The New "What did you do with your Z today" (with off topic replies) IV

XwChriswX · 02-18-2013, 01:36 AM

Quote:

Originally Posted by JARblue

They were all the same brand (or at least from the same retailer/ebayer - I can't remember where I got them a long time ago). The ones in the pictures are 12, 24, and 48 LED. I ended up just going with the biggest one. You know how we Texans overcompensate

Fixed.

Hmm. eBay is spotty with things like this, but that's good you got them all from the same place.

JARblue · 02-18-2013, 01:40 AM

Quote:

Originally Posted by XwChriswX

Interesting, I went with the EVO-R one myself and love it. When I took the blank out, I didn't even think to keep/look at it in dept.

Are your LED's and their wiring water proof? Is the blank sealed? That might be something to look at?

I did think about that. Several notes on my install: I was able to use an existing tiny hole in the back of the housing, which originally had a black rubber cap on it. I removed the cap, ran my wiring, and replaced the cap. It still provides excellent protection and probably wouldn't allow water in unless completely submerged. The only other way water might get in was if I didn't do a good enough job sealing the lens back onto the housing, but I'm pretty sure it's just fine. The last precaution was I actually installed the panel on the roof of the housing, so it points down. I also like this because you can't see any of the LEDs through the lens.

JARblue · 02-18-2013, 01:42 AM

Note that I had to remove the wiring for the fog light when I was messing with the license plate lights. The fog light was working just fine up until that point. I have no reason to believe that it is damaged in any way. I just think I need to rewire, which I want to do properly and permanently this time.

XwChriswX · 02-18-2013, 01:42 AM

Quote:

Originally Posted by JARblue

I did think about that. Several notes on my install. I was able to use an existing tiny hole in the back of the house, which originally had a black rubber cap on it. I removed the cap, ran my wiring, and replaced the cap. It still provides excellent protection and probably wouldn't allow water in unless completely submerged in water. The only other way water might get in was if I didn't do a good enough job sealing the lens back onto the housing, but I'm pretty sure it's just fine. The last precaution was I actually installed the panel on the roof of the housing, so it points down. I also like this because you can't see any of the LEDs through the lens.

Then it sounds like you've thought of most everything on it. Good man.

I really like this part. It's just a solid glow.

JARblue · 02-18-2013, 01:45 AM

Quote:

Originally Posted by XwChriswX

Fixed.

Hmm. eBay is spotty with things like this, but that's good you got them all from the same place.

Some maybe... not all

All of them were previously installed and worked for several years

I have had good luck even with the cheap LEDs on ebay. Even the problems I've had are fixable with a little ingenuity.

XwChriswX · 02-18-2013, 01:48 AM

Quote:

Originally Posted by JARblue

Some maybe... not all

All of them were previously installed and worked for several years

I have had good luck even with the cheap LEDs on ebay. Even the problems I've had are fixable with a little ingenuity.

I'm with you on that. One mod causes another problem, you fix that but it brings up another problem, and so on, and so on...

IT NEVER ENDS!!

JARblue · 02-18-2013, 01:56 AM

Quote:

Originally Posted by XwChriswX

Then it sounds like you've thought of most everything on it. Good man.

I really like this part. It's just a solid glow.

Solid glow FTW. Honestly, one of the reasons I don't like the EVO-R fog light is because it looks like the individual LEDs are so obvious. Is that really the case?

Quote:

Originally Posted by XwChriswX

I'm with you on that. One mod causes another problem, you fix that but it brings up another problem, and so on, and so on...

IT NEVER ENDS!!

IKR!! Luckily, I've found spray paint, which is very accountant/wife-friendly and can satisfy that recurring desire for moar mods. I'm just trying not to go overboard - if I'm not careful, everything on the car inside and outside might wind up KAD

XwChriswX · 02-18-2013, 02:00 AM

Quote:

Originally Posted by JARblue

Solid glow FTW. Honestly, one of the reasons I don't like the EVO-R fog light is because it looks like the individual LEDs are so obvious. Is that really the case?

I will take some pictures tonight for you with mine on. I have the EVO-R Smoked lens since I thought it looked better than the Red on a black Z. Plus, when it's not on, it blends in with the body so you forget its there.

IKR!! Luckily, I've found spray paint, which is very accountant/wife-friendly and can satisfy that recurring desire for moar mods. I'm just trying not to go overboard - if I'm not careful, everything on the car inside and outside might wind up KAD

What about Plasti-Dip?

JARblue · 02-18-2013, 02:05 AM

Quote:

Originally Posted by XwChriswX

What about Plasti-Dip?

haven't gone there...

( Click to show/hide )

XwChriswX · 02-18-2013, 02:07 AM

Quote:

Originally Posted by JARblue

haven't gone there...

( Click to show/hide )

I wouldn't recommend plasti-dipping wheels personally, since it could peel from chipping/debris...

But that's just me...

JARblue · 02-18-2013, 02:10 AM

Quote:

Originally Posted by XwChriswX

I wouldn't recommend plasti-dipping wheels personally, since it could peel from chipping/debris...

But that's just me...

But that's an easy fix. Peel off and reapply plus you get another mod fix

XwChriswX · 02-18-2013, 02:14 AM

Quote:

Originally Posted by JARblue

But that's an easy fix. Peel off and reapply plus you get another mod fix

I don't like repeating the same mod though.. get's old. I want to constantly be improving, not re-doing.

JARblue · 02-18-2013, 02:19 AM

Quote:

Originally Posted by XwChriswX

I don't like repeating the same mod though.. get's old. I want to constantly be improving, not re-doing.

XwChriswX · 02-18-2013, 02:21 AM

Remind me tomorrow and I'll snap those pics for you.

JARblue · 02-18-2013, 02:22 AM

02-18-2013, 01:42 AM	#1353 (permalink)
JARblue A True Z Fanatic Join Date: Mar 2011 Location: Austin, TX Age: 44 Posts: 36,450 Drives: 11 Z34, 98 E36 M3 Rep Power: 2684440	Note that I had to remove the wiring for the fog light when I was messing with the license plate lights. The fog light was working just fine up until that point. I have no reason to believe that it is damaged in any way. I just think I need to rewire, which I want to do properly and permanently this time. __________________ 2011 370Z 6MT Sport Gun Metallic \| ARC \| CJM \| Ecutek \| FI \| Fujimura \| R2C \| SPL \| Stillen \| TWM \| Z1 \| ZSpeed \|

02-18-2013, 02:21 AM	#1364 (permalink)
XwChriswX WFLYIDNNE Join Date: Jul 2009 Location: In The Fastlane Posts: 50,648 Drives: 02 GDB WRX Rep Power: 452	Remind me tomorrow and I'll snap those pics for you. __________________ Bonnie - Stage 2, Audio build coming this fall! R.I.P. Abby 3/29/10 - 3/30/14

02-18-2013, 02:22 AM	#1365 (permalink)
JARblue A True Z Fanatic Join Date: Mar 2011 Location: Austin, TX Age: 44 Posts: 36,450 Drives: 11 Z34, 98 E36 M3 Rep Power: 2684440	__________________ 2011 370Z 6MT Sport Gun Metallic \| ARC \| CJM \| Ecutek \| FI \| Fujimura \| R2C \| SPL \| Stillen \| TWM \| Z1 \| ZSpeed \|

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
The New "What did you do with your Z today" (with off topic replies) III	happytheman	The Lounge (Off Topic)	9956	02-10-2013 03:13 PM
The New "What did you do with your Z today" (with off topic replies) II	happytheman	The Lounge (Off Topic)	10004	12-24-2012 08:31 PM
The New "What did you do with your Z today" (with off topic replies)	happytheman	The Lounge (Off Topic)	10265	11-01-2012 12:15 AM
We learned a valuable lesson about the "VDC OFF" button today thanks to b1ades	birdmanx1	Mid-Atlantic Region	167	09-01-2011 10:50 AM
got to autocross a couple different"high end" cars today	MC	Other Vehicles	15	06-13-2009 08:48 PM