The New "What did you do with your Z today" (with off topic replies) XXIX

Hotrodz · 07-13-2018, 11:33 AM

Quote:

Originally Posted by Leingod

No worries. I was mainly messing with EW. $500 for craftsquares.

LMAO...he doesn't need them!

Sent from my SM-G965U using Tapatalk

Hotrodz · 07-13-2018, 11:36 AM

You could do what someone did to my evo-r mirrors...they just snapped them off at the base of the suppport stem.

Sent from my SM-G965U using Tapatalk

Leingod · 07-13-2018, 11:38 AM

Really gotta love people.... Can't have anything nice. That's horrible man.

Ian B · 07-13-2018, 11:49 AM

Just got up, breakfast, taking calls for 1.5 hours, wash car and then get ready for work at clinic till 11p.

Have a great weekend everyone,

Ian B

Rusty · 07-13-2018, 12:12 PM

Quote:

Originally Posted by bunk

hahha.. I sure do miss the shenanigans that happens when you get a group of good guys together. Along these lines, I had a platoon sgt who used to always say that you have to be 10 percent smarter than the equipment youre working with!

When we was building the power plant. I went around and welded 2 dozen 1/2" diameter x 2" long pipe nipples on some of the big beams in the turbine building. Then I installed a valve in each pipe nipple, with a 90deg elbow on the end. With each new outside operator. We would tell them that they had to check the moisture content in each beam. They had to open the valve and drain out the water and measure how much water was at each beam. We even had a spread sheet for it. What they didn't know. The senior operator on the shift before would go around and turn the 90deg elbow up. Open the valve and fill up the pipe nipple. Once full. Close the valve and turn the elbow back down. Some took weeks to catch on. The operations manager knew about it, and never said anything about it. It was a way for us to tell who would make it and who wouldn't.

Rusty · 07-13-2018, 12:13 PM

Good to be home repZ.

Baronsmokes · 07-13-2018, 12:28 PM

I have bean driving the Z a lot.

I have a few small things I'm trying to Finish.

Hard to work on car when it's Summer.

eastwest2300 · 07-13-2018, 12:28 PM

Quote:

Originally Posted by Leingod

Gotta move quick duuuuudddeeeeee

eastwest2300 · 07-13-2018, 12:29 PM

Quote:

Originally Posted by Leingod

No worries. I was mainly messing with EW. $500 for craftsquares.

bunk · 07-13-2018, 12:43 PM

No leaks!! Now I have to pick up all my tools, dress up the lines, trim zip ties, test drive, front left wheel off so I can put the wheel well cover back on, reinstall wheel, bumper back on, under tray back on
..I wish I had a minion...

Edit...I mean front right wheel

bunk · 07-13-2018, 12:48 PM

Quote:

Originally Posted by Rusty

When we was building the power plant. I went around and welded 2 dozen 1/2" diameter x 2" long pipe nipples on some of the big beams in the turbine building. Then I installed a valve in each pipe nipple, with a 90deg elbow on the end. With each new outside operator. We would tell them that they had to check the moisture content in each beam. They had to open the valve and drain out the water and measure how much water was at each beam. We even had a spread sheet for it. What they didn't know. The senior operator on the shift before would go around and turn the 90deg elbow up. Open the valve and fill up the pipe nipple. Once full. Close the valve and turn the elbow back down. Some took weeks to catch on. The operations manager knew about it, and never said anything about it. It was a way for us to tell who would make it and who wouldn't.

One of the best was telling new guys they need to take an exhaust sample. They'd go to whatever vehicle and hold a plastic trash bag and fill it with exhaust..lol.. even funnier when that vehicle was an M1 tank... no exhaust pipe, but a big grill. They'd swipe at the air behind the tank trying to capture exhaust

Rusty · 07-13-2018, 12:49 PM

Quote:

Originally Posted by bunk

No leaks!! Now I have to pick up all my tools, dress up the lines, trim zip ties, test drive, front left wheel off so I can put the wheel well cover back on, reinstall wheel, bumper back on, under tray back on
..I wish I had a minion...

killrain · 07-13-2018, 12:54 PM

Quote:

Originally Posted by Baronsmokes

I have bean driving the Z a lot.

I have a few small things I'm trying to Finish.

Hard to work on car when it's Summer.

So true.

With the random, sometimes all week showers here, it’s hard to even wash the Z. Let alone this heat.

Hotrodz · 07-13-2018, 12:54 PM

Quote:

Originally Posted by Leingod

Really gotta love people.... Can't have anything nice. That's horrible man.

Yea, I couldn't believe it. I didn't notice them missing until I was in the line to have my tech inspection for that days track session. It was not a good day as I didn't get to run because my car was too loud.

Sent from my SM-G965U using Tapatalk

StevenSlice · 07-13-2018, 01:05 PM

So... I picked up a miata last weekend as a temp replacement for the Z, then as a pure fun car once its back. And well, the previous owner is a tool. This car is such a hack-job its ridiculous. Im gonna photo dump, because i know a lot of you will get a kick out of what some people do and its sooooo sad.

2000 NB1, and the whole thing is held together with probably a gallon of RTV, and stuff is so ghetto rigged its scary. The worst was the crank gear key, was just a shaved down piece of metal to "Fit". And everything is 10x harder to pull off because instead of gasket material they just slathered it in RTV.

07-13-2018, 11:36 AM	#5552 (permalink)
Hotrodz A True Z Fanatic Join Date: Aug 2012 Location: NW, AZ Posts: 9,330 Drives: 10 Nissan 370z Nismo Rep Power: 2684385	You could do what someone did to my evo-r mirrors...they just snapped them off at the base of the suppport stem. Sent from my SM-G965U using Tapatalk __________________ *Fast Intentions TT Installed and Tuned by Seb at SpecialtyZ 610whp 560tq:\|Fast Intentions 3" TT-TDX*\|SpecialtyZ/Fast Intentions 72 Row Oil Cooler\|SZ 6 Puck Clutch & Flywheel\|3GsCustoms\|Z1\|Wavetrac\|Hotchkis\|Whiteline \|Blitz\|Fortune Auto 500\|Fujimura\|SPL\|H&R\|TK\|TWM\|RPM Rollbar\|Sparco\|Next Level Performance\|TrackSpec\|AeroFlow Dynamics\|Pioneer\|

07-13-2018, 11:38 AM	#5553 (permalink)
Leingod A True Z Fanatic Join Date: Mar 2015 Location: Some Place Cold Posts: 16,060 Drives: In Circles Rep Power: 2684396	Really gotta love people.... Can't have anything nice. That's horrible man. Hotrodz and killrain like this. __________________ I AM FLOOF! SOMEBODY FLOOF MY HORN!! ALL HAIL THE FLOOF!!I JUST FLOOFED ON THE FLOOR

07-13-2018, 11:49 AM	#5554 (permalink)
Ian B Track Member Join Date: Mar 2011 Location: Cedar Park Posts: 679 Drives: 2010 Nissan Rep Power: 137465	Just got up, breakfast, taking calls for 1.5 hours, wash car and then get ready for work at clinic till 11p. Have a great weekend everyone, Ian B JLarson likes this.

07-13-2018, 12:13 PM	#5556 (permalink)
Rusty Ronin Samurai - Assassin Join Date: Dec 2011 Location: Fayettenam,Pennsyltucky Age: 68 Posts: 35,189 Drives: 2011 Nismo GM 6M Rep Power: 2684437	Good to be home repZ. Hotrodz, jchammond and Baronsmokes like this. __________________ 浪人 - 殺し屋 "The Difficult Anytime, The Impossible By Appointment Only" http://www.the370z.com/members-370z-...o-journal.html

07-13-2018, 12:43 PM	#5560 (permalink)
bunk A True Z Fanatic Join Date: Mar 2018 Location: Southern California Posts: 4,077 Drives: 2010 370z Roadster Rep Power: 2684369	No leaks!! Now I have to pick up all my tools, dress up the lines, trim zip ties, test drive, front left wheel off so I can put the wheel well cover back on, reinstall wheel, bumper back on, under tray back on ..I wish I had a minion... Edit...I mean front right wheel Rusty, Hotrodz, Ghostvette and 3 others like this. __________________ -Drop in K&N Filter -Invidia Gemini CBE -Z1 Oil Cooler -Swift Springs - EcuTek -Forgestar F14 -SPL Camber Links -Akebono BBK Upgrade -Z1 Premium SS Lines -SPL Diff Bushings -SPL FUCAs - BellRaceworks Diff Brace Last edited by bunk; 07-13-2018 at 12:51 PM.

07-13-2018, 01:05 PM	#5565 (permalink)
StevenSlice Track Member Join Date: Jun 2017 Location: Lompoc, CA Age: 27 Posts: 502 Drives: Like an idiot Rep Power: 46199	So... I picked up a miata last weekend as a temp replacement for the Z, then as a pure fun car once its back. And well, the previous owner is a tool. This car is such a hack-job its ridiculous. Im gonna photo dump, because i know a lot of you will get a kick out of what some people do and its sooooo sad. 2000 NB1, and the whole thing is held together with probably a gallon of RTV, and stuff is so ghetto rigged its scary. The worst was the crank gear key, was just a shaved down piece of metal to "Fit". And everything is 10x harder to pull off because instead of gasket material they just slathered it in RTV. Rusty, Ghostvette and Baronsmokes like this. __________________ Kansei Corsa \| Endless \| Winmax \| Hotchkis \| ISR Performance \| SPL Parts \| Voodoo13 \|Sabelt \| PowerTrix \| Corner 3 \|

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
The New "What did you do with your Z today" (with off topic replies) XXVIII	JARblue	The Lounge (Off Topic)	10014	04-26-2018 11:07 AM
The New "What did you do with your Z today" (with off topic replies) XXVII	JARblue	The Lounge (Off Topic)	9999	11-26-2017 08:08 AM
The New "What did you do with your Z today" (with off topic replies) XXVI	JARblue	The Lounge (Off Topic)	10020	04-23-2017 12:37 PM
The New "What did you do with your Z today" (with off topic replies) XXIII	eastwest2300	The Lounge (Off Topic)	10001	06-23-2016 10:21 AM
The New "What did you do with your Z today" (with off topic replies) VIII	JARblue	The Lounge (Off Topic)	10016	11-10-2013 12:21 PM