The New "What did you do with your Z today" (with off topic replies) III

6MT · 01-19-2013, 10:56 AM

You suck, too!!

onzedge · 01-19-2013, 10:57 AM

Quote:

Originally Posted by 6MT

You suck, too!!

Pintsize725 · 01-19-2013, 10:57 AM

Quote:

Originally Posted by alcheng

Morning~~~~ Tracie honey~~~

Hello dear!

About to hit the road for some vroom vroom action. Most likely I'll be driving like a grandma though.

GaleForce · 01-19-2013, 11:00 AM

Quote:

Originally Posted by Davey

Waiting for the coffee to brew. I pretty much filled the dumpster yesterday... It was like a large-scale version of real life Tetris. But I managed to fit everything in there.

Unfortunately I found more problems. The basement was partially finished at one point (probably without a permit or any consideration of building code, because someone was an idiot) and they framed and paneled/drywalled the stairs.

Well the drywall was water-damaged and the paneling was a bit rotten and unfortunately was concealing some rot in the staircase itself, so now it looks like I need to have someone replace the last 6" or so of the stair case and a couple of the steps.

Today I'm going to rip out some more ceiling. I hope I don't find any more wire-nutted Romex encased in the ceiling. These dummies put in an interlocking ceiling on the floor joists and have wire running in it that isn't in conduits, circuits patched in with wire nuts/not in an electrical box...

Yikes! Sounds like it is a good thing that you're pulling things apart. Now you can fix them properly and have some peace of mind

GaleForce · 01-19-2013, 11:01 AM

Quote:

Originally Posted by Pintsize725

I'll get one in the mail on Monday for you.

Morning all.

Quote:

Originally Posted by ZMan8

Morning all

Sent from my SAMSUNG-SGH-I747 using Tapatalk 2

Good morning Ms.Pint and Zman

alcheng · 01-19-2013, 11:02 AM

Quote:

Originally Posted by 6MT

You suck! Minus 15 here.... falling by the hour.... going down to minus 27 later today... snow starting.... expecting a couple of inches.

Yes.... you suck!

And I bet you won't mind moving to here and be one of the suckers too, eh..??

Pintsize725 · 01-19-2013, 11:02 AM

Quote:

Originally Posted by GaleForce

Good morning Ms.Pint and Zman

Hello Gale! Any updated pics?

6MT · 01-19-2013, 11:04 AM

Quote:

Originally Posted by alcheng

And I bet you won't mind moving to here and be one of the suckers too, eh..??

No, I have no interest in living in the center of the known universe.

GaleForce · 01-19-2013, 11:05 AM

Quote:

Originally Posted by alcheng

Mr.GaleForce... more Z-assembly today??

Gosh... I am

when reading it, can't imagine how does it look like in real...

Good Luck on the process..!!!

(And thanks for the rep.. return to come tomorrow about 850am

)

Morning~~~~ Tracie honey~~~

Morning Rafael...

Sup ZMan8...??

Morning Everyone..!!!!

Nice and Warm in Toronto..

I hope to get out to the garage, but I'm looking after the little guy, then scoring some imaginary brownie points by cleaning the house before Mrs.Force gets home from work.

But it is so mild outside that it would be a very good time to work on my full size 3D puzzle. Hmmm... Imaginary brownie points, or working on the car....

JARblue · 01-19-2013, 11:05 AM

Good Saturday everyone

I am just swimming with ideas lately. I think I figured out that I can use pretty much any spray paint I want to to the strut tower brace as long as I use it sandwiched between Dupli-Color's Engine Enamel primer and clear. Ms. BC, I suspect if you took it to a specialty shop, they could do what ever you want, but I'm looking for a DIY solution. Dupli-Color has other options as well with a variety of paints that withstand temps up to 500F (or least intermittently - I think only the caliper paint resists continually).

Quote:

Originally Posted by Davey

Waiting for the coffee to brew. I pretty much filled the dumpster yesterday... It was like a large-scale version of real life Tetris. But I managed to fit everything in there.

Unfortunately I found more problems. The basement was partially finished at one point (probably without a permit or any consideration of building code, because someone was an idiot) and they framed and paneled/drywalled the stairs.

Well the drywall was water-damaged and the paneling was a bit rotten and unfortunately was concealing some rot in the staircase itself, so now it looks like I need to have someone replace the last 6" or so of the stair case and a couple of the steps.

Today I'm going to rip out some more ceiling. I hope I don't find any more wire-nutted Romex encased in the ceiling. These dummies put in an interlocking ceiling on the floor joists and have wire running in it that isn't in conduits, circuits patched in with wire nuts/not in an electrical box...

It is certainly crazy what some people consider acceptable construction

Electrical and structural problems can be extremely serious matters and should be corrected without delay. I hope everything works out with your renovations. Just don't think about the problems - end result, end result, end result

JARblue · 01-19-2013, 11:06 AM

Quote:

Originally Posted by GaleForce

I hope to get out to the garage, but I'm looking after the little guy, then scoring some imaginary brownie points by cleaning the house before Mrs.Force gets home from work.

But it is so mild outside that it would be a very good time to work on my full size 3D puzzle. Hmmm... Imaginary brownie points, or working on the car....

Depends on what those imaginary brownie points get you in the real world

GaleForce · 01-19-2013, 11:09 AM

Quote:

Originally Posted by Pintsize725

Hello Gale! Any updated pics?

Nothing major. I have video of the optional opening and closing sequence for the Defi gauges. I also have a video that shows the red/amber colour.

I can take a picture of some rolled up silicone vacuum hose or take a screen shot of an Uprev download.

Pintsize725 · 01-19-2013, 11:11 AM

Quote:

Originally Posted by GaleForce

Nothing major. I have video of the optional opening and closing sequence for the Defi gauges. I also have a video that shows the red/amber colour.

I can take a picture of some rolled up silicone vacuum hose or take a screen shot of an Uprev download.

I like as$ shots still.

ZMan8 · 01-19-2013, 11:15 AM

Quote:

Originally Posted by alcheng

Sup ZMan8...??

Morning Everyone..!!!!

Nice and Warm in Toronto..

slight headache...

too many drinks I guess

GaleForce · 01-19-2013, 11:16 AM

Quote:

Originally Posted by Pintsize725

I like as$ shots still.

Mine is dragging on the garage floor right now

01-19-2013, 10:56 AM	#5476 (permalink)
6MT A True Z Fanatic Join Date: May 2009 Location: ITU Zone 2 Posts: 22,459 Drives: Reliant Robin Rep Power: 1790	You suck, too!! partsguy likes this. __________________ Andrew 2009 370Z Sport/Touring 6MT sold 2013 Honda Civic Si coupe D/D

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
The New "What did you do with your Z today" (with off topic replies) II	happytheman	The Lounge (Off Topic)	10004	12-24-2012 07:31 PM
The New "What did you do with your Z today" (with off topic replies)	happytheman	The Lounge (Off Topic)	10265	10-31-2012 11:15 PM
We learned a valuable lesson about the "VDC OFF" button today thanks to b1ades	birdmanx1	Mid-Atlantic Region	167	09-01-2011 09:50 AM
Had my Z in for the "seat click" today...	KageZ	Nissan 370Z General Discussions	9	06-27-2009 07:49 AM
got to autocross a couple different"high end" cars today	MC	Other Vehicles	15	06-13-2009 07:48 PM