Good handguns

ImportConvert

How is it possible that my TRS was a lemon when it was hand-assembled? That kind of stuff just was overlooked as LB didn't care. It HAD TO have been seen. Pure junk.

Lemons happen far more often in the 1911 world than in the Glock world. I have yet to own a Glock that was a lemon. The only 2 1911's I owned were lemons. One was Wilson Combat's top model, the other was Les Baer's TRS. Neither were reliable. Neither were what I would consider well made, as the Baer had FTRB's well past the 500 round mark, and that is after I slurried the action with CLP and JB Bore-paste to try to loosen it up. The Wilson's rear-sight came loose twice, the ejecting shells chipped the Armor-tuff off down to the base parkerizing, and when they tuned it so it wouldn't do that, it wouldn't feed the last round from Wilson 47D's about 10% of the time.

Sorry, my Glock's have a great finish, the sights don't come off, and they don't jam all the time.

I used to be the biggest tuperware hater in town and loved the 1911 to death, but then I spent more on 1911's than I did on my daily driver, and they all just sucked, whereas my Glock experience has been boring. That is to say, it always hits right where I point it, never jams unless you seriously limp-wrist it, and in general, just does what it is supposed to do---accurately and reliably deliver the bullet where you want. Every time. All the time.

The ammo used in the LesBaer that caused FTRB's was anything I had, JHP's, 230gr American Eagle, shot pretty much anything on hand in it.

The Wilson kept choking on Ranger T-series 230gr. I was TRYING to make it 500 rounds with this to ensure it was reliable. I even sent it to Wilson to zero the weapon with and they pronounced that the round was reliable in the gun and saw no reason why it shouldn't be a good choice. It was not the nose that hung up but the case-rim binding between the extractor an breech-face. It was either that, or accept that I will have all my finish chipped off on the top of the slide on a $4400 pistol. no thanks. I picked "buy this junk back, please", and got my custom SIG (2X the capacity, shoots 1.17" 5-shot groups CTC at 25 yards with Gold Dots, and never jams). The trigger on it after Torie worked it over is about a 8/10 with the WIlson's trigger being a 10/10. Fit/finish on the Wilson was a big better, but both are "tight" (don't rattle when shaken HARD), and the QPQ finish on my SIG is far superior to the Armor-Tuff, which got it's first scratch down to the metal when the FFL dealer gently clipped the nylon cord in the trigger/gard with some scissors, lol. Horrible finish. Chipped/removed by ejected casings. Fail.

I just don't see ANY advantage to a 1911 over a SIG. Both are big chunks of solid steel (if that is what you want) for a range/bedside pistol.