The New "What did you do with your Z today" (with off topic replies) XXXIII

Pintsize725 · 06-01-2019, 03:46 PM

Still waiting at the dealership....

BettyZ · 06-01-2019, 04:39 PM

Quote:

Originally Posted by Rusty

Was close to there yesterday.

I'm about 40 minutes away. I'm in Brownsville.

If you are planning to do all of the Blue Ridge. Plan on 2 days. Do it in the middle of the week. The weekends have heavy traffic of sightseers. We did half of it 2 years ago coming back from ZDayZ.

No kidding... my mother's side of the family has lived in G-burg for the past 40-odd years.

Two years ago I drove from Chicago to Waynesboro, VA, drove the entirety of the Blue Ridge, and made it back to the Chi in one sleep-cycle. Took about 27 hours. I hit the BRP at dawn so I had the road all to myself (minus the NPS Police) until Roanoke. A section of BRP north of Asheville was closed for construction so I didn't technically complete the whole route.. I will be correcting that oversight next week

. Leaving around 5-6pm Sunday. Taking into account stops to fix all the myriad little bugs I'm sure will pop up, I'll hit the southern portal to BRP just before dawn.

-ZS-Carpenter · 06-01-2019, 04:55 PM

Quote:

Originally Posted by BettyZ

No kidding... my mother's side of the family has lived in G-burg for the past 40-odd years.

Two years ago I drove from Chicago to Waynesboro, VA, drove the entirety of the Blue Ridge, and made it back to the Chi in one sleep-cycle. Took about 27 hours. I hit the BRP at dawn so I had the road all to myself (minus the NPS Police) until Roanoke. A section of BRP north of Asheville was closed for construction so I didn't technically complete the whole route.. I will be correcting that oversight next week

. Leaving around 5-6pm Sunday. Taking into account stops to fix all the myriad little bugs I'm sure will pop up, I'll hit the southern portal to BRP just before dawn.

We did the southern 1/3 on the way to Zdayz this year. Great drive just watch for cyclist, they are insane.

BettyZ · 06-01-2019, 05:06 PM

Quote:

Originally Posted by -ZS-Carpenter

We did the southern 1/3 on the way to Zdayz this year. Great drive just watch for cyclist, they are insane.

Thanks! I take it you had a close encounter?

jchammond · 06-01-2019, 05:09 PM

Quote:

Originally Posted by bunk

Have you watched the ballad of buster scruggs?

That’s a 2018 film

Most movies I watch are from the 50’s & 60’s....occasionally 30’s,40’s & 70’s

Leingod · 06-01-2019, 05:14 PM

Finally got time to start some projects on the rusted beater. Working out bonding the gaping holes in the rocker panels. Front half of the car is detailed. Took about an hr to do each panel correctly.

JARblue · 06-01-2019, 05:45 PM

Quote:

Originally Posted by BettyZ

Get it anyways lol, totally worth the CC debt. They're really portable and great for taking to the track

lol what a terrible idea... I don't do CC debt. If I can't pay it off that month, I don't buy it. I could theoretically get it with 0% financing from Home Depot. Might do that down the road if I feel the need. But I don't right now.

Quote:

Originally Posted by BettyZ

Yup! It's a simple equation: life > $990.00. Jackstands aren't safe enough for me, don't care who makes 'em or what they're rated for. I've had one fail and a guy on my block died when a jack failed and the car fell on him.

Besides, you can give everyone you know penis lift envy when they watch your Z magically and effortlessly rise into the air. That's worth at least $500.

If jack stands can fail, so can a Quickjack. If I were seriously concerned about that chance, I would be doing redundant support (either double jack stands or jack stands with the QJ).

-ZS-Carpenter · 06-01-2019, 06:15 PM

Quote:

Originally Posted by JARblue

If jack stands can fail, so can a Quickjack. If I were seriously concerned about that chance, I would be doing redundant support (either double jack stands or jack stands with the QJ).

I'm not buying the safer than stands either. More convenient for sure but any lifting device can fail.

Sent from my SM-G965U using Tapatalk

Rusty · 06-01-2019, 07:01 PM

When I worked for Goodyear. We had a single post lift fail. Co-worker was raising a car up. Was getting ready to go and set the safety. When a line failed under the concrete. Slamming the car to the ground. Figure the car fell about 7ft. I was off that day thank God. When they jack hammered the concrete. The line that failed was rusted through.

So they fixed that one. Then took the other 8 out of service one at a time and replaced all of the lines.

redondoaveb · 06-01-2019, 07:22 PM

Quote:

Originally Posted by Rusty

When I worked for Goodyear. We had a single post lift fail. Co-worker was raising a car up. Was getting ready to go and set the safety. When a line failed under the concrete. Slamming the car to the ground. Figure the car fell about 7ft. I was off that day thank God. When they jack hammered the concrete. The line that failed was rusted through.

So they fixed that one. Then took the other 8 out of service one at a time and replaced all of the lines.

Co-workers new nickname is "shorty"

BettyZ · 06-01-2019, 07:28 PM

Quote:

Originally Posted by -ZS-Carpenter

I'm not buying the safer than stands either. More convenient for sure but any lifting device can fail.

Sent from my SM-G965U using Tapatalk

I'm thinking more about the process of lifting the Z and putting it on four stands compared to using the QJ. Additionally, if you keep the hydraulics pressurized after you lock the QJ in place, even if the locking mechanism fails the car isn't going anywhere.

-ZS-Carpenter · 06-01-2019, 07:57 PM

Quote:

Originally Posted by redondoaveb

Co-workers new nickname is "shorty"

It's not funny when someone dies under failed lifting equipment. We had a crew on a job in TX that it happened to just a couple years back. Not one of our guys but another sub on the same site. Guy was welding under a dump pit suspended by a crane with slings that where way more than out of service. When the sling broke the dump landed on his head.

BoneZ · 06-01-2019, 07:58 PM

Moving washer and dryer upstairs with no dolly.

-ZS-Carpenter · 06-01-2019, 08:04 PM

Quote:

Originally Posted by BettyZ

Thanks! I take it you had a close encounter?

Not really, just seeing those guys huffing and puffing up the mountain in what seemed the lowest gear possible made me question their sanity

eastwest2300 · 06-01-2019, 08:35 PM

Quote:

Originally Posted by Rusty

06-01-2019, 03:46 PM	#1831 (permalink)
Pintsize725 A True Z Fanatic Join Date: Jan 2012 Location: Austin Posts: 14,196 Drives: 2016 Mazda 6 Rep Power: 211844	Still waiting at the dealership.... __________________ Tracie

06-01-2019, 05:14 PM	#1836 (permalink)
Leingod A True Z Fanatic Join Date: Mar 2015 Location: Some Place Cold Posts: 16,060 Drives: In Circles Rep Power: 2684396	Finally got time to start some projects on the rusted beater. Working out bonding the gaping holes in the rocker panels. Front half of the car is detailed. Took about an hr to do each panel correctly. Memphis370Z and BettyZ like this. __________________ I AM FLOOF! SOMEBODY FLOOF MY HORN!! ALL HAIL THE FLOOF!!I JUST FLOOFED ON THE FLOOR

06-01-2019, 07:01 PM	#1839 (permalink)
Rusty Ronin Samurai - Assassin Join Date: Dec 2011 Location: Fayettenam,Pennsyltucky Age: 68 Posts: 35,173 Drives: 2011 Nismo GM 6M Rep Power: 2684437	When I worked for Goodyear. We had a single post lift fail. Co-worker was raising a car up. Was getting ready to go and set the safety. When a line failed under the concrete. Slamming the car to the ground. Figure the car fell about 7ft. I was off that day thank God. When they jack hammered the concrete. The line that failed was rusted through. So they fixed that one. Then took the other 8 out of service one at a time and replaced all of the lines. old guy, -ZS-Carpenter, redondoaveb and 1 others like this. __________________ 浪人 - 殺し屋 "The Difficult Anytime, The Impossible By Appointment Only" http://www.the370z.com/members-370z-...o-journal.html

06-01-2019, 07:58 PM	#1843 (permalink)
BoneZ A True Z Fanatic Join Date: May 2015 Location: Atlanta, GA Age: 52 Posts: 9,299 Drives: 2012 Blue BallZ Rep Power: 2684382	Moving washer and dryer upstairs with no dolly. Rusty likes this. __________________ *“Happiness is having a large, loving, caring, close-knit family in another city.”*-George Burns

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
The New "What did you do with your Z today" (with off topic replies) Cooking Edition	Leingod	The Lounge (Off Topic)	319	09-28-2021 11:10 PM
The New "What did you do with your Z today" (with off topic replies) XXVI	JARblue	The Lounge (Off Topic)	10020	04-23-2017 12:37 PM
The New "What did you do with your Z today" (with off topic replies) XVIII	eastwest2300	The Lounge (Off Topic)	10000	07-09-2015 08:48 PM