The New “What did you do with your Z today” (with off topic replies)

eastwest2300 · 12-18-2023, 07:39 AM

Quote:

Originally Posted by danegrey

Crunch Time
7 days to Xmas
enjoy the day, and enjoy the Xmas shopping rush
Attachment 152807

7 days!

have a great day sir!

eastwest2300 · 12-18-2023, 07:39 AM

have a good day as well rusty

vtec to vvel · 12-18-2023, 09:10 PM

Finally have all the parts to replace the CSC/CMC, and I will be taking to a shop to get it replaced. My car can only make it a short distance (about 10 miles) before the clutch pedal goes soft and losing fluid in the reservoir.

Fever Racing is where I will most likely be going and spoke with the owner directly on separate occasions, with the last interaction somewhat putting me on edge. He is the one that recommended the ZSpeed kit, as he would not install the Z1 Kit. But what caught me off guard was he asked if I was planning on replacing the flywheel, to which I replied the kit I ordered came with it and he recommended leaving in the OEM flywheel while pairing with the clutch that came with the CMAK kit. He said something about the single mass FW from ZSpeed produces more noise and ruins the "engine harmonics".
After speaking with George at ZSpeed, he informed me that the clutch that comes with the CMAK kit that I ordered is not compatible with the OEM dual mass FW.

1. I'm wondering why Fever Racing that claims they have done many of these CMAK installs would tell me otherwise than what ZSpeed says. I'm pretty sure George knows his products when he said the OEM FW is not compatible with the clutch that I ordered. Can anyone chime in on this?

2. I've posted this before and have done tons of research. I am reading mixed reviews about Fever Racing (formerly Z Fever), between the reviews and even on this site. I've read raving threads whereas other threads are horror stories on this very site. Can anyone speak from experience on Fever Racing?

Z-Fever / Fever Racing

Just got tuned with impressive results

Z Fever in Tampa

Holy crap have you guys seen this terrible build?

danegrey · 12-19-2023, 06:39 AM

Now down to 6 days to XMAS..
time to start the wrapping/assembling to get done by Xmas
enjoy
Iconka-Santas-Santa-steal.256.png

Rusty · 12-19-2023, 06:59 AM

Woke up and everything is covered in white.

eastwest2300 · 12-19-2023, 08:06 AM

Quote:

Originally Posted by danegrey

Now down to 6 days to XMAS..
time to start the wrapping/assembling to get done by Xmas
enjoy
Attachment 152830

we're running outta time

christmas is right around the corner..

eastwest2300 · 12-19-2023, 08:08 AM

Quote:

Originally Posted by Rusty

Woke up and everything is covered in white.

it was 50 degrees this morning, thats pretty chilly for us folks down here.

Rusty · 12-19-2023, 08:34 AM

Quote:

Originally Posted by vtec to vvel

Finally have all the parts to replace the CSC/CMC, and I will be taking to a shop to get it replaced. My car can only make it a short distance (about 10 miles) before the clutch pedal goes soft and losing fluid in the reservoir.

Fever Racing is where I will most likely be going and spoke with the owner directly on separate occasions, with the last interaction somewhat putting me on edge. He is the one that recommended the ZSpeed kit, as he would not install the Z1 Kit. But what caught me off guard was he asked if I was planning on replacing the flywheel, to which I replied the kit I ordered came with it and he recommended leaving in the OEM flywheel while pairing with the clutch that came with the CMAK kit. He said something about the single mass FW from ZSpeed produces more noise and ruins the "engine harmonics".
After speaking with George at ZSpeed, he informed me that the clutch that comes with the CMAK kit that I ordered is not compatible with the OEM dual mass FW.

1. I'm wondering why Fever Racing that claims they have done many of these CMAK installs would tell me otherwise than what ZSpeed says. I'm pretty sure George knows his products when he said the OEM FW is not compatible with the clutch that I ordered. Can anyone chime in on this?

2. I've posted this before and have done tons of research. I am reading mixed reviews about Fever Racing (formerly Z Fever), between the reviews and even on this site. I've read raving threads whereas other threads are horror stories on this very site. Can anyone speak from experience on Fever Racing?

Z-Fever / Fever Racing

Just got tuned with impressive results

Z Fever in Tampa

Holy crap have you guys seen this terrible build?

The stack height of the CMAK has to match the stack height of the flywheel and pressure plate. If not, you either get a pressure plate that won't release or a pressure plate that won't engage.

You have a aftermarket flywheel pressure plate set up with a CMAK set to it. If you use the oem flywheel instead. You will have issues.

danegrey · 12-20-2023, 06:04 AM

Quote:

Originally Posted by Rusty

Woke up and everything is covered in white.

YES..... not here

danegrey · 12-20-2023, 06:06 AM

Now only 5 days to XMAS
got my wrapping all done, I can sit back and relax
enjoy the day
Dapino-Event-Xmas-Men-Santa-gift.512.png

Rusty · 12-20-2023, 07:03 AM

eastwest2300 · 12-20-2023, 07:36 AM

Quote:

Originally Posted by danegrey

Now only 5 days to XMAS
got my wrapping all done, I can sit back and relax
enjoy the day
Attachment 152832

5 days

have a great day sir.

eastwest2300 · 12-20-2023, 07:36 AM

Quote:

Originally Posted by Rusty

Rusty · 12-20-2023, 07:08 PM

.

vtec to vvel · 12-20-2023, 10:24 PM

Quote:

Originally Posted by Rusty

The stack height of the CMAK has to match the stack height of the flywheel and pressure plate. If not, you either get a pressure plate that won't release or a pressure plate that won't engage.

You have a aftermarket flywheel pressure plate set up with a CMAK set to it. If you use the oem flywheel instead. You will have issues.

As always, thanks for the helpful responses!

On a side note, I'm just going to throw this out there. As you may be aware, I don't like spring breakers nor snow birds. Given that we are in the winter season and the cold can be miserable, in FL, it supposed to be mid 70s for the next couple weeks. I will give you a one-time pass to come to FL as a snowbird with welcoming arms if you help me replace the CMC/CSC. Just saying

There's NOTHING like spending Christmas in shorts/sandals on the beach with clear blue skies and fishing in emerald green saltwater in 70-degree weather.

12-18-2023, 07:39 AM	#2552 (permalink)
eastwest2300 A True Z Fanatic Join Date: May 2010 Location: South FL Posts: 90,990 Drives: '16QX70/'21 Supra3.0 Rep Power: 2684550	have a good day as well rusty danegrey and Rusty like this. __________________ Infiniti QX70 & Toyota Supra 3.0 Premium

12-18-2023, 09:10 PM	#2553 (permalink)
vtec to vvel A True Z Fanatic Join Date: Feb 2015 Location: 813 Posts: 3,915 Drives: 13 Z Rep Power: 502909	Finally have all the parts to replace the CSC/CMC, and I will be taking to a shop to get it replaced. My car can only make it a short distance (about 10 miles) before the clutch pedal goes soft and losing fluid in the reservoir. Fever Racing is where I will most likely be going and spoke with the owner directly on separate occasions, with the last interaction somewhat putting me on edge. He is the one that recommended the ZSpeed kit, as he would not install the Z1 Kit. But what caught me off guard was he asked if I was planning on replacing the flywheel, to which I replied the kit I ordered came with it and he recommended leaving in the OEM flywheel while pairing with the clutch that came with the CMAK kit. He said something about the single mass FW from ZSpeed produces more noise and ruins the "engine harmonics". After speaking with George at ZSpeed, he informed me that the clutch that comes with the CMAK kit that I ordered is not compatible with the OEM dual mass FW. 1. I'm wondering why Fever Racing that claims they have done many of these CMAK installs would tell me otherwise than what ZSpeed says. I'm pretty sure George knows his products when he said the OEM FW is not compatible with the clutch that I ordered. Can anyone chime in on this? 2. I've posted this before and have done tons of research. I am reading mixed reviews about Fever Racing (formerly Z Fever), between the reviews and even on this site. I've read raving threads whereas other threads are horror stories on this very site. Can anyone speak from experience on Fever Racing? Z-Fever / Fever Racing Just got tuned with impressive results Z Fever in Tampa Holy crap have you guys seen this terrible build? FL 4Motion likes this. __________________ Don't like what I post? Too bad. I really don't give a sh!t

12-19-2023, 06:39 AM	#2554 (permalink)
danegrey A True Z Fanatic Join Date: Oct 2011 Location: Knoxville Age: 71 Posts: 3,190 Drives: 12 370Z BK Cherry M6 Rep Power: 649540	Now down to 6 days to XMAS.. time to start the wrapping/assembling to get done by Xmas enjoy Iconka-Santas-Santa-steal.256.png eastwest2300 and sx moneypit like this. __________________ Lots of Changes the Z needs to be driven and driven hard for the car lives for it

12-19-2023, 06:59 AM	#2555 (permalink)
Rusty Ronin Samurai - Assassin Join Date: Dec 2011 Location: Fayettenam,Pennsyltucky Age: 68 Posts: 35,221 Drives: 2011 Nismo GM 6M Rep Power: 2684438	Woke up and everything is covered in white. eastwest2300, danegrey and sx moneypit like this. __________________ 浪人 - 殺し屋 "The Difficult Anytime, The Impossible By Appointment Only" http://www.the370z.com/members-370z-...o-journal.html

12-20-2023, 06:06 AM	#2560 (permalink)
danegrey A True Z Fanatic Join Date: Oct 2011 Location: Knoxville Age: 71 Posts: 3,190 Drives: 12 370Z BK Cherry M6 Rep Power: 649540	Now only 5 days to XMAS got my wrapping all done, I can sit back and relax enjoy the day Dapino-Event-Xmas-Men-Santa-gift.512.png eastwest2300, Rusty and sx moneypit like this. __________________ Lots of Changes the Z needs to be driven and driven hard for the car lives for it

12-20-2023, 07:03 AM	#2561 (permalink)
Rusty Ronin Samurai - Assassin Join Date: Dec 2011 Location: Fayettenam,Pennsyltucky Age: 68 Posts: 35,221 Drives: 2011 Nismo GM 6M Rep Power: 2684438	eastwest2300 and sx moneypit like this. __________________ 浪人 - 殺し屋 "The Difficult Anytime, The Impossible By Appointment Only" http://www.the370z.com/members-370z-...o-journal.html

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
The New “What did you do with your Z today” (with off topic replies) XXXX	madwi	The Lounge (Off Topic)	12731	07-08-2023 05:11 PM
The New “What did you do with your Z today” (with off topic replies) XXXIX	Spoiler	The Lounge (Off Topic)	10010	07-02-2021 01:02 PM
The new “what did you do to your Z today” (with off topic replies) XXXVIII	Spoiler	The Lounge (Off Topic)	9999	12-23-2020 07:10 AM
The New “What did you do with your Z today” (with off topic replies) XXXVII	Spoiler	The Lounge (Off Topic)	9999	09-15-2020 10:07 PM
The New “What did you do with your Z today” (with off topic replies) XXXVI	Spoiler	The Lounge (Off Topic)	9999	06-10-2020 01:40 AM