The New "What did you do with your Z today" (with off topic replies) XXXII

Spooler · 03-24-2019, 08:04 PM

Quote:

Originally Posted by BoneZ

yep.

CBP Kits... tried and true.

https://www.cbperformance.com/product-p/1186.htm

Let me give you some advice. The largest piston/barrel combo needs to be 90.5mm. Longevity wise they are king. Lesson learned here. I ordered at 2110cc engine, 90.5mm x 82mm. What I got was a 2165cc, 94mm x 78mm stroke. I got the big valve 044 heads. I ended up having to go back through the engine, replace the heads with some Gene Berg ported/polished semi hemi cut heads. The machine work was beautiful. I would suggest you get Gene Berg's books and read them. Save yourself some time and money.

Rusty · 03-24-2019, 08:05 PM

Quote:

Originally Posted by Spooler

Your memory would serve you as correct. LOL

I can remember one guy driving in and asking for a tune up. Pulled the plugs out and they was covered in oil, plus one had a smashed electrode. Hmmmmm did a compression test. One cylinder had zero compression. Removed the valve cover. Packed full of sludge.

Turned the motor over by hand. The the rockers for the valves on the zero cylinder barely moved. Hmmmm removed the rockers and the push rods wouldn't come out. Hmmmmm finally got them out and they was bent. Hmmmmmm Removed the head and had 2 pistons at TDC. Hmmmmmmmmm Rebuild time. This was the first time I seen a piston break at the oil ring land. The top of the piston was at TDC and the rest of the piston shirt was still moving in the cylinder like nothing happened.

Rusty · 03-24-2019, 08:07 PM

Quote:

Originally Posted by eastwest2300

dont buy a VW

The air cooled motors liked Castrol oil. No sludge.

BoneZ · 03-24-2019, 08:13 PM

Quote:

Originally Posted by Spooler

Let me give you some advice. The largest piston/barrel combo needs to be 90.5mm. Longevity wise they are king. Lesson learned here. I ordered at 2110cc engine, 90.5mm x 82mm. What I got was a 2165cc, 94mm x 78mm stroke. I got the big valve 044 heads. I ended up having to go back through the engine, replace the heads with some Gene Berg ported/polished semi hemi cut heads. The machine work was beautiful. I would suggest you get Gene Berg's books and read them. Save yourself some time and money.

I actually though about turbocharging a 2005 and using the 2.0T Audi badging.

https://www.cbperformance.com/product-p/1182.htm

BoneZ · 03-24-2019, 08:14 PM

Quote:

Originally Posted by Rusty

The air cooled motors liked Castrol oil. No sludge.

Shell Rotella

Rusty · 03-24-2019, 08:16 PM

Quote:

Originally Posted by BoneZ

Shell Rotella

I don't know what they use now.

Spooler · 03-24-2019, 08:20 PM

Quote:

Originally Posted by BoneZ

I actually though about turbocharging a 2005 and using the 2.0T Audi badging.

https://www.cbperformance.com/product-p/1182.htm

2110cc with some 90.5mm thick wall cylinder jugs. Which means you would boar out to 92mm's.

eastwest2300 · 03-24-2019, 08:24 PM

Quote:

Originally Posted by Rusty

The air cooled motors liked Castrol oil. No sludge.

eastwest2300 · 03-24-2019, 08:25 PM

my tummy hurts

bunk · 03-24-2019, 08:28 PM

Quote:

Originally Posted by Rusty

The air cooled motors liked Castrol oil. No sludge.

Yup. Castrol wa all we used growing up. But my dad never bought the big jugs, always by the quart.

Falconquey · 03-24-2019, 08:29 PM

Quote:

Originally Posted by eastwest2300

my tummy hurts

bunk · 03-24-2019, 08:32 PM

Quote:

Originally Posted by Rusty

You know where I live.

Get the Z1 kit of SPL bushing and the Z1 cover.

That would be a longggggg drive..lol..I have the quickjack, 4 jackstands and a floor jack. I'll take a stab at the diff project. I'll just tell my gf to call the ambulance when she hears me say... hold my beer. Watch this!

jchammond · 03-24-2019, 08:36 PM

That’s what I’m talking about; Lee Van Cleef coming to Audie Murphy’s rescue

He’s normally the bad guy,,,old movie I guess

jchammond · 03-24-2019, 08:37 PM

Quote:

Originally Posted by jchammond

Headed for some ice cream

75* & sunshine

Quote:

Originally Posted by bunk

That would be a longggggg drive..lol..I have the quickjack, 4 jackstands and a floor jack. I'll take a stab at the diff project. I'll just tell my gf to call the ambulance when she hears me say... hold my beer. Watch this!

Be sure & put on good support stands...don’t need that thing falling on you

eastwest2300 · 03-24-2019, 08:41 PM

Quote:

Originally Posted by Falconquey

03-24-2019, 08:25 PM	#3264 (permalink)
eastwest2300 A True Z Fanatic Join Date: May 2010 Location: South FL Posts: 90,989 Drives: '16QX70/'21 Supra3.0 Rep Power: 2684550	my tummy hurts __________________ Infiniti QX70 & Toyota Supra 3.0 Premium

03-24-2019, 08:36 PM	#3268 (permalink)
jchammond A True Z Fanatic Join Date: Nov 2014 Location: South Carolina Age: 58 Posts: 15,204 Drives: 13’ 370Z TS 7A/T Rep Power: 2684395	That’s what I’m talking about; Lee Van Cleef coming to Audie Murphy’s rescue He’s normally the bad guy,,,old movie I guess sx moneypit and old guy like this. __________________ MazWorx built long block \| FI-TT-100 Stage 2.75 \| IPT built 7A/T http://www.the370z.com/members-370z-...s-musings.html

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
The New "What did you do with your Z today" (with off topic replies) Cooking Edition	Leingod	The Lounge (Off Topic)	319	09-28-2021 11:10 PM
The New "What did you do with your Z today" (with off topic replies) XXVIII	JARblue	The Lounge (Off Topic)	10014	04-26-2018 11:07 AM
The New "What did you do with your Z today" (with off topic replies) XXVII	JARblue	The Lounge (Off Topic)	9999	11-26-2017 08:08 AM
The New "What did you do with your Z today" (with off topic replies) XIII	JARblue	The Lounge (Off Topic)	10011	08-04-2014 05:16 PM