The New "What did you do with your Z today" (with off topic replies) XXXII

Rusty · 05-11-2019, 09:36 PM

Quote:

Originally Posted by bunk

Quote:

Originally Posted by jchammond

Looking like you’re FUCA it up

Instead of just cutting the threads sticking out. Lets remove the welded nut too.

bunk, what are we going to do with you? You are reminding me of Zoren when he worked on his Z.

eastwest2300 · 05-11-2019, 09:36 PM

Quote:

Originally Posted by Rusty

In my neighborhood. A picture like that would never happen. All you would hear is shotguns going off.

No Drone Fly Zone. All Drones Will Be Used As Targets.

im calling the police duuuude...

Rusty · 05-11-2019, 09:41 PM

Quote:

Originally Posted by eastwest2300

im always nice duuuuude...

Until you change. I'm going to keep smacking you in the balls with a cast iron skillet.

bunk · 05-11-2019, 09:41 PM

Quote:

Originally Posted by Rusty

Instead of just cutting the threads sticking out. Lets remove the welded nut too.

bunk, what are we going to do with you? You are reminding me of Zoren when he worked on his Z.

Sheared off while torquing down.

bunk · 05-11-2019, 09:43 PM

52ft lbs.... I threw my torque wrench half way down the street when it sheared that bolt..

Rusty · 05-11-2019, 09:43 PM

Quote:

Originally Posted by eastwest2300

im calling the police duuuude...

Go ahead. The Chief is my neighbor. Lives across the street, 3 houses up. He would be the one to say, ready on the right, ready on the left. FIRE!

Rusty · 05-11-2019, 09:53 PM

Quote:

Originally Posted by bunk

52ft lbs.... I threw my torque wrench half way down the street when it sheared that bolt..

Ohhhh CHIT! I missed that bolt. I was trying to look at the thread on the little bolt sticking out.

What's left of the bolt thread out?

52lbs? It's only to be 40 lbs. If you was reading 54 in the manual. The first number is Nm. 54 (5.5, 40) The last number is Lbs.

bunk · 05-11-2019, 09:57 PM

Nm???? Hmm.. I'll have to check spl instructions again.i soaked it with PB blaster and I'll try to use small needle nose pliers on the little piece of the bolt not sure if I can drill it to extract because where it screw in, it wiggles along with what's left of that bolt

jchammond · 05-11-2019, 09:58 PM

Quote:

Originally Posted by bunk

Yeah... do you see it?

They’re adjustable; you adjust your camber & caster with them...I’ve never installed any ~ You gotta get instructions from a FUCA Professional

jchammond · 05-11-2019, 10:00 PM

Quote:

Originally Posted by bunk

Nm???? Hmm.. I'll have to check spl instructions again.i soaked it with PB blaster and I'll try to use small needle nose pliers on the little piece of the bolt not sure if I can drill it to extract because where it screw in, it wiggles along with what's left of that bolt

Newton Meters; Roughly 25% higher reading than ft#

Rusty · 05-11-2019, 10:09 PM

Quote:

Originally Posted by bunk

Nm???? Hmm.. I'll have to check spl instructions again.i soaked it with PB blaster and I'll try to use small needle nose pliers on the little piece of the bolt not sure if I can drill it to extract because where it screw in, it wiggles along with what's left of that bolt

Needle nose vise grips would be better.

My SPL instructions doesn't have any torque specs.

bunk · 05-11-2019, 10:11 PM

Yep.. ft lbs... step 8 in the instructions.

BettyZ · 05-11-2019, 10:23 PM

Quote:

Originally Posted by bunk

Yep.. ft lbs... step 8 in the instructions.

Jeez man I'm sorry... that's a rough one.

Sent from my SM-G955U using Tapatalk

Rusty · 05-11-2019, 10:23 PM

Quote:

Originally Posted by bunk

Yep.. ft lbs... step 8 in the instructions.

I don't have those instructions.

I just double checked the manual.

It's listed as 54 (5.5, 40) for torque spec. N·m (kg-m, ft-lb)

SPL dropped the ball on that one.

bunk · 05-11-2019, 10:28 PM

I'll be speaking with them on monday.... grrrr

05-11-2019, 09:43 PM	#9845 (permalink)
bunk A True Z Fanatic Join Date: Mar 2018 Location: Southern California Posts: 4,077 Drives: 2010 370z Roadster Rep Power: 2684369	52ft lbs.... I threw my torque wrench half way down the street when it sheared that bolt.. jwick, Hotrodz, jchammond and 2 others like this. __________________ -Drop in K&N Filter -Invidia Gemini CBE -Z1 Oil Cooler -Swift Springs - EcuTek -Forgestar F14 -SPL Camber Links -Akebono BBK Upgrade -Z1 Premium SS Lines -SPL Diff Bushings -SPL FUCAs - BellRaceworks Diff Brace

05-11-2019, 09:57 PM	#9848 (permalink)
bunk A True Z Fanatic Join Date: Mar 2018 Location: Southern California Posts: 4,077 Drives: 2010 370z Roadster Rep Power: 2684369	Nm???? Hmm.. I'll have to check spl instructions again.i soaked it with PB blaster and I'll try to use small needle nose pliers on the little piece of the bolt not sure if I can drill it to extract because where it screw in, it wiggles along with what's left of that bolt __________________ -Drop in K&N Filter -Invidia Gemini CBE -Z1 Oil Cooler -Swift Springs - EcuTek -Forgestar F14 -SPL Camber Links -Akebono BBK Upgrade -Z1 Premium SS Lines -SPL Diff Bushings -SPL FUCAs - BellRaceworks Diff Brace

05-11-2019, 10:28 PM	#9855 (permalink)
bunk A True Z Fanatic Join Date: Mar 2018 Location: Southern California Posts: 4,077 Drives: 2010 370z Roadster Rep Power: 2684369	I'll be speaking with them on monday.... grrrr Rusty likes this. __________________ -Drop in K&N Filter -Invidia Gemini CBE -Z1 Oil Cooler -Swift Springs - EcuTek -Forgestar F14 -SPL Camber Links -Akebono BBK Upgrade -Z1 Premium SS Lines -SPL Diff Bushings -SPL FUCAs - BellRaceworks Diff Brace

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
The New "What did you do with your Z today" (with off topic replies) Cooking Edition	Leingod	The Lounge (Off Topic)	319	09-28-2021 11:10 PM
The New "What did you do with your Z today" (with off topic replies) XXVIII	JARblue	The Lounge (Off Topic)	10014	04-26-2018 11:07 AM
The New "What did you do with your Z today" (with off topic replies) XXVII	JARblue	The Lounge (Off Topic)	9999	11-26-2017 08:08 AM
The New "What did you do with your Z today" (with off topic replies) XIII	JARblue	The Lounge (Off Topic)	10011	08-04-2014 05:16 PM