Anyone here into firearms?

BoneZ · 07-26-2016, 12:12 PM

Quote:

Originally Posted by Chuck33079

Then try out an XD or M&P. Functionally pretty much the same as the Glock, but the designers actually took the time to make sure it felt good in your hand.

Or just buy a 1911. The answer is usually 1911.

Depends on you hand. The G19 fit me like a glove. Important point being, try several to find the one that's best for you.

Chuck33079 · 07-26-2016, 12:15 PM

Quote:

Originally Posted by BoneZ

Depends on you hand. The G19 fit me like a glove. Important point being, try several to find the one that's best for you.

Go rent a bunch at the range and see which fits you best. I already had multiple Glocks before I bought my M&P subcompact, but had I tested it before all the Glocks I would have gone that direction.

Ghostvette · 07-26-2016, 12:52 PM

Quote:

Originally Posted by BoneZ

Depends on you hand. The G19 fit me like a glove. Important point being, try several to find the one that's best for you.

Best advice

Rusty · 07-26-2016, 09:29 PM

With the S&W M&P full size. You get 3 different back straps you can change.

I've shot a lot of Glocks, thinking that I might get one. But in the end. I always end end with something else. Glocks for some reason, I can't get to like them. Just not my cup of tea. They are good pistols thou.

DeliriousClam · 07-26-2016, 11:21 PM

I remember when I was young there were a few referred to as "glocknades" Don't know how relevant that is still. Either way just don't like em. Once I get my permit, the local range is going to let me test a couple guns. (all 9mm for starting) Walther PPQ M2, Beretta M92 (I've had a love for them but have a feeling I'll be let down by it) Beretta PX4 Storm, Springfield XD and a few different M&P's. I want to take a look at H&K's lineup soon

Rusty · 07-26-2016, 11:45 PM

Have a 9mm Beretta 92 FS. Nice shooting gun. But the grip is on the large size if you have small mitts.

On Glocks. If you reload. You might not be able to reload because of a thing called the Glock bulge. Anyone here experienced this? Have a couple of friends who have.

https://www.google.com/webhp?sourcei...=glock%20bulge

VABAM · 07-27-2016, 12:23 AM

Quote:

Originally Posted by Rusty

Have a 9mm Beretta 92 FS. Nice shooting gun. But the grip is on the large size if you have small mitts.

On Glocks. If you reload. You might not be able to reload because of a thing called the Glock bulge. Anyone here experienced this? Have a couple of friends who have.

https://www.google.com/webhp?sourcei...=glock%20bulge

The Berreta 92 is a great gun. Some of the newer variants have thinner grips. Especially the the latest M9A3 which has a thinner grip and uses wrap around grip panels to change the thickness of the grip.

IIRC Glock bulge has more to do with the .40 S&W (and 10mm) models due to the higher pressures those rounds have. I've heard that 9mm and .45 ACP (and GAP) models don't really have that issue but it is possible when shooting very hot loads. It comes from the chamber not being fully supported. There are some reloading dies out there that will fix cases with Glock bulge. For 9mm I wouldn't worry about it and IMO reloading 9mm is not worth it due to very cheap bulk ammo out there.

Rusty · 07-27-2016, 12:53 AM

I seen the bulge in 9mm on both Glock and S&W M&P Shields. My wife's Shield doesn't like +Plus loads.

I reload everything I shoot. Cast my own bullets for pistols for target shooting. Just got done reloading 1200 rounds of 38 spl for my brother inlaw. Have 800 rounds of 9mm waiting to be reloaded. And 1800 rounds of 40 S&W waiting too.

Ghostvette · 07-27-2016, 09:56 AM

Quote:

Originally Posted by Rusty

I seen the bulge in 9mm on both Glock and S&W M&P Shields. My wife's Shield doesn't like +Plus loads.

I reload everything I shoot. Cast my own bullets for pistols for target shooting. Just got done reloading 1200 rounds of 38 spl for my brother inlaw. Have 800 rounds of 9mm waiting to be reloaded. And 1800 rounds of 40 S&W waiting too.

What press do you use? I'm sure you mentioned it way back when, but being old and senile, I forgot...

I use a Hornady LNL progressive, but I still have a couple of RCBS Rockchuckers hanging around.

UNKNOWN_370 · 07-27-2016, 11:22 AM

I'm also an owner of a Beretta 92fs Italy Inox.

I just bought two great pistols. Before I say what they are.... I own 5 steel and aluminum. Pistols. I hate polymer guns. Particularly striker fired pistols. I'm old school in that sense.

I'm not a polymer pistol fanboy of any type. When I bought the Walther PPQ, I thought it was the end all be all to my polymer pistol purchase until I shot a Sig P320 compact and my mouth just opened at the ridiculous accuracy of this pistol from first to last shot. Slow fire or rapid fire. The Sig P320 was AMAZING. Sold the PPQ got the P320.

On the side note I bought the best brand new gun in the universe for $209.00 The Taurus PT111 G2. Wow can that thing perform for its price point. I put it up against the Smith & Wesson Shield and Glock 26. I just couldn't justify buying anything else considering all the guns are half plastic.
The Taurus with a 3.2 inch barrel shoots a 1inch wider group than my Beretta and CZ 75B. It's just amazing. I have one mag with hornady 115 grcritical defense, another mag with Winchester ranger T 124+p.
Both I range tested and both performed phenomenal. Just thought I'd throw this in.

DeliriousClam · 07-27-2016, 11:47 AM

Honestly I'd love to get a .38 revolver instead but revolvers are expensive as **** from what I've seen.

DeliriousClam · 07-27-2016, 11:56 AM

anyone have any experience with Taurus revolvers? I'm looking at one of their .357 magnums right now

Gerg · 07-27-2016, 12:09 PM

Quote:

Originally Posted by DeliriousClam

anyone have any experience with Taurus revolvers? I'm looking at one of their .357 magnums right now

My wife has a snub nose Taurus .38 special that works like a dream. It's super light and great for carrying... but the .38 doesn't punch like a .357 would.

I have a Colt Trooper (.357)... I wouldn't carry it due to the size and weight, but it's a fantastic shooter and didn't break the bank. Taurus has come a long way with their quality over the years, but If I had to pick between a Colt and A Taurus when it comes to revolvers, I'd go with the Colt.

Just my $0.02.

BoneZ · 07-27-2016, 12:11 PM

I had a Taurus .38 Special 4". It was pretty nice.

DeliriousClam · 07-27-2016, 12:12 PM

Quote:

Originally Posted by Gerg

My wife has a snub nose Taurus .38 special that works like a dream. It's super light and great for carrying... but the .38 doesn't punch like a .357 would.

I have a Colt Trooper (.357)... I wouldn't carry it due to the size and weight, but it's a fantastic shooter and didn't break the bank. Taurus has come a long way with their quality over the years, but If I had to pick between a Colt and A Taurus when it comes to revolvers, I'd go with the Colt.

Just my $0.02.

Carrying doesn't matter to me because New Jersey. It'll see mainly range time. I'm just looking for something that's not going to **** up. I've heard mixed things about Taurus but this .357 is so tempting

07-26-2016, 09:29 PM	#4354 (permalink)
Rusty Ronin Samurai - Assassin Join Date: Dec 2011 Location: Fayettenam,Pennsyltucky Age: 68 Posts: 35,190 Drives: 2011 Nismo GM 6M Rep Power: 2684437	With the S&W M&P full size. You get 3 different back straps you can change. I've shot a lot of Glocks, thinking that I might get one. But in the end. I always end end with something else. Glocks for some reason, I can't get to like them. Just not my cup of tea. They are good pistols thou. __________________ 浪人 - 殺し屋 "The Difficult Anytime, The Impossible By Appointment Only" http://www.the370z.com/members-370z-...o-journal.html

07-26-2016, 11:21 PM	#4355 (permalink)
DeliriousClam A True Z Fanatic Join Date: May 2015 Location: NJ Age: 31 Posts: 3,758 Drives: 12 Base Sport Rep Power: 54272	I remember when I was young there were a few referred to as "glocknades" Don't know how relevant that is still. Either way just don't like em. Once I get my permit, the local range is going to let me test a couple guns. (all 9mm for starting) Walther PPQ M2, Beretta M92 (I've had a love for them but have a feeling I'll be let down by it) Beretta PX4 Storm, Springfield XD and a few different M&P's. I want to take a look at H&K's lineup soon __________________ Stillen, AAM, Shine Auto, Fujimora, Swift, EVO-R, Carbon Fiber Element, Nitrous Outlet MECP Advanced: CEA26671 Most of what I post here are artistic works of fiction and falsehood. Only a fool would take anything I post here as fact.

07-26-2016, 11:45 PM	#4356 (permalink)
Rusty Ronin Samurai - Assassin Join Date: Dec 2011 Location: Fayettenam,Pennsyltucky Age: 68 Posts: 35,190 Drives: 2011 Nismo GM 6M Rep Power: 2684437	Have a 9mm Beretta 92 FS. Nice shooting gun. But the grip is on the large size if you have small mitts. On Glocks. If you reload. You might not be able to reload because of a thing called the Glock bulge. Anyone here experienced this? Have a couple of friends who have. https://www.google.com/webhp?sourcei...=glock%20bulge UNKNOWN_370 likes this. __________________ 浪人 - 殺し屋 "The Difficult Anytime, The Impossible By Appointment Only" http://www.the370z.com/members-370z-...o-journal.html

07-27-2016, 12:53 AM	#4358 (permalink)
Rusty Ronin Samurai - Assassin Join Date: Dec 2011 Location: Fayettenam,Pennsyltucky Age: 68 Posts: 35,190 Drives: 2011 Nismo GM 6M Rep Power: 2684437	I seen the bulge in 9mm on both Glock and S&W M&P Shields. My wife's Shield doesn't like +Plus loads. I reload everything I shoot. Cast my own bullets for pistols for target shooting. Just got done reloading 1200 rounds of 38 spl for my brother inlaw. Have 800 rounds of 9mm waiting to be reloaded. And 1800 rounds of 40 S&W waiting too. Ghostvette likes this. __________________ 浪人 - 殺し屋 "The Difficult Anytime, The Impossible By Appointment Only" http://www.the370z.com/members-370z-...o-journal.html

07-27-2016, 11:22 AM	#4360 (permalink)
UNKNOWN_370 A True Z Fanatic Join Date: Jul 2009 Location: ny'r livn in tx Posts: 8,687 Drives: well over 130m.p.h. Rep Power: 14858	I'm also an owner of a Beretta 92fs Italy Inox. I just bought two great pistols. Before I say what they are.... I own 5 steel and aluminum. Pistols. I hate polymer guns. Particularly striker fired pistols. I'm old school in that sense. I'm not a polymer pistol fanboy of any type. When I bought the Walther PPQ, I thought it was the end all be all to my polymer pistol purchase until I shot a Sig P320 compact and my mouth just opened at the ridiculous accuracy of this pistol from first to last shot. Slow fire or rapid fire. The Sig P320 was AMAZING. Sold the PPQ got the P320. On the side note I bought the best brand new gun in the universe for $209.00 The Taurus PT111 G2. Wow can that thing perform for its price point. I put it up against the Smith & Wesson Shield and Glock 26. I just couldn't justify buying anything else considering all the guns are half plastic. The Taurus with a 3.2 inch barrel shoots a 1inch wider group than my Beretta and CZ 75B. It's just amazing. I have one mag with hornady 115 grcritical defense, another mag with Winchester ranger T 124+p. Both I range tested and both performed phenomenal. Just thought I'd throw this in. __________________ Favorite Quote. "I'm not gonna kill you... I'm just gonna Bash Your Face In" Jack Nicholson-"The Shining". 1980 Last edited by UNKNOWN_370; 07-27-2016 at 11:24 AM.

07-27-2016, 11:47 AM	#4361 (permalink)
DeliriousClam A True Z Fanatic Join Date: May 2015 Location: NJ Age: 31 Posts: 3,758 Drives: 12 Base Sport Rep Power: 54272	Honestly I'd love to get a .38 revolver instead but revolvers are expensive as **** from what I've seen. __________________ Stillen, AAM, Shine Auto, Fujimora, Swift, EVO-R, Carbon Fiber Element, Nitrous Outlet MECP Advanced: CEA26671 Most of what I post here are artistic works of fiction and falsehood. Only a fool would take anything I post here as fact.

07-27-2016, 11:56 AM	#4362 (permalink)
DeliriousClam A True Z Fanatic Join Date: May 2015 Location: NJ Age: 31 Posts: 3,758 Drives: 12 Base Sport Rep Power: 54272	anyone have any experience with Taurus revolvers? I'm looking at one of their .357 magnums right now __________________ Stillen, AAM, Shine Auto, Fujimora, Swift, EVO-R, Carbon Fiber Element, Nitrous Outlet MECP Advanced: CEA26671 Most of what I post here are artistic works of fiction and falsehood. Only a fool would take anything I post here as fact.

07-27-2016, 12:11 PM	#4364 (permalink)
BoneZ A True Z Fanatic Join Date: May 2015 Location: Atlanta, GA Age: 52 Posts: 9,299 Drives: 2012 Blue BallZ Rep Power: 2684382	I had a Taurus .38 Special 4". It was pretty nice. __________________ *“Happiness is having a large, loving, caring, close-knit family in another city.”*-George Burns