The New "What did you do with your Z today" (with off topic replies) XXIX

madwi · 06-30-2018, 03:56 PM

Gosh darn it is hot. About to spontaneously combust.

Rusty · 06-30-2018, 04:14 PM

Quote:

Originally Posted by madwi

If I had to do it again I would for sure have 12’6” min. High ceiling.

The way I would do it. 13ft ceiling. 6", 5000 psi, fiber reinforced, rebarred concrete floor. For where the posts would sit. That area would be a 2ft square, 2ft deep, with 2 layers of rebar. The posts would be anchored with L bolts in the concrete. The L bolts would be 20" long. Having 2" sticking out to mount the posts to. The 2ft squares would be poured first. Let them set-up. Then pour the rest of the floor. The 2ft squares and floor would be the same level.

madwi · 06-30-2018, 04:27 PM

Quote:

Originally Posted by Rusty

The way I would do it. 13ft ceiling. 6", 5000 psi, fiber reinforced, rebarred concrete floor. For where the posts would sit. That area would be a 2ft square, 2ft deep, with 2 layers of rebar. The posts would be anchored with L bolts in the concrete. The L bolts would be 20" long. Having 2" sticking out to mount the posts to. The 2ft squares would be poured first. Let them set-up. Then pour the rest of the floor. The 2ft squares and floor would be the same level.

Going to be lifting garbage trucks or the motorhome?

Leingod · 06-30-2018, 04:57 PM

98f here. Just finished our mid year golf tournament. Won $60 on a skin and place third. Now to go enjoy some ice cold beers and a rack of ribs.

Rusty · 06-30-2018, 05:36 PM

Quote:

Originally Posted by madwi

Going to be lifting garbage trucks or the motorhome?

No, just my 7,500 lb Power Wagon. I want a good secure base. Ever see what happens when your vehicle is not balanced on a twin post lift with shallow mounting.

"in most cases manufacturers indicate a two post lift needs a MINIMUM of 6"-to 8" of concrete floor thickness and a minimum of 3600 psi concrete with 6"-8" anchor bolts to effectively and safely anchor a two post lift."

http://garage.grumpysperformance.com...-your-shop.98/

BoneZ · 06-30-2018, 05:51 PM

Quote:

Originally Posted by madwi

If I had to do it again I would for sure have 12’6” min. High ceiling.

I could build something like this.

madwi · 06-30-2018, 05:54 PM

Quote:

Originally Posted by BoneZ

I could build something like this.

Ive seen special trusses built for a cathedral type ceiling above the lift area.

BoneZ · 06-30-2018, 05:58 PM

Quote:

Originally Posted by madwi

Ive seen special trusses built for a cathedral type ceiling above the lift area.

Just as long as I have enough room to get a Quest up in the air.

Rusty · 06-30-2018, 06:53 PM

My ideal garage would 60ft long x 50 ft deep.

50ft deep would handle my 41ft motorhome. Where the motorhome would be. I need a 14ft tall door, 12ft wide. I would need a 15ft ceiling. I would install a 120v, 50 amp hook-up, sewage drop, and water line on the left side of the motorhome. This way. I could hook-up the motorhome and live in it if I had to while parked in the garage.

This bay would be on the right side of the garage.

The rest of the garage. 2, 10ft x 10ft doors. 2, 40" wide man doors. 40" doors are so much better then the standard 36". I put one in my garage in the house. Between the garage and basement already.

Ceiling of 12ft. 1 twin post lift, and 1, Hunter 4 post alignment rack. Think the wiring would be 480volt coming in. That would handle any welder, Bridgeport, or lathe, 400 gal air compressor, etc. I would run metal pipe air lines everywhere. Including to the outside. The same with electrical outlets. Lighting would be everywhere. Would have 2, 8ftx4ft, 48" high tables made out out steel. The tops would be 1/2"thick. One 4ftx4ft, 48" high table with wheels on the bottom. one 4ftx4ft, 24" high table. This one is for tall things.

HVAC. Gas heat. Also would be a wood burning stove. Power goes out. At least I can cook on it. Have about 5 ceiling fans to move the air. Where I would be welding. Have a exhaust fan to the outside to remove the welding flumes.

This almost the same design I did for the power plant when we was building it. Minus the Hunter alignment rack, and wood burning stove.

And the little 4ton overhead crane.

Leingod · 06-30-2018, 07:29 PM

Oh wow. Wicked sunburnt

Rusty · 06-30-2018, 07:49 PM

Quote:

Originally Posted by Leingod

Oh wow. Wicked sunburnt

Azzmole. Where's your sunscreen?

Rusty · 06-30-2018, 07:53 PM

Shot a couple of 95 9X's today. Used my carry pistol. M&P 40 S&W with the 4.25" barrel. Been awhile since I have been to the range.

Leingod · 06-30-2018, 09:34 PM

Quote:

Originally Posted by Rusty

Azzmole. Where's your sunscreen?

Spf 75 applied 3 times over the course of 6 hours. Damn my polish genes...

jchammond · 06-30-2018, 09:45 PM

Quote:

Originally Posted by Leingod

Spf 75 applied 3 times over the course of 6 hours. Damn my polish genes...

Heard a recent story about 3 guy’s following tracks & bringing back deer,,,you must be the one who followed tracks & got hit by a train!

BoneZ · 06-30-2018, 09:51 PM

Quote:

Originally Posted by Rusty

My ideal garage would 60ft long x 50 ft deep.

50ft deep would handle my 41ft motorhome. Where the motorhome would be. I need a 14ft tall door, 12ft wide. I would need a 15ft ceiling. I would install a 120v, 50 amp hook-up, sewage drop, and water line on the left side of the motorhome. This way. I could hook-up the motorhome and live in it if I had to while parked in the garage.

This bay would be on the right side of the garage.

The rest of the garage. 2, 10ft x 10ft doors. 2, 40" wide man doors. 40" doors are so much better then the standard 36". I put one in my garage in the house. Between the garage and basement already.

Ceiling of 12ft. 1 twin post lift, and 1, Hunter 4 post alignment rack. Think the wiring would be 480volt coming in. That would handle any welder, Bridgeport, or lathe, 400 gal air compressor, etc. I would run metal pipe air lines everywhere. Including to the outside. The same with electrical outlets. Lighting would be everywhere. Would have 2, 8ftx4ft, 48" high tables made out out steel. The tops would be 1/2"thick. One 4ftx4ft, 48" high table with wheels on the bottom. one 4ftx4ft, 24" high table. This one is for tall things.

HVAC. Gas heat. Also would be a wood burning stove. Power goes out. At least I can cook on it. Have about 5 ceiling fans to move the air. Where I would be welding. Have a exhaust fan to the outside to remove the welding flumes.

This almost the same design I did for the power plant when we was building it. Minus the Hunter alignment rack, and wood burning stove.

And the little 4ton overhead crane.

That might be ok I guess.

06-30-2018, 03:56 PM	#4861 (permalink)
madwi A True Z Fanatic Join Date: Sep 2012 Location: West Michigan Posts: 31,410 Drives: Granma red Z Rep Power: 2684429	Gosh darn it is hot. About to spontaneously combust. b15 likes this.

06-30-2018, 04:57 PM	#4864 (permalink)
Leingod A True Z Fanatic Join Date: Mar 2015 Location: Some Place Cold Posts: 16,060 Drives: In Circles Rep Power: 2684396	98f here. Just finished our mid year golf tournament. Won $60 on a skin and place third. Now to go enjoy some ice cold beers and a rack of ribs. __________________ I AM FLOOF! SOMEBODY FLOOF MY HORN!! ALL HAIL THE FLOOF!!I JUST FLOOFED ON THE FLOOR

06-30-2018, 06:53 PM	#4869 (permalink)
Rusty Ronin Samurai - Assassin Join Date: Dec 2011 Location: Fayettenam,Pennsyltucky Age: 68 Posts: 35,189 Drives: 2011 Nismo GM 6M Rep Power: 2684437	My ideal garage would 60ft long x 50 ft deep. 50ft deep would handle my 41ft motorhome. Where the motorhome would be. I need a 14ft tall door, 12ft wide. I would need a 15ft ceiling. I would install a 120v, 50 amp hook-up, sewage drop, and water line on the left side of the motorhome. This way. I could hook-up the motorhome and live in it if I had to while parked in the garage. This bay would be on the right side of the garage. The rest of the garage. 2, 10ft x 10ft doors. 2, 40" wide man doors. 40" doors are so much better then the standard 36". I put one in my garage in the house. Between the garage and basement already. Ceiling of 12ft. 1 twin post lift, and 1, Hunter 4 post alignment rack. Think the wiring would be 480volt coming in. That would handle any welder, Bridgeport, or lathe, 400 gal air compressor, etc. I would run metal pipe air lines everywhere. Including to the outside. The same with electrical outlets. Lighting would be everywhere. Would have 2, 8ftx4ft, 48" high tables made out out steel. The tops would be 1/2"thick. One 4ftx4ft, 48" high table with wheels on the bottom. one 4ftx4ft, 24" high table. This one is for tall things. HVAC. Gas heat. Also would be a wood burning stove. Power goes out. At least I can cook on it. Have about 5 ceiling fans to move the air. Where I would be welding. Have a exhaust fan to the outside to remove the welding flumes. This almost the same design I did for the power plant when we was building it. Minus the Hunter alignment rack, and wood burning stove. And the little 4ton overhead crane. Ghostvette, jchammond and old guy like this. __________________ 浪人 - 殺し屋 "The Difficult Anytime, The Impossible By Appointment Only" http://www.the370z.com/members-370z-...o-journal.html Last edited by Rusty; 06-30-2018 at 06:57 PM.

06-30-2018, 07:29 PM	#4870 (permalink)
Leingod A True Z Fanatic Join Date: Mar 2015 Location: Some Place Cold Posts: 16,060 Drives: In Circles Rep Power: 2684396	Oh wow. Wicked sunburnt __________________ I AM FLOOF! SOMEBODY FLOOF MY HORN!! ALL HAIL THE FLOOF!!I JUST FLOOFED ON THE FLOOR

06-30-2018, 07:53 PM	#4872 (permalink)
Rusty Ronin Samurai - Assassin Join Date: Dec 2011 Location: Fayettenam,Pennsyltucky Age: 68 Posts: 35,189 Drives: 2011 Nismo GM 6M Rep Power: 2684437	Shot a couple of 95 9X's today. Used my carry pistol. M&P 40 S&W with the 4.25" barrel. Been awhile since I have been to the range. JLarson likes this. __________________ 浪人 - 殺し屋 "The Difficult Anytime, The Impossible By Appointment Only" http://www.the370z.com/members-370z-...o-journal.html

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
The New "What did you do with your Z today" (with off topic replies) XXVIII	JARblue	The Lounge (Off Topic)	10014	04-26-2018 11:07 AM
The New "What did you do with your Z today" (with off topic replies) XXVII	JARblue	The Lounge (Off Topic)	9999	11-26-2017 08:08 AM
The New "What did you do with your Z today" (with off topic replies) XXVI	JARblue	The Lounge (Off Topic)	10020	04-23-2017 12:37 PM
The New "What did you do with your Z today" (with off topic replies) XXIII	eastwest2300	The Lounge (Off Topic)	10001	06-23-2016 10:21 AM
The New "What did you do with your Z today" (with off topic replies) VIII	JARblue	The Lounge (Off Topic)	10016	11-10-2013 12:21 PM