Anyone here into firearms?

DeliriousClam · 04-07-2018, 10:53 AM

parts for the Sig P320 build have started arriving. the Jig is on back order so I'm waiting on that then I just need the magazine and the barrel/slide/spring.

ZeeingAround · 04-19-2018, 01:16 PM

The most satisfying video of the day. I want to tweet this one to David Hogg.
https://www.youtube.com/watch?time_c...&v=N60WtGC4ejo

Rusty · 04-19-2018, 03:47 PM

Quote:

Originally Posted by ZeeingAround

The most satisfying video of the day. I want to tweet this one to David Hogg.
https://www.youtube.com/watch?time_c...&v=N60WtGC4ejo

He should be in the video............................................. ....in the hummer.

Rusty · 04-19-2018, 03:56 PM

Quote:

Originally Posted by Rusty

Just put in for my NM elk hunt for next fall.

Have to wait for the draw next month to see if I get a license. Going to be using my Rem 700, 7mm Rem Mag with a 168 Berger bullet. Have to work on that load. Haven't used it before.

Well

..............I got the results from the elk hunting license drawing. NM gave out 58,000 license. 208,000 applied for those license. And I was not one of the 58,000 lucky ones.

Bright side. The wife is feeling bad for me. Told me I can go out and buy a new rifle.

Decisions, decisions. I want a 6.5 Creed or a 338 Lapua Mag.

synolimit · 04-20-2018, 05:07 AM

Picked up a gen 5 19x to use in a micro roni. Expensive but at least it came with 1-17, 2-19 and nightsites. I wanted the color too and the 4 different backstraps is cool. I havent bought a glock in 14 years so its kinda old familiar coming back.

VABAM · 04-20-2018, 12:10 PM

Quote:

Originally Posted by Rusty

Well

..............I got the results from the elk hunting license drawing. NM gave out 58,000 license. 208,000 applied for those license. And I was not one of the 58,000 lucky ones.

Bright side. The wife is feeling bad for me. Told me I can go out and buy a new rifle.

Decisions, decisions. I want a 6.5 Creed or a 338 Lapua Mag.

I vote for a 6.5 Creed unless you have some where you can stretch the legs on a cartridge like the 338 Lapua.

VABAM · 04-20-2018, 01:00 PM

Quote:

Originally Posted by synolimit

Picked up a gen 5 19x to use in a micro roni. Expensive but at least it came with 1-17, 2-19 and nightsites. I wanted the color too and the 4 different backstraps is cool. I havent bought a glock in 14 years so its kinda old familiar coming back.

Nice gun, but I don't see the point of the 19X. If the standard 19 frame was way shorter than the 17 to the point it was uncomfortable for people with large hands I might understand it. I have a gen 4 19 an the length of the grip is just fine for my large hands. I actually find the 19 more comfortable than the 17. If they had made a 17X, a 17 slide with 19 frame they would sell an *** ton of them. I understand why they are selling them, to make up for loosing to Sig on the MHS, but this was a bad move by them IMO. Especially considering it isn't 100% compatible with all Glock mags.

Chuck33079 · 04-20-2018, 01:00 PM

Quote:

Originally Posted by synolimit

Picked up a gen 5 19x to use in a micro roni. Expensive but at least it came with 1-17, 2-19 and nightsites. I wanted the color too and the 4 different backstraps is cool. I havent bought a glock in 14 years so its kinda old familiar coming back.

You have to buy Glocks? Mine seem to multiply. I bought two, now I seem to have a safe full of them.

2011 Nismo#91 · 04-20-2018, 02:47 PM

Small new addition

S&W 460 14"

Ghostvette · 04-20-2018, 02:51 PM

Quote:

Originally Posted by Chuck33079

You have to buy Glocks? Mine seem to multiply. I bought two, now I seem to have a safe full of them.

Now if I could only get my open bolt Ingram to do the same.......

VABAM · 04-20-2018, 03:22 PM

Quote:

Originally Posted by 2011 Nismo#91

Small new addition

S&W 460 14"

What large animal you going to assassinate with that!

JARblue · 04-20-2018, 03:32 PM

Elk

DeliriousClam · 04-20-2018, 04:35 PM

Quote:

Originally Posted by 2011 Nismo#91

Small new addition

S&W 460 14"

What in the ****?

Rusty · 04-20-2018, 05:56 PM

Quote:

Originally Posted by 2011 Nismo#91

Small new addition

S&W 460 14"

Rusty · 04-20-2018, 05:57 PM

Quote:

Originally Posted by Ghostvette

Now if I could only get my open bolt Ingram to do the same.......

Me too.

04-07-2018, 10:53 AM	#5131 (permalink)
DeliriousClam A True Z Fanatic Join Date: May 2015 Location: NJ Age: 31 Posts: 3,758 Drives: 12 Base Sport Rep Power: 54272	parts for the Sig P320 build have started arriving. the Jig is on back order so I'm waiting on that then I just need the magazine and the barrel/slide/spring. VABAM and Ghostvette like this. __________________ Stillen, AAM, Shine Auto, Fujimora, Swift, EVO-R, Carbon Fiber Element, Nitrous Outlet MECP Advanced: CEA26671 Most of what I post here are artistic works of fiction and falsehood. Only a fool would take anything I post here as fact.

04-19-2018, 01:16 PM	#5132 (permalink)
ZeeingAround A True Z Fanatic Join Date: Dec 2010 Location: Michigan Posts: 6,365 Drives: 3500 NVP 370Z-sold! Rep Power: 86623	The most satisfying video of the day. I want to tweet this one to David Hogg. https://www.youtube.com/watch?time_c...&v=N60WtGC4ejo __________________ Get some roosters for eggs and Bulls for milk . Then you will see that gender matters. Especially at milking time.

04-20-2018, 02:47 PM	#5139 (permalink)
2011 Nismo#91 A True Z Fanatic Join Date: Mar 2011 Location: NJ Posts: 2,401 Drives: slowly Rep Power: 40569	Small new addition S&W 460 14" jwick likes this. __________________ GTR TT 493Whp/431lbft, Ecutek, Southbend 6puck,Quaife, RPM RollBar 4Point, R888R, JRZ RSPro F(10R/10C) R(10R/6C) 1000f500r inlbs+150inlbs Tender, SPL everywhere.Full Specs

04-20-2018, 03:32 PM	#5142 (permalink)
JARblue A True Z Fanatic Join Date: Mar 2011 Location: Austin, TX Age: 43 Posts: 36,450 Drives: 11 Z34, 98 E36 M3 Rep Power: 2684440	Elk VABAM likes this. __________________ 2011 370Z 6MT Sport Gun Metallic \| ARC \| CJM \| Ecutek \| FI \| Fujimura \| R2C \| SPL \| Stillen \| TWM \| Z1 \| ZSpeed \|