The New "What did you do with your Z today" (with off topic replies) XXXII

jwick · 04-28-2019, 06:56 PM

Quote:

Originally Posted by madwi

7-8 hours seems to be the sweet spot. We got done a little bit early and I was hungry/tired/grumpy so we made do. It wasnt terrible but not amazing.

I’d agree about 8 hrs is about right.

Rusty · 04-28-2019, 07:04 PM

I will not be selling the Stillen brake duct kit. Found out a few things and will be using the Stillen backing plates again.

I did the driver side with the stock plate. Found out that it flexed a lot when turning the steering wheel to the left. The 3" hose would push the plate into the rotor. The stock backing plate is .032" thick and has an offset of 3/16". The Stillen backing plate is .039" thick and an offset of 5/16". So the Stillen plate is 1/8" farther away from the rotor and is a little stiffer. So I modding the Stillen plates for the 3" hose.

jchammond · 04-28-2019, 07:10 PM

Got some more work outside done today & Looking to come off some bills this upcoming week for a new “Rabbit-Hole”.....

jchammond · 04-28-2019, 07:11 PM

Quote:

Originally Posted by Leingod

I'm accustomed to 8 hrs in a bath. But I also cold smoke for 2 hrs beforehand.

Cold smoke what

jwick · 04-28-2019, 07:21 PM

Quote:

Originally Posted by jchammond

Cold smoke what

How I make bacon. Of course you can only do it for 3-4 months of the year in Texas.

Leingod · 04-28-2019, 08:08 PM

Quote:

Originally Posted by jchammond

Cold smoke what

A rack of ribs when I don't want to screw with temps all day for my smoker. So cold smoke for 2 hrs followed by a sous vide bath for 8 hrs.

Spoiler · 04-28-2019, 08:44 PM

Not sure what the weather was where all you guys are at, but it was pretty dang nice at my house today. Took Mrs Spoiler out for a three hour boat ride and then we set out back to see the sunset...

madwi · 04-28-2019, 09:27 PM

Quote:

Originally Posted by Spoiler

Not sure what the weather was where all you guys are at, but it was pretty dang nice at my house today. Took Mrs Spoiler out for a three hour boat ride and then we set out back to see the sunset...

Dont get much better than that!

God-Speed · 04-28-2019, 10:07 PM

Great day here in Austin. Could not have asked for better weather. Went to a 8;45am Avengers this morning. One word AWSOME!!!

This evening grilled steak and salmon for the Mrs and myself. Great Day!!

madwi · 04-28-2019, 10:22 PM

IT was much warmer here than I thought it was going to be. Worked out in the garage most of the day.

jchammond · 04-28-2019, 10:22 PM

Night fellas; plan to make the transaction this week on the Z,,,then clean/cover

Rusty · 04-28-2019, 10:56 PM

Quote:

Originally Posted by madwi

Dont get much better than that!

Rusty · 04-28-2019, 10:57 PM

Quote:

Originally Posted by madwi

IT was much warmer here than I thought it was going to be. Worked out in the garage most of the day.

It was in the low 50's and overcast today. Tomorrow in the mid 70's.

Rusty · 04-28-2019, 11:03 PM

Got the right side 3" brake hose done.

Boy, that's a tight fit. Had to oval the hose for tire clearance right above the sway bar. Tomorrow, I will have the left side done.

Rusty · 04-28-2019, 11:04 PM

Snackin' on some pizza rolls.

04-28-2019, 07:04 PM	#8237 (permalink)
Rusty Ronin Samurai - Assassin Join Date: Dec 2011 Location: Fayettenam,Pennsyltucky Age: 68 Posts: 35,217 Drives: 2011 Nismo GM 6M Rep Power: 2684438	I will not be selling the Stillen brake duct kit. Found out a few things and will be using the Stillen backing plates again. I did the driver side with the stock plate. Found out that it flexed a lot when turning the steering wheel to the left. The 3" hose would push the plate into the rotor. The stock backing plate is .032" thick and has an offset of 3/16". The Stillen backing plate is .039" thick and an offset of 5/16". So the Stillen plate is 1/8" farther away from the rotor and is a little stiffer. So I modding the Stillen plates for the 3" hose. JARblue, Hotrodz, madwi and 6 others like this. __________________ 浪人 - 殺し屋 "The Difficult Anytime, The Impossible By Appointment Only" http://www.the370z.com/members-370z-...o-journal.html

04-28-2019, 07:10 PM	#8238 (permalink)
jchammond A True Z Fanatic Join Date: Nov 2014 Location: South Carolina Age: 58 Posts: 15,204 Drives: 13’ 370Z TS 7A/T Rep Power: 2684395	Got some more work outside done today & Looking to come off some bills this upcoming week for a new “Rabbit-Hole”..... Rusty, Hotrodz, madwi and 3 others like this. __________________ MazWorx built long block \| FI-TT-100 Stage 2.75 \| IPT built 7A/T http://www.the370z.com/members-370z-...s-musings.html

04-28-2019, 10:07 PM	#8244 (permalink)
God-Speed A True Z Fanatic Join Date: Sep 2010 Location: Austin, Tx. Posts: 4,365 Drives: Prototype Rep Power: 2684377	Great day here in Austin. Could not have asked for better weather. Went to a 8;45am Avengers this morning. One word AWSOME!!! This evening grilled steak and salmon for the Mrs and myself. Great Day!! jwick, Hotrodz, madwi and 2 others like this.

04-28-2019, 10:22 PM	#8245 (permalink)
madwi A True Z Fanatic Join Date: Sep 2012 Location: West Michigan Posts: 31,410 Drives: Granma red Z Rep Power: 2684429	IT was much warmer here than I thought it was going to be. Worked out in the garage most of the day. old guy and Spoiler like this.

04-28-2019, 10:22 PM	#8246 (permalink)
jchammond A True Z Fanatic Join Date: Nov 2014 Location: South Carolina Age: 58 Posts: 15,204 Drives: 13’ 370Z TS 7A/T Rep Power: 2684395	Night fellas; plan to make the transaction this week on the Z,,,then clean/cover Rusty, madwi, Spooler and 2 others like this. __________________ MazWorx built long block \| FI-TT-100 Stage 2.75 \| IPT built 7A/T http://www.the370z.com/members-370z-...s-musings.html

04-28-2019, 11:03 PM	#8249 (permalink)
Rusty Ronin Samurai - Assassin Join Date: Dec 2011 Location: Fayettenam,Pennsyltucky Age: 68 Posts: 35,217 Drives: 2011 Nismo GM 6M Rep Power: 2684438	Got the right side 3" brake hose done. Boy, that's a tight fit. Had to oval the hose for tire clearance right above the sway bar. Tomorrow, I will have the left side done. Hotrodz, madwi, Ghostvette and 3 others like this. __________________ 浪人 - 殺し屋 "The Difficult Anytime, The Impossible By Appointment Only" http://www.the370z.com/members-370z-...o-journal.html

04-28-2019, 11:04 PM	#8250 (permalink)
Rusty Ronin Samurai - Assassin Join Date: Dec 2011 Location: Fayettenam,Pennsyltucky Age: 68 Posts: 35,217 Drives: 2011 Nismo GM 6M Rep Power: 2684438	Snackin' on some pizza rolls. Spooler likes this. __________________ 浪人 - 殺し屋 "The Difficult Anytime, The Impossible By Appointment Only" http://www.the370z.com/members-370z-...o-journal.html

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
The New "What did you do with your Z today" (with off topic replies) Cooking Edition	Leingod	The Lounge (Off Topic)	319	09-28-2021 11:10 PM
The New "What did you do with your Z today" (with off topic replies) XXVIII	JARblue	The Lounge (Off Topic)	10014	04-26-2018 11:07 AM
The New "What did you do with your Z today" (with off topic replies) XXVII	JARblue	The Lounge (Off Topic)	9999	11-26-2017 08:08 AM
The New "What did you do with your Z today" (with off topic replies) XIII	JARblue	The Lounge (Off Topic)	10011	08-04-2014 05:16 PM