Anyone here into firearms?

VABAM · 11-30-2020, 12:24 PM

Quote:

Originally Posted by Ghostvette

.......Then I looked at reloading for it... step one: Cut down .308 brass to make case... Oh fvck no.... I need my .308 brass......

Ghostvette · 11-30-2020, 12:42 PM

Quote:

Originally Posted by VABAM

I didn't grow up with revolvers but I did shoot a few before I was old enough to buy my own. My .357 Mag Taurus 608 was my first revolver, third pistol overall. A Ruger Red Hawk Hunter in .44 Mag was next. My Ruger Bisley Black Hawk in 45 ACP/45 Colt is my only other revolver. Looking to get more. A 22lr revolver probably will be next.

For S&Gs I've been working on shooting and reloading my Black Hawk quickly so I can open carry it. The thought how butt hurt some tactical elitist would get about that makes me chuckle.

I've got a RedHawk in 41 Mag, I love that gun.

I sold my Security Six (dumb thing to do, but needed the $$), I've got a couple of 4" Stainless Security Sixes, had a Model 10 Smith heavy barrel I sold (got it in trade for a 69 Camaro. That Camaro was rough), and found a Ruger 3 screw Blackhawk that is has not been changed to a transfer bar system. It was in pieces, but everything was there. I had a gunsmith assemble it and verify that it shot properly. The bluing is worn but he said it would be worth more as is.

Hotrodz · 11-30-2020, 01:21 PM

Quote:

Originally Posted by Rusty

You can spend a fortune on good glass.

I remember the first time I looked through a pair of Zeiss binoculars and spotting scopes. I was blown away!

Sent from my SM-G965U using Tapatalk

VABAM · 11-30-2020, 01:23 PM

Quote:

Originally Posted by Ghostvette

I've got a RedHawk in 41 Mag, I love that gun.

I sold my Security Six (dumb thing to do, but needed the $$), I've got a couple of 4" Stainless Security Sixes, had a Model 10 Smith heavy barrel I sold (got it in trade for a 69 Camaro. That Camaro was rough), and found a Ruger 3 screw Blackhawk that is has not been changed to a transfer bar system. It was in pieces, but everything was there. I had a gunsmith assemble it and verify that it shot properly. The bluing is worn but he said it would be worth more as is.

I've only sold one gun ever and that was a first gen Walther P99 with a OD green frame. Wished I had held on to that one.

That 3 screw BlackHawk was a nice find. Definitely something to hold onto and not mess with. When I was looking for a BlackHawk I read up on all that. I probably buy another SA revolver at some point. Most likely another Ruger Bisley. I really like how the Ruger Bisley grip feels and looks.

Ghostvette · 11-30-2020, 01:28 PM

Quote:

Originally Posted by VABAM

I've only sold one gun ever and that was a first gen Walther P99 with a OD green frame. Wished I had held on to that one.

That 3 screw BlackHawk was a nice find. Definitely something to hold onto and not mess with. When I was looking for a BlackHawk I read up on all that. I probably buy another SA revolver at some point. Most likely another Ruger Bisley. I really like how the Ruger Bisley grip feels and looks.

The Bisley grip is similar to the Colt SAA grips, same principle. If only the SAA's weren't so damn expensive....

The difference in price between the SAA and the Bisley makes the Bisley attractive.

Hotrodz · 11-30-2020, 01:28 PM

Guns are like gold...you should never sell them. Ask me how I know!

Sent from my SM-G965U using Tapatalk

VABAM · 11-30-2020, 01:30 PM

Quote:

Originally Posted by Hotrodz

I remember the first time I looked through a pair of Zeiss binoculars and spotting scopes. I was blown away!

Sent from my SM-G965U using Tapatalk

Good glass ain't cheap. BUT, I will say this, the budget options are getting a lot better. Especially in the past few years.

VABAM · 11-30-2020, 01:37 PM

Quote:

Originally Posted by Hotrodz

Guns are like gold...you should never sell them. Ask me how I know!

Sent from my SM-G965U using Tapatalk

Selling that P99 was such a mistake.

VABAM · 11-30-2020, 02:04 PM

Quote:

Originally Posted by Ghostvette

The Bisley grip is similar to the Colt SAA grips, same principle. If only the SAA's weren't so damn expensive....

The difference in price between the SAA and the Bisley makes the Bisley attractive.

I thought the current Ruger BlackHawk grips (and frames) were bigger in general than a Colt SAA. The Super and Bisley BlackHawk being even bigger. It was also my understanding that the current Ruger Vaquero was the closest in size to a Colt SAA.

Before I bought my Bisley I went to a couple of gun shows and tried the grips of every single action I could find. The Ruger Bisley definitely felt bigger and my pinky finger didn't feel like it was falling of the end of the grip.

Ghostvette · 11-30-2020, 02:44 PM

Quote:

Originally Posted by VABAM

I thought the current Ruger BlackHawk grips (and frames) were bigger in general than a Colt SAA. The Super and Bisley BlackHawk being even bigger. It was also my understanding that the current Ruger Vaquero was the closest in size to a Colt SAA.

Before I bought my Bisley I went to a couple of gun shows and tried the grips of every single action I could find. The Ruger Bisley definitely felt bigger and my pinky finger didn't feel like it was falling of the end of the grip.

I don't know about the current ones, I just remember when the Bisley first came out, the grips felt the same to me as the SAA. Maybe Ruger has made them a little larger over the years. Who knows. I liked the way the revolver rotated up in my hand, making it a lot easier to thumb the hammer back. I didn't have to shuffle my grip like on some other revolvers.

VABAM · 11-30-2020, 04:18 PM

Quote:

Originally Posted by Ghostvette

I don't know about the current ones, I just remember when the Bisley first came out, the grips felt the same to me as the SAA. Maybe Ruger has made them a little larger over the years. Who knows. I liked the way the revolver rotated up in my hand, making it a lot easier to thumb the hammer back. I didn't have to shuffle my grip like on some other revolvers.

Like you I like how it is easier to thumb back the hammer on the Bisleys. Especially when shooting one handed. Part of it has to do with the "Bisley" hammer that come with the Bisley models. Also felt recoil feels less with Bisleys IMO.

I guess we were both wrong. GunBlast has a whole article devoted to Ruger SA revolver frames/grips.

GunBlast.com Ruger SA GripFrames

Ruger's XR3 grip frame is the same size as the Colt SAA.

VABAM · 11-30-2020, 05:12 PM

Other

recall.
This time from Sig.
Sig is recalling the CROSS Rifle.
https://www.sigsauer.com/crossrecall

Nutnfancy found the issue and reported it to SIG. TGC talked about it to day. The segment about what is happening starts at the 2:48 mark.

Rusty · 12-05-2020, 06:21 AM

Been messing around with the new rifle. The Timney trigger, hand grip, and magazine release extension came in today. So I installed that stuff. The trigger is a 2 stage. The 1st stage is set at 8oz, the 2nd stage breaks at 1lb. When you squeeze the trigger, it's like breaking a glass rod. Nice and crisp.

Waiting on the scope rings, reloading dies, and the solvent trap can.

jwick · 12-05-2020, 10:02 AM

Quote:

Originally Posted by Rusty

Been messing around with the new rifle. The Timney trigger, hand grip, and magazine release extension came in today. So I installed that stuff. The trigger is a 2 stage. The 1st stage is set at 8oz, the 2nd stage breaks at 1lb. When you squeeze the trigger, it's like breaking a glass rod. Nice and crisp.

Waiting on the scope rings, reloading dies, and the solvent trap can.

I’ve been considering a Timney for a while. Just can’t decide if I like a two stage or not.

ZeeingAround · 12-05-2020, 04:58 PM

I just ordered a CMT trigger to try. Single stage. BF deal. For my AR build.
In other news, my Uncle on my wife's side has an unfired Ruger SR1911 For sale. $600. Seems fair , but i have never owned or fired a Ruger 1911. Anyone here have one?

11-30-2020, 01:28 PM	#5691 (permalink)
Hotrodz A True Z Fanatic Join Date: Aug 2012 Location: NW, AZ Posts: 9,330 Drives: 10 Nissan 370z Nismo Rep Power: 2684385	Guns are like gold...you should never sell them. Ask me how I know! Sent from my SM-G965U using Tapatalk VABAM, Rusty and Ghostvette like this. __________________ *Fast Intentions TT Installed and Tuned by Seb at SpecialtyZ 610whp 560tq:\|Fast Intentions 3" TT-TDX*\|SpecialtyZ/Fast Intentions 72 Row Oil Cooler\|SZ 6 Puck Clutch & Flywheel\|3GsCustoms\|Z1\|Wavetrac\|Hotchkis\|Whiteline \|Blitz\|Fortune Auto 500\|Fujimura\|SPL\|H&R\|TK\|TWM\|RPM Rollbar\|Sparco\|Next Level Performance\|TrackSpec\|AeroFlow Dynamics\|Pioneer\|

11-30-2020, 05:12 PM	#5697 (permalink)
VABAM A True Z Fanatic Join Date: May 2010 Location: No Where VA Posts: 4,003 Drives: with VDC off. Rep Power: 196	Other recall. This time from Sig. Sig is recalling the CROSS Rifle. https://www.sigsauer.com/crossrecall Nutnfancy found the issue and reported it to SIG. TGC talked about it to day. The segment about what is happening starts at the 2:48 mark. Rusty and Ghostvette like this. __________________ 2009 370Z Touring W/SP Last edited by VABAM; 11-30-2020 at 05:16 PM.

12-05-2020, 06:21 AM	#5698 (permalink)
Rusty Ronin Samurai - Assassin Join Date: Dec 2011 Location: Fayettenam,Pennsyltucky Age: 68 Posts: 35,190 Drives: 2011 Nismo GM 6M Rep Power: 2684437	Been messing around with the new rifle. The Timney trigger, hand grip, and magazine release extension came in today. So I installed that stuff. The trigger is a 2 stage. The 1st stage is set at 8oz, the 2nd stage breaks at 1lb. When you squeeze the trigger, it's like breaking a glass rod. Nice and crisp. Waiting on the scope rings, reloading dies, and the solvent trap can. VABAM and Ghostvette like this. __________________ 浪人 - 殺し屋 "The Difficult Anytime, The Impossible By Appointment Only" http://www.the370z.com/members-370z-...o-journal.html

12-05-2020, 04:58 PM	#5700 (permalink)
ZeeingAround A True Z Fanatic Join Date: Dec 2010 Location: Michigan Posts: 6,365 Drives: 3500 NVP 370Z-sold! Rep Power: 86623	I just ordered a CMT trigger to try. Single stage. BF deal. For my AR build. In other news, my Uncle on my wife's side has an unfired Ruger SR1911 For sale. $600. Seems fair , but i have never owned or fired a Ruger 1911. Anyone here have one? VABAM likes this. __________________ Get some roosters for eggs and Bulls for milk . Then you will see that gender matters. Especially at milking time.