I've made some improvements to my garage

Jayhovah · 06-07-2019, 12:03 PM

Quote:

Originally Posted by sirnixalot

How is it you have all 3 of your 10mm's sockets accounted for

3 of 4... the deepwell is missing

sirnixalot · 06-07-2019, 12:13 PM

I missed that one

BettyZ · 06-07-2019, 02:21 PM

Quote:

Originally Posted by SouthArk370Z

Nice. Thanks for the tip.

I like the way the socket size is clearly printed on the holder - my eyes aren't what they used to be.

They come with a big ole pack of stickers with all the #s you'd ever need printed on them. I used a set of tweezers to place the stickers bc I have big, non-brain surgeon hands lol.

Quote:

Originally Posted by sirnixalot

How is it you have all 3 of your 10mm's sockets accounted for

Man.. I always lose one, order another, and find the original the week after the replacement comes.. so I have 2 or 3 spares for each 10 you see there lol.

MrMannilow · 06-08-2019, 11:34 PM

For the sake of throwing out ideas I ordered a bunch of this stuff from WallControl for my basement. I wanted something a bit more "professional looking" to display some stuff. Very happy with it https://www.wallcontrol.com/

I've been heavily working to clean out my garage as well as run some new electrical as the Z got a big brother a couple months ago.

I needed a new garage door seal I found on Amazon for like $30 I'll be trying to put that on tomorrow.

Great idea about the screen! Will definitely be looking to order one of those myself

SouthArk370Z · 06-09-2019, 11:53 AM

Found some hangable/mountable socket holders at Home Depot while I was getting styrofoam and some other odds and ends. Husky brand. Don't have the size marked on them but they were only $7 each and they hang well on the pegboard. The part that holds the socket is just like most ratchet heads - a spring-loaded ball. A few one-handed trials indicates they will fit my purposes well.

BettyZ · 06-09-2019, 02:34 PM

Quote:

Originally Posted by SouthArk370Z

Found some hangable/mountable socket holders at Home Depot while I was getting styrofoam and some other odds and ends. Husky brand. Don't have the size marked on them but they were only $7 each and they hang well on the pegboard. The part that holds the socket is just like most ratchet heads - a spring-loaded ball. A few one-handed trials indicates they will fit my purposes well.

that's just the start. Soon, everything will be hanging from the pegboard. When I changed my oil gallery gaskets I had every piece of the car forward of the timing cover hanging off my walls lol.

For hooks, I've found these "Wall Peg Hook Kit, 100-Pack, Black" from Amazon to be sturdy and effective.

SouthArk370Z · 06-09-2019, 03:45 PM

Quote:

Originally Posted by BettyZ

that's just the start. Soon, everything will be hanging from the pegboard. When I changed my oil gallery gaskets I had every piece of the car forward of the timing cover hanging off my walls lol.

For hooks, I've found these "Wall Peg Hook Kit, 100-Pack, Black" from Amazon to be sturdy and effective.

LOL I've got most of the pegboard covered and still have more tools to be hung - I've been collecting for over 40 years. I have a LOT of pliers of different sorts. For some reason, most of my slotted screwdrivers have disappeared - picked up a pack of cheap ones while shopping to use while I look for my lost sheep.

Got some hook assortment packs whilst at Home Depot. They even had a gizmo to hang drills that fits my drill.

Also got some spade bits to drill holes in the cabinets for the stereo wires. Got one hole drilled, so far.

Still throwing crap away. I've been in this house for about 25 years and it's amazing how much stuff has accumulated.

BettyZ · 06-09-2019, 06:43 PM

Quote:

Originally Posted by SouthArk370Z

LOL I've got most of the pegboard covered and still have more tools to be hung - I've been collecting for over 40 years. I have a LOT of pliers of different sorts. For some reason, most of my slotted screwdrivers have disappeared - picked up a pack of cheap ones while shopping to use while I look for my lost sheep.

Got some hook assortment packs whilst at Home Depot. They even had a gizmo to hang drills that fits my drill.

Also got some spade bits to drill holes in the cabinets for the stereo wires. Got one hole drilled, so far.

Still throwing crap away. I've been in this house for about 25 years and it's amazing how much stuff has accumulated.

"I didn't burn down the house for the insurance money, I burned it down to get rid of all this ****."

SouthArk370Z · 06-09-2019, 10:26 PM

Quote:

Originally Posted by BettyZ

"I didn't burn down the house for the insurance money, I burned it down to get rid of all this ****."

SouthArk370Z · 06-09-2019, 10:40 PM

Well, crap! Got to looking at seams in ceiling drywall where it has started to droop and found out that the drywall panels and rafters don't match-up very well and some of the drywall screws don't hit wood. Not that big of a deal since some 3-4" wide trim board along the seams will solve the problem (it's a garage, it doesn't have to be pretty). While measuring for trim board, discovered that rafters are on 24" centers, not 16" as in the rest of the house. My styrofoam panels for 16" centers aren't wide enough.

BettyZ · 06-10-2019, 12:54 AM

Ugh... reference my prior comment ab burning it down and starting anew..

Sent from my SM-G955U using Tapatalk

jchammond · 06-10-2019, 03:27 AM

I’m hoping to get something started up pretty soon; just haven’t ironed out all details...even thought of getting a nice portable 16x24 or 32 with roll up front & side entrance door...can always use for storage afterwards

They’re some pretty nice ones out there & would be easy to insulate, heat & cool

Some people are actually buying these & living in them...because of the building codes that they follow

But I’d call it a “doofer”(do for now) till I can get the larger one installed behind house

jchammond · 06-10-2019, 03:54 AM

One like this for now & wouldn’t go to waste,,,as I’m a collector

SouthArk370Z · 06-10-2019, 05:35 AM

Quote:

Originally Posted by BettyZ

Ugh... reference my prior comment ab burning it down and starting anew..

It's a little disheartening but only a minor setback. If HD doesn't have 22-1/2" wide styrofoam, they should have something that will work. I'm mainly looking at ease-of-installation.

I've heard rumors of fiberglass in a flattened paper tube so that only the ends have exposed fiberglass. Plus a higher R than styrofoam.

It's not always fun but it's never boring.

BettyZ · 06-10-2019, 10:02 AM

I know they have batts that'll fit. Or you could cut every other styrofoam board in 8 inch slices and then seal the connecting edges... but that's the opposite of "ease of installation" lol

Sent from my SM-G955U using Tapatalk

06-07-2019, 12:13 PM	#32 (permalink)
sirnixalot Track Member Join Date: May 2017 Location: Cayman Islands Posts: 685 Drives: 2010 370Z Rep Power: 57454	I missed that one BettyZ likes this. __________________ 2010 Sport - LS3 swap loading 2012 Frontier - BTWTuning VK56DE swap

06-09-2019, 11:53 AM	#35 (permalink)
SouthArk370Z Premium Member Join Date: Nov 2010 Location: South Arkansas Posts: 8,435 Drives: 2014 Challenger Rep Power: 324198	Found some hangable/mountable socket holders at Home Depot while I was getting styrofoam and some other odds and ends. Husky brand. Don't have the size marked on them but they were only $7 each and they hang well on the pegboard. The part that holds the socket is just like most ratchet heads - a spring-loaded ball. A few one-handed trials indicates they will fit my purposes well. BettyZ likes this. __________________ Steering Lock Links - Search The370Z Bookmarklet - FSM @ NICOclub Mankind has progressed past the need for war but we haven't evolved that far. - NachoMahma

06-09-2019, 10:40 PM	#40 (permalink)
SouthArk370Z Premium Member Join Date: Nov 2010 Location: South Arkansas Posts: 8,435 Drives: 2014 Challenger Rep Power: 324198	Well, crap! Got to looking at seams in ceiling drywall where it has started to droop and found out that the drywall panels and rafters don't match-up very well and some of the drywall screws don't hit wood. Not that big of a deal since some 3-4" wide trim board along the seams will solve the problem (it's a garage, it doesn't have to be pretty). While measuring for trim board, discovered that rafters are on 24" centers, not 16" as in the rest of the house. My styrofoam panels for 16" centers aren't wide enough. Ghostvette, jchammond and BettyZ like this. __________________ Steering Lock Links - Search The370Z Bookmarklet - FSM @ NICOclub Mankind has progressed past the need for war but we haven't evolved that far. - NachoMahma

06-10-2019, 12:54 AM	#41 (permalink)
BettyZ A True Z Fanatic Join Date: Aug 2018 Location: Chicagoland Age: 37 Posts: 5,261 Drives: A Garage Queen Rep Power: 2684371	Ugh... reference my prior comment ab burning it down and starting anew.. Sent from my SM-G955U using Tapatalk SouthArk370Z likes this. __________________ '14 MB Nismo \| Boost Lab 6870 1.32 AR 553 HP / 471 ft.-lbs. Betty Mods

06-10-2019, 03:27 AM	#42 (permalink)
jchammond A True Z Fanatic Join Date: Nov 2014 Location: South Carolina Age: 58 Posts: 15,204 Drives: 13’ 370Z TS 7A/T Rep Power: 2684394	I’m hoping to get something started up pretty soon; just haven’t ironed out all details...even thought of getting a nice portable 16x24 or 32 with roll up front & side entrance door...can always use for storage afterwards They’re some pretty nice ones out there & would be easy to insulate, heat & cool Some people are actually buying these & living in them...because of the building codes that they follow But I’d call it a “doofer”(do for now) till I can get the larger one installed behind house Ghostvette and BettyZ like this. __________________ MazWorx built long block \| FI-TT-100 Stage 2.75 \| IPT built 7A/T http://www.the370z.com/members-370z-...s-musings.html

06-10-2019, 10:02 AM	#45 (permalink)
BettyZ A True Z Fanatic Join Date: Aug 2018 Location: Chicagoland Age: 37 Posts: 5,261 Drives: A Garage Queen Rep Power: 2684371	I know they have batts that'll fit. Or you could cut every other styrofoam board in 8 inch slices and then seal the connecting edges... but that's the opposite of "ease of installation" lol Sent from my SM-G955U using Tapatalk __________________ '14 MB Nismo \| Boost Lab 6870 1.32 AR 553 HP / 471 ft.-lbs. Betty Mods

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
nissan chassis improvements due in 2017	UNKNOWN_370	Other Vehicles	2	03-14-2013 02:46 PM
Engine bay cooling improvements? DIY?	DIGItonium	Engine & Drivetrain	53	08-18-2011 10:27 AM
Base Radio Improvements	TomZ	Exterior & Interior	1	01-02-2011 04:23 PM
Bolt-on acceleration improvements	spearfish25	Track / Autocross / Drifting / Dragstrip	18	02-08-2010 08:34 PM