted to wipe it down with some Meguiar's Quik Wax spray that I haven't ever used. Would this be ok to do after the fresh wash even if I don't clay?

It's not going to hurt. Meg's makes some good products. I would not necessarily use it to replace a proper waxing, but if you want to use it to extend the life of the wax you do put down, by all means.

I'm curious to get your feedback on the product. Let us know your thoughts after the fact.

ZMan8 · 04-01-2013, 08:46 PM

Quote:

Originally Posted by happytheman

It's not going to hurt. Meg's makes some good products. I would not necessarily use it to replace a proper waxing, but if you want to use it to extend the life of the wax you do put down, by all means.

I'm curious to get your feedback on the product. Let us know your thoughts after the fact.

I have used it last year with a lot of success . Just don't expect it to last a long time.

Sent from my SAMSUNG-SGH-I747 using Tapatalk 2

JARblue · 04-01-2013, 08:51 PM

Quote:

Originally Posted by alcheng

Spray wax is more like a quicky, you use it in between regular wax.

Excellent

I might have to get more of this stuff. I feel like I don't wax often enough already, so this stuff after the in between washes seems perfect!

Quote:

Originally Posted by blackcherry20

fixed

Quote:

Originally Posted by kenchan

mr.jar- i would use it while wiping dry so that your spray wax can add lubricity and let your waffle glide.

at least that's how i use prima hydro.

and you dont NEED to clay before wax. it's better you have no contaminants on the paint to maximize wax/polymer adhesion, but not necessary especially if spray wax as it's a quicky like mr.alcheng said.

Your explanations are always comforting, Mr. Kenchan

I'd rep you if I weren't out

Quote:

Originally Posted by happytheman

It's not going to hurt. Meg's makes some good products. I would not necessarily use it to replace a proper waxing, but if you want to use it to extend the life of the wax you do put down, by all means.

I'm curious to get your feedback on the product. Let us know your thoughts after the fact.

The Quik Wax spray seems like a solid product. I definitely have a nice shine that isn't there after a normal wash. And because it was incredibly easy to apply, I will probably make it standard routine for the washes in between clay and wax

( Click to show/hide )

JARblue · 04-01-2013, 08:53 PM

Quote:

Originally Posted by ZMan8

I have used it last year with a lot of success . Just don't expect it to last a long time.

That's the truth. I just had a small sample size (7 oz I think) and it's more than half gone after one use on the Z. Still, If I get a full size bottle, it should last about a year since I won't be using it during the full wash, clay, and wax sessions.

Pintsize725 · 04-01-2013, 09:07 PM

So I don't think the wrap is sticking very well.

( Click to show/hide )

Huck · 04-01-2013, 09:10 PM

Quote:

Originally Posted by JARblue

anyone?

Use a microfiber cloth and you're fine.

I would just like to take this time to say that my MIL is the worst dishwasher-loader I have ever seen. I just noticed the dishes were done so I thought I would be nice and unload it. This is what I find. FML.
ImageUploadedByTapatalk1364864975.737693.jpg

Sent from my iPizzle using magic and new-fangled science stuff

Huck · 04-01-2013, 09:12 PM

Quote:

Originally Posted by Pintsize725

So I don't think the wrap is sticking very well.

( Click to show/hide )

I hope you didn't pay actual money for that...

Sent from my iPizzle using magic and new-fangled science stuff

blackcherry20 · 04-01-2013, 09:14 PM

Quote:

Originally Posted by Huck

Use a microfiber cloth and you're fine.

I would just like to take this time to say that my MIL is the worst dishwasher-loader I have ever seen. I just noticed the dishes were done so I thought I would be nice and unload it. This is what I find. FML.
Attachment 66091

Sent from my iPizzle using magic and new-fangled science stuff

is she still living w you guys?!
Gawd. Hubby's nephew just left, been here since thursday.

omg.

Pintsize725 · 04-01-2013, 09:16 PM

Quote:

Originally Posted by Huck

I hope you didn't pay actual money for that...

Sent from my iPizzle using magic and new-fangled science stuff

No, the owner wasn't sure the wrap wwould stick so he tested it with just this one side. I'm texting him now to see if there is a better way to go about it or if this is it. If this is it, I'm getting in touch with a bodyshop to get it painted.

gurneyeagle · 04-01-2013, 09:22 PM

Quote:

Originally Posted by JARblue

That's the truth. I just had a small sample size (7 oz I think) and it's more than half gone after one use on the Z. Still, If I get a full size bottle, it should last about a year since I won't be using it during the full wash, clay, and wax sessions.

Mr. JAR - now that my work schedule is lightening up, I'd be more than happy to bring my Griot's stash to casa JAR for a wax "Tech Day". I've got both the 3" and 6" random orbital buffers and enough products to even make ms. pint happy (whose car we can work on too!). Might ask for a corner of a room to unroll a sleeping bag on, for the night, but happy to help.

JARblue · 04-01-2013, 09:25 PM

Here are the results of my first experience with Adam's Metal Polish 1 and 2:

Nissan 370Z Forum - JARblue's Album: Adams Metal Polish

I am quite happy with the results. This stuff definitely works better than any metal polishing products I tried previously. In fact, they never worked, which is probably the reason my exhaust tips got as dirty as they did.

Here is a close up after an initial clean with Windex

( Click to show/hide )

And here are the final results

( Click to show/hide )

GaleForce · 04-01-2013, 09:29 PM

Hooray! The forum is back to "normal"

XwChriswX · 04-01-2013, 09:32 PM

Quote:

Originally Posted by GaleForce

Hooray! The forum is ghey again!

Fixed.

04-01-2013, 09:07 PM	#8737 (permalink)
Pintsize725 A True Z Fanatic Join Date: Jan 2012 Location: Austin Posts: 14,196 Drives: 2016 Mazda 6 Rep Power: 211845	So I don't think the wrap is sticking very well. ( Click to show/hide ) __________________ Tracie

04-01-2013, 09:25 PM	#8743 (permalink)
JARblue A True Z Fanatic Join Date: Mar 2011 Location: Austin, TX Age: 44 Posts: 36,450 Drives: 11 Z34, 98 E36 M3 Rep Power: 2684440	Here are the results of my first experience with Adam's Metal Polish 1 and 2: Nissan 370Z Forum - JARblue's Album: Adams Metal Polish I am quite happy with the results. This stuff definitely works better than any metal polishing products I tried previously. In fact, they never worked, which is probably the reason my exhaust tips got as dirty as they did. Here is a close up after an initial clean with Windex ( Click to show/hide ) And here are the final results ( Click to show/hide ) kenchan, alcheng and gurneyeagle like this. __________________ 2011 370Z 6MT Sport Gun Metallic \| ARC \| CJM \| Ecutek \| FI \| Fujimura \| R2C \| SPL \| Stillen \| TWM \| Z1 \| ZSpeed \|

04-01-2013, 09:29 PM	#8744 (permalink)
GaleForce A True Z Fanatic Join Date: Aug 2011 Location: Ontario, Canada Posts: 21,749 Drives: Varis Arising II Rep Power: 51865	Hooray! The forum is back to "normal" kenchan, LMBmikeZ, JARblue and 1 others like this. __________________ >>>GaleForce's Build<<< >>>FaceBook @3GsCustoms<<<>>>Instagram @GaleForce370z<<< Varis Kamikaze-Z

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
The New "What did you do with your Z today" (with off topic replies) III	happytheman	The Lounge (Off Topic)	9956	02-10-2013 03:13 PM
The New "What did you do with your Z today" (with off topic replies) II	happytheman	The Lounge (Off Topic)	10004	12-24-2012 08:31 PM
The New "What did you do with your Z today" (with off topic replies)	happytheman	The Lounge (Off Topic)	10265	11-01-2012 12:15 AM
We learned a valuable lesson about the "VDC OFF" button today thanks to b1ades	birdmanx1	Mid-Atlantic Region	167	09-01-2011 10:50 AM
got to autocross a couple different"high end" cars today	MC	Other Vehicles	15	06-13-2009 08:48 PM