The New “What did you do with your Z today” (with off topic replies) XXXIV

jchammond · 12-04-2019, 08:41 AM

Thinking about playing with my wood

Studying is getting boring

Leingod · 12-04-2019, 08:51 AM

Quote:

Originally Posted by sx moneypit

Note to Mr Leingod.Do not buy a Chevy Cruze.They are a POS.

What is bad about them? I don't doubt you. It's a Chevy after all. I use to own a cobalt so I'm fully aware of the heat shield rivets rusting after 3 days and the really crappy auto stop function when the brake is pressed at a standstill. As long as the engine doesn't grenade itself and it can absorb a pothole without trying to murder me. That's all I need. And it's only 7k with 57k on the odo. Haha.

JARblue · 12-04-2019, 08:53 AM

old guy · 12-04-2019, 08:54 AM

A buddy of mine is bringing over his f150 this morning and we're going to change out his serpentine belt, ideler pulley and install some H.I.D. bulbs for his trip out to Kansas to pheasant hunt. Then work on some fire wood and if I'm real ambitious go get a hair cut and beard trim..... the other day the guy at the car wash called me Mr. Clause

sx moneypit · 12-04-2019, 09:01 AM

Quote:

Originally Posted by Leingod

What is bad about them? I don't doubt you. It's a Chevy after all. I use to own a cobalt so I'm fully aware of the heat shield rivets rusting after 3 days and the really crappy auto stop function when the brake is pressed at a standstill. As long as the engine doesn't grenade itself and it can absorb a pothole without trying to murder me. That's all I need. And it's only 7k with 57k on the odo. Haha.

I have worked on quiet a few of them.Both the NA and the turbo versions have problems with the intake manifold and valve covers leaking vacuum and causing all sorts of drive ability and oil consumption problems.There is a laundry list of TSBs on them.

Zingston · 12-04-2019, 09:15 AM

Quote:

Originally Posted by sx moneypit

I have worked on quiet a few of them.Both the NA and the turbo versions have problems with the intake manifold and valve covers leaking vacuum and causing all sorts of drive ability and oil consumption problems.There is a laundry list of TSBs on them.

Hey, just curious... in your opinion, which brand(s) do you feel have the fewest problems?

sx moneypit · 12-04-2019, 09:49 AM

Quote:

Originally Posted by Zingston

Hey, just curious... in your opinion, which brand(s) do you feel have the fewest problems?

Honda,Toyota,Ford and Nissan give me the fewest headaches.

jchammond · 12-04-2019, 09:50 AM

Quote:

Originally Posted by Zingston

Hey, just curious... in your opinion, which brand(s) do you feel have the fewest problems?

Probably the Yota’s

eastwest2300 · 12-04-2019, 09:51 AM

Quote:

Originally Posted by onzedge

eastwest2300 · 12-04-2019, 09:52 AM

Quote:

Originally Posted by Leingod

What is bad about them? I don't doubt you. It's a Chevy after all. I use to own a cobalt so I'm fully aware of the heat shield rivets rusting after 3 days and the really crappy auto stop function when the brake is pressed at a standstill. As long as the engine doesn't grenade itself and it can absorb a pothole without trying to murder me. That's all I need. And it's only 7k with 57k on the odo. Haha.

zdayz duuude... focus... zdayz. you're welcome.

BettyZ · 12-04-2019, 10:23 AM

Quote:

Originally Posted by -ZS-Carpenter

That's a rough one. With the hip being thicker than the rafters we would normally fir the rafters to bury the hip before sheeting the rafters. Unless you start over on the angled sections the hip will just be left exposed. Attach a couple short 2x2 to the hip between the rafters to get the end of the sheet nailed tight. You might have to cut the bottom of the last 2 rafters off. I can't tell if it's camera angle or if they are way out of plane. May need a little butchery with a sawzall to clean out the corner.

To get a backer in the corner of the flat just cut a 45* on a 2x2 or flat 2x4 and run it from the ceiling joist into the hip at the point the flat part planes through. Might need to do one both ways. Don't worry about it being right at the end of the sheet. It can be back a couple inches if need be to make it fit.

onzedge · 12-04-2019, 10:27 AM

Check out the Datsun 240Z in this commercial:

eastwest2300 · 12-04-2019, 10:30 AM

eastwest2300 · 12-04-2019, 10:30 AM

you're welcome.

onzedge · 12-04-2019, 10:34 AM

Quote:

Originally Posted by eastwest2300

Quote:

Originally Posted by eastwest2300

you're welcome.

12-04-2019, 08:41 AM	#5326 (permalink)
jchammond A True Z Fanatic Join Date: Nov 2014 Location: South Carolina Age: 58 Posts: 15,204 Drives: 13’ 370Z TS 7A/T Rep Power: 2684395	Thinking about playing with my wood Studying is getting boring Rusty, old guy, redondoaveb and 1 others like this. __________________ MazWorx built long block \| FI-TT-100 Stage 2.75 \| IPT built 7A/T http://www.the370z.com/members-370z-...s-musings.html

12-04-2019, 08:53 AM	#5328 (permalink)
JARblue A True Z Fanatic Join Date: Mar 2011 Location: Austin, TX Age: 43 Posts: 36,450 Drives: 11 Z34, 98 E36 M3 Rep Power: 2684440	sx moneypit, jchammond and redondoaveb like this. __________________ 2011 370Z 6MT Sport Gun Metallic \| ARC \| CJM \| Ecutek \| FI \| Fujimura \| R2C \| SPL \| Stillen \| TWM \| Z1 \| ZSpeed \|

12-04-2019, 08:54 AM	#5329 (permalink)
old guy A True Z Fanatic Join Date: Apr 2015 Location: S.E. Michigan Age: 68 Posts: 2,710 Drives: 13 magma touring Rep Power: 2684369	A buddy of mine is bringing over his f150 this morning and we're going to change out his serpentine belt, ideler pulley and install some H.I.D. bulbs for his trip out to Kansas to pheasant hunt. Then work on some fire wood and if I'm real ambitious go get a hair cut and beard trim..... the other day the guy at the car wash called me Mr. Clause Rusty, Hotrodz, madwi and 9 others like this. __________________ I better walk before they make me run....

12-04-2019, 10:27 AM	#5337 (permalink)
onzedge A True Z Fanatic Join Date: Apr 2010 Location: Battle Lake MN Age: 64 Posts: 183,964 Drives: 370Z 240Z Rep Power: 2684736	Check out the Datsun 240Z in this commercial: Ghostvette, old guy and Spoiler like this. __________________ Koni\|Swift\|Michelin\|Motordyne\|Berk\|RJM Performance\|Gates\|SPL\|Motul\|Technafit\|Ate Super Blue\|Hawk Tommy Kaira\|Momo\|Optima\|Hella\|Hotchkis\|Red Line\|ZSpeed\|Stillen\|B&M\|H&R

12-04-2019, 10:30 AM	#5338 (permalink)
eastwest2300 A True Z Fanatic Join Date: May 2010 Location: South FL Posts: 90,973 Drives: '16QX70/'21 Supra3.0 Rep Power: 2684550	__________________ Infiniti QX70 & Toyota Supra 3.0 Premium

12-04-2019, 10:30 AM	#5339 (permalink)
eastwest2300 A True Z Fanatic Join Date: May 2010 Location: South FL Posts: 90,973 Drives: '16QX70/'21 Supra3.0 Rep Power: 2684550	you're welcome. __________________ Infiniti QX70 & Toyota Supra 3.0 Premium

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
The New "What did you do with your Z today" (with off topic replies) Cooking Edition	Leingod	The Lounge (Off Topic)	319	09-28-2021 11:10 PM
The New "What did you do with your Z today" (with off topic replies) XXIV	JARblue	The Lounge (Off Topic)	10059	08-17-2016 01:08 PM
The New "What did you do with your Z today" (with off topic replies) XXIII	eastwest2300	The Lounge (Off Topic)	10001	06-23-2016 10:21 AM
The New "What did you do with your Z today" (with off topic replies) XXII	eastwest2300	The Lounge (Off Topic)	10001	04-05-2016 09:15 PM