Anyone here into firearms?

Rusty · 08-03-2018, 11:56 AM

Quote:

Originally Posted by Ghostvette

I think I paid $350 for my M10 in 9mm. Now I'm really upset....

I traded mine years ago.....

Prices of the full auto's really shot up.

A Lightning Link (drop in auto sear) for an AR is $17,000.

It's just a piece of bent sheet metal.

Ghostvette · 08-03-2018, 01:13 PM

Quote:

Originally Posted by Rusty

Prices of the full auto's really shot up.

A Lightning Link (drop in auto sear) for an AR is $17,000.

It's just a piece of bent sheet metal.

You know a M10 can be made full auto with minor milling....

Rusty · 08-03-2018, 01:49 PM

Quote:

Originally Posted by Ghostvette

You know a M10 can be made full auto with minor milling....

Mine is full auto.

Ghostvette · 08-03-2018, 01:54 PM

Mine was the SA version and I found a couple of ways to make it full auto, one 'legally', one not so much...

Rusty · 08-03-2018, 03:47 PM

Quote:

Originally Posted by Ghostvette

Mine was the SA version and I found a couple of ways to make it full auto, one 'legally', one not so much...

Yeah, when reloading. Don't seat the primer all the way down. And install a weak firing pin spring. Let the firing pin bounce off of the high primer.

Yeahhhh, I tried that.

bunk · 08-03-2018, 05:15 PM

Quote:

Originally Posted by Rusty

Yeah, when reloading. Don't seat the primer all the way down. And install a weak firing pin spring. Let the firing pin bounce off of the high primer.

Yeahhhh, I tried that.

Would you do that with 223? Only handgun I reload is 45acp. 9mm is cheap enough to keep myself from the pain of reloading. Mostly 223 and 30-06

bunk · 08-03-2018, 05:17 PM

No failure to feed with a high primer?

Rusty · 08-03-2018, 05:51 PM

Quote:

Originally Posted by bunk

Would you do that with 223? Only handgun I reload is 45acp. 9mm is cheap enough to keep myself from the pain of reloading. Mostly 223 and 30-06

In my younger days. I did it to a Mini 14, and a 9mm pistol. Sometimes it would work, sometimes it wouldn't. Then I read about it. If the bolt is not fully closed. It will be a big problem in a short period of time..

I reload for just about everything and everyone.

bunk · 08-03-2018, 06:00 PM

Yeah, handloads are something I dont want to mess with. I saw a video of some clowns at in indoor range rapid firing an AR with handloads. The AR blew up in the guys face from bad loads! Of the many thousands of rounds Ive loaded, Ive only had maybe 2 Failure to feed on my 1911, but that was from the cheap 8rd mag. And a few failure to eject from my AR. *fingers crossed* (and intact) haha

Rusty · 08-03-2018, 06:16 PM

Quote:

Originally Posted by bunk

Yeah, handloads are something I dont want to mess with. I saw a video of some clowns at in indoor range rapid firing an AR with handloads. The AR blew up in the guys face from bad loads! Of the many thousands of rounds Ive loaded, Ive only had maybe 2 Failure to feed on my 1911, but that was from the cheap 8rd mag. And a few failure to eject from my AR. *fingers crossed* (and intact) haha

I've been reloading since 1978. The number of issues I had. I can count on one hand. I've had more issues with factory loads. Especially the the overseas stuff. Primers in backwards, bullets sitted too deep, or not enough, no powder, boxes marked wrong.

bunk · 08-03-2018, 06:22 PM

lol... Bad reloads during actual loading..thats a different story! I have a Lee Loadmaster and Ive lost count of how many thousands of bad primer loads that thing made. That press is so bad that I pretty much use it as a single stage. yea, i should get a dillon. those things are so smooth

Rusty · 08-03-2018, 06:39 PM

Quote:

Originally Posted by bunk

lol... Bad reloads during actual loading..thats a different story! I have a Lee Loadmaster and Ive lost count of how many thousands of bad primer loads that thing made. That press is so bad that I pretty much use it as a single stage. yea, i should get a dillon. those things are so smooth

If you are going progressive. The Dillion is the way to go.

Baronsmokes · 08-05-2018, 01:01 AM

Quote:

Originally Posted by Rusty

Prices of the full auto's really shot up.

A Lightning Link (drop in auto sear) for an AR is $17,000.

It's just a piece of bent sheet metal.

Crazy prices.
The BAR I made an offer on is well above 17K

bunk · 08-05-2018, 11:54 AM

Californias 9th circus court of appeals is upholding the bullet stamping law.. No new handguns in Ca that cannot microstamp the handguns s/n onto bullet casings..

Rusty · 08-05-2018, 01:46 PM

Quote:

Originally Posted by bunk

Californias 9th circus court of appeals is upholding the bullet stamping law.. No new handguns in Ca that cannot microstamp the handguns s/n onto bullet casings..

How is this going to work if you reload the same caliber for different guns. The casing would have so many different stampings that you couldn't read them.

And what about picking up some range brass?

08-03-2018, 01:54 PM	#5209 (permalink)
Ghostvette A True Z Fanatic Join Date: Aug 2013 Location: Shawnee KS Posts: 5,698 Drives: 15 Magma Red 6MT Rep Power: 2684377	Mine was the SA version and I found a couple of ways to make it full auto, one 'legally', one not so much... Rusty likes this. __________________ 2015 Magma Red 6MT Sport Tech/2012 Fairlady MB 6MT Base (RIP 08032018)https://www.nicoclub.com/FSM/370Z/Coupe/

08-03-2018, 05:17 PM	#5212 (permalink)
bunk A True Z Fanatic Join Date: Mar 2018 Location: Southern California Posts: 4,077 Drives: 2010 370z Roadster Rep Power: 2684369	No failure to feed with a high primer? __________________ -Drop in K&N Filter -Invidia Gemini CBE -Z1 Oil Cooler -Swift Springs - EcuTek -Forgestar F14 -SPL Camber Links -Akebono BBK Upgrade -Z1 Premium SS Lines -SPL Diff Bushings -SPL FUCAs - BellRaceworks Diff Brace

08-03-2018, 06:00 PM	#5214 (permalink)
bunk A True Z Fanatic Join Date: Mar 2018 Location: Southern California Posts: 4,077 Drives: 2010 370z Roadster Rep Power: 2684369	Yeah, handloads are something I dont want to mess with. I saw a video of some clowns at in indoor range rapid firing an AR with handloads. The AR blew up in the guys face from bad loads! Of the many thousands of rounds Ive loaded, Ive only had maybe 2 Failure to feed on my 1911, but that was from the cheap 8rd mag. And a few failure to eject from my AR. fingers crossed (and intact) haha __________________ -Drop in K&N Filter -Invidia Gemini CBE -Z1 Oil Cooler -Swift Springs - EcuTek -Forgestar F14 -SPL Camber Links -Akebono BBK Upgrade -Z1 Premium SS Lines -SPL Diff Bushings -SPL FUCAs - BellRaceworks Diff Brace

08-03-2018, 06:22 PM	#5216 (permalink)
bunk A True Z Fanatic Join Date: Mar 2018 Location: Southern California Posts: 4,077 Drives: 2010 370z Roadster Rep Power: 2684369	lol... Bad reloads during actual loading..thats a different story! I have a Lee Loadmaster and Ive lost count of how many thousands of bad primer loads that thing made. That press is so bad that I pretty much use it as a single stage. yea, i should get a dillon. those things are so smooth __________________ -Drop in K&N Filter -Invidia Gemini CBE -Z1 Oil Cooler -Swift Springs - EcuTek -Forgestar F14 -SPL Camber Links -Akebono BBK Upgrade -Z1 Premium SS Lines -SPL Diff Bushings -SPL FUCAs - BellRaceworks Diff Brace

08-05-2018, 11:54 AM	#5219 (permalink)
bunk A True Z Fanatic Join Date: Mar 2018 Location: Southern California Posts: 4,077 Drives: 2010 370z Roadster Rep Power: 2684369	Californias 9th circus court of appeals is upholding the bullet stamping law.. No new handguns in Ca that cannot microstamp the handguns s/n onto bullet casings.. __________________ -Drop in K&N Filter -Invidia Gemini CBE -Z1 Oil Cooler -Swift Springs - EcuTek -Forgestar F14 -SPL Camber Links -Akebono BBK Upgrade -Z1 Premium SS Lines -SPL Diff Bushings -SPL FUCAs - BellRaceworks Diff Brace