The New "What did you do with your Z today" (with off topic replies) XXVIII

Leingod · 04-02-2018, 01:26 PM

Quote:

Originally Posted by eastwest2300

Ok. Thinking about the plan of attack for everything.

I arrive Friday morning. Rest for a few hours. We get cranking on stuff whenever everyone is available Friday evening.

Friday:
Remove bumper, mess around will cooler and intake.
PB blast the hell out of bolts and remove as much exhaust as possible
Madwi/Susan can work on diffuser, side blades, fairlady badge, and bt-r button

Saturday: We exorcise the demon bolts. Put HFC's and Exhaust on. Finish intake and oil cooler. While we do under car stuff, Susan can contort herself with Madwi supervising the RJM clutch assembly.

Sunday: Any final touch ups like loading a quick tune, vinyl wrap pillars, etc. Can go for a cruise and get some photos around the lake.

Monday: I sleep like the dead

eastwest2300 · 04-02-2018, 01:36 PM

Quote:

Originally Posted by Leingod

Ok. Thinking about the plan of attack for everything.

I arrive Friday morning. Rest for a few hours. We get cranking on stuff whenever everyone is available Friday evening.

Friday:
Remove bumper, mess around will cooler and intake.
PB blast the hell out of bolts and remove as much exhaust as possible
Madwi/Susan can work on diffuser, side blades, fairlady badge, and bt-r button

Saturday: We exorcise the demon bolts. Put HFC's and Exhaust on. Finish intake and oil cooler. While we do under car stuff, Susan can contort herself with Madwi supervising the RJM clutch assembly.

Sunday: Any final touch ups like loading a quick tune, vinyl wrap pillars, etc. Can go for a cruise and get some photos around the lake.

Monday: I sleep like the dead

Is your Z automatic or manual? and do you have the oem shift knob on it? (if its manual)

eastwest2300 · 04-02-2018, 01:37 PM

And you're right about that, it'll be all hands on deck at this point. Your driver's seat will have to come out once the car is on jackstands.

Leingod · 04-02-2018, 01:44 PM

Quote:

Originally Posted by eastwest2300

And you're right about that, it'll be all hands on deck at this point. Your driver's seat will have to come out once the car is on jackstands.

Can take the seat out before jack stands. Shouldn't be to difficult. I get weary when things are on stands and access to the interior is needed.

Madwi has the same exact oil cooler as well. So we can do a simple stare and compare if desperate. haha.

blades and diffuser will take all of an hour. GT-R button I'll just throw to my girlfriend and she can use her phone to figure out how to pry off the backplate. lol.

With the 2 of us under the car, I don't foresee to many issues with the exhaust going into place. Only main concern is making sure we don't over tighten incase we need to realign the tips to be even.

HFC's I have no clue how bad they'll be. And intakes I am assuming can be slightly tricky.

Leingod · 04-02-2018, 01:45 PM

I already bought 2 cases of red bulls. You've yet to see a strung out IT guy going ham on stuff with the excitement of a 2 year old getting his first tickle me elmo.

eastwest2300 · 04-02-2018, 01:55 PM

Quote:

Originally Posted by Leingod

Can take the seat out before jack stands. Shouldn't be to difficult. I get weary when things are on stands and access to the interior is needed.

Madwi has the same exact oil cooler as well. So we can do a simple stare and compare if desperate. haha.

blades and diffuser will take all of an hour. GT-R button I'll just throw to my girlfriend and she can use her phone to figure out how to pry off the backplate. lol.

With the 2 of us under the car, I don't foresee to many issues with the exhaust going into place. Only main concern is making sure we don't over tighten incase we need to realign the tips to be even.

HFC's I have no clue how bad they'll be. And intakes I am assuming can be slightly tricky.

The thing that takes the longest with the exhaust is getting the factory rubber flanges from the oem exhaust's mounting points.. last time we used a lubricant to get them to slide off.

eastwest2300 · 04-02-2018, 01:56 PM

brb, im off to lunch.. ahhhhhh.

Leingod · 04-02-2018, 01:58 PM

Quote:

Originally Posted by eastwest2300

The thing that takes the longest with the exhaust is getting the factory rubber flanges from the oem exhaust's mounting points.. last time we used a lubricant to get them to slide off.

Where are the rubber things located? I wasn't aware of this. I currently have a STM axle back on the rear end. The OEM exhaust is chilling on my porch right now.

If those rubber things are where you "hang" parts of the exhaust, I got them off easily last time. But the tips were uneven so I ended up adding copious amounts of washers to even things out.

JLarson · 04-02-2018, 02:13 PM

Quote:

Originally Posted by eastwest2300

The thing that takes the longest with the exhaust is getting the factory rubber flanges from the oem exhaust's mounting points.. last time we used a lubricant to get them to slide off.

Get exhaust hangar pliers if you don't have them already. Makes that a cakewalk.

https://www.amazon.com/Lang-Tools-43...+hanger+pliers

Something like that.

eastwest2300 · 04-02-2018, 03:02 PM

Quote:

Originally Posted by Leingod

Where are the rubber things located? I wasn't aware of this. I currently have a STM axle back on the rear end. The OEM exhaust is chilling on my porch right now.

If those rubber things are where you "hang" parts of the exhaust, I got them off easily last time. But the tips were uneven so I ended up adding copious amounts of washers to even things out.

thats it! thats what I was talking about.. I couldnt come up with the technical name for them

eastwest2300 · 04-02-2018, 03:03 PM

Quote:

Originally Posted by JLarson

Get exhaust hangar pliers if you don't have them already. Makes that a cakewalk.

https://www.amazon.com/Lang-Tools-43...+hanger+pliers

Something like that.

hell yeah! if it makes life easier... im with it 1000%

Leingod · 04-02-2018, 03:04 PM

Quote:

Originally Posted by eastwest2300

thats it! thats what I was talking about.. I couldnt come up with the technical name for them

I'll order the thing on Amazon that Larson recommended. Can't hurt to try.

JLarson · 04-02-2018, 03:40 PM

Quote:

Originally Posted by Leingod

I'll order the thing on Amazon that Larson recommended. Can't hurt to try.

I'd try hard to avoid doing an exhaust without them. Let me know your thoughts after you've tried. They even worked on my ancient 300zx with everything rusted to hell.

eastwest2300 · 04-02-2018, 03:40 PM

so mr. leingod... here's my list for you.. 5 quarts of your favorite motor oil, and oil filter to fit, a couple tarps or blankets (to catch spills), 2 pairs (one for you and your gf) of cheap gloves (you can get them at harbor freight) because latex will NOT protect your hands from cuts & bruises and.... hmmmm, thats it for now.

ohh and, some clothes you can get dirty/oil in.. that you'll throw away before you drive back.

eastwest2300 · 04-02-2018, 03:40 PM

Quote:

Originally Posted by JLarson

I'd try hard to avoid doing an exhaust without them. Let me know your thoughts after you've tried. They even worked on my ancient 300zx with everything rusted to hell.

this thing sounds beautiful...

04-02-2018, 01:37 PM	#7878 (permalink)
eastwest2300 A True Z Fanatic Join Date: May 2010 Location: South FL Posts: 90,973 Drives: '16QX70/'21 Supra3.0 Rep Power: 2684550	And you're right about that, it'll be all hands on deck at this point. Your driver's seat will have to come out once the car is on jackstands. __________________ Infiniti QX70 & Toyota Supra 3.0 Premium

04-02-2018, 01:45 PM	#7880 (permalink)
Leingod A True Z Fanatic Join Date: Mar 2015 Location: Some Place Cold Posts: 16,060 Drives: In Circles Rep Power: 2684396	I already bought 2 cases of red bulls. You've yet to see a strung out IT guy going ham on stuff with the excitement of a 2 year old getting his first tickle me elmo. eastwest2300 and Rusty like this. __________________ I AM FLOOF! SOMEBODY FLOOF MY HORN!! ALL HAIL THE FLOOF!!I JUST FLOOFED ON THE FLOOR

04-02-2018, 01:56 PM	#7882 (permalink)
eastwest2300 A True Z Fanatic Join Date: May 2010 Location: South FL Posts: 90,973 Drives: '16QX70/'21 Supra3.0 Rep Power: 2684550	brb, im off to lunch.. ahhhhhh. __________________ Infiniti QX70 & Toyota Supra 3.0 Premium

04-02-2018, 03:40 PM	#7889 (permalink)
eastwest2300 A True Z Fanatic Join Date: May 2010 Location: South FL Posts: 90,973 Drives: '16QX70/'21 Supra3.0 Rep Power: 2684550	so mr. leingod... here's my list for you.. 5 quarts of your favorite motor oil, and oil filter to fit, a couple tarps or blankets (to catch spills), 2 pairs (one for you and your gf) of cheap gloves (you can get them at harbor freight) because latex will NOT protect your hands from cuts & bruises and.... hmmmm, thats it for now. ohh and, some clothes you can get dirty/oil in.. that you'll throw away before you drive back. __________________ Infiniti QX70 & Toyota Supra 3.0 Premium

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
The New "What did you do with your Z today" (with off topic replies) XXVII	JARblue	The Lounge (Off Topic)	9999	11-26-2017 08:08 AM
The New "What did you do with your Z today" (with off topic replies) XXIV	JARblue	The Lounge (Off Topic)	10059	08-17-2016 01:08 PM
The New "What did you do with your Z today" (with off topic replies) XXIII	eastwest2300	The Lounge (Off Topic)	10001	06-23-2016 10:21 AM
The New "What did you do with your Z today" (with off topic replies) XXII	eastwest2300	The Lounge (Off Topic)	10001	04-05-2016 09:15 PM
The New "What did you do with your Z today" (with off topic replies) XVIII	eastwest2300	The Lounge (Off Topic)	10000	07-09-2015 08:48 PM