The New "What did you do with your Z today" (with off topic replies) XXVIII

madwi · 03-19-2018, 06:45 PM

Quote:

Originally Posted by Rusty

Well...............................take a look at you 3.

There will be bull chitting, drinking, eating, story telling, and the demon bolts. What more of a mix for a disaster you want?

I take supervising very seriously. They will be working hard.

Rusty · 03-19-2018, 06:51 PM

Quote:

Originally Posted by madwi

My fat *** along with the breaker bar, 1/2" extensions and pb blaster, we should be ok.

Now, I'm worry. Make that a 8ft section of pipe. And a 3/4 drive breaker bar.

Remember to remove the O2 sensors first thing before doing ANY work on the exhaust.

madwi · 03-19-2018, 07:27 PM

Quote:

Originally Posted by Rusty

Now, I'm worry. Make that a 8ft section of pipe. And a 3/4 drive breaker bar.

Remember to remove the O2 sensors first thing before doing ANY work on the exhaust.

I have 02 sensor sockets.

Leingod · 03-19-2018, 07:27 PM

I think Rusty is jealous

Leingod · 03-19-2018, 07:30 PM

Would this thing work?

madwi · 03-19-2018, 07:31 PM

Quote:

Originally Posted by Leingod

I plan to get started early Sat morning.

Me and you: hfc's first, exhaust, intakes. In that order.

Madwi: Diffuser, side blades, randoms tuff

girlfriend: Madwi helps her with the clutch pedal and let her do vinyl wrappings for the b-pillars.

I'll confirm with him if anything else is needed and order stuff. I'd rather order the stuff and be safe instead of being screwed the morning of.

I am thinking of getting the car on stands Friday. You guys can take my Fit to the hotel or where ever you are staying. I can work on the Z during the night a bit. I should be able to knock out the side blades and diffuser while you all are sleeping. This should open up Saturday to focusing on the intakes/exhaust/rjm pedal. When are you guys departing for home?

madwi · 03-19-2018, 07:33 PM

Quote:

Originally Posted by Leingod

Would this thing work?

I have all the stuff needed but yes, that would be a decent tool to use with all the extensions, breaker bars.

Leingod · 03-19-2018, 07:35 PM

Quote:

Originally Posted by madwi

I am thinking of getting the car on stands Friday. You guys can take my Fit to the hotel or where ever you are staying. I can work on the Z during the night a bit. I should be able to knock out the side blades and diffuser while you all are sleeping. This should open up Saturday to focusing on the intakes/exhaust/rjm pedal. When are you guys departing for home?

At some point Sunday. Depends on whenever we are comfortable all work is done and stable for 600 miles back home. If needed though, we could drive back Monday.

I could ask, but maybe we could leave Thursday evening and arrive late at night Friday. We should conference call this with EW to just settle on something. lol

Leingod · 03-19-2018, 07:41 PM

Ok. I spoke it over with the GF. We will leave after work on Thursday. If I make the 10 hour drive straight, great. If not, i'll call it a night and get to your place by noon on Friday. That would give us most of the day Friday and all of Saturday to wrench. Can get breakfast Sunday and we will head back home.

madwi · 03-19-2018, 07:43 PM

Quote:

Originally Posted by Leingod

Ok. I spoke it over with the GF. We will leave after work on Thursday. If I make the 10 hour drive straight, great. If not, i'll call it a night and get to your place by noon on Friday. That would give us most of the day Friday and all of Saturday to wrench. Can get breakfast Sunday and we will head back home.

600 miles = 10 hours? You drive like a ******* grandpa?

80mph when you hit MI.

madwi · 03-19-2018, 07:44 PM

Says about a 9 hour drive. should be able to cut that down a bit when you hit MI and can do 80. Stupid ohio and their slow asses.

madwi · 03-19-2018, 07:45 PM

Looks like if you bring your passports, cut across Canada you can cut some travel time off!

Leingod · 03-19-2018, 07:55 PM

Quote:

Originally Posted by madwi

Looks like if you bring your passports, cut across Canada you can cut some travel time off!

Girlfriend doesn't have a passport. I wish we could cut through Canada. From my house to tour house has Google at 10 and a half hours. I just stick cruise control on at 70 and call it a day. I'm in no rush to save an hour.

Idk about doing 80 in Michigan. 1 pothole and it's game over.

madwi · 03-19-2018, 08:03 PM

Quote:

Originally Posted by Leingod

Girlfriend doesn't have a passport. I wish we could cut through Canada. From my house to tour house has Google at 10 and a half hours. I just stick cruise control on at 70 and call it a day. I'm in no rush to save an hour.

Idk about doing 80 in Michigan. 1 pothole and it's game over.

you will get run the **** over if you dont do at least 80 in Mi

Rusty · 03-19-2018, 08:04 PM

Quote:

Originally Posted by Leingod

I think Rusty is jealous

Not really. I'm waiting on my banjo fitting to show up tomorrow. I'm tired of working on the Z. I want to drive it.

Haven't driven it since last July.

03-19-2018, 07:27 PM	#6889 (permalink)
Leingod A True Z Fanatic Join Date: Mar 2015 Location: Some Place Cold Posts: 16,060 Drives: In Circles Rep Power: 2684396	I think Rusty is jealous Rusty likes this. __________________ I AM FLOOF! SOMEBODY FLOOF MY HORN!! ALL HAIL THE FLOOF!!I JUST FLOOFED ON THE FLOOR

03-19-2018, 07:30 PM	#6890 (permalink)
Leingod A True Z Fanatic Join Date: Mar 2015 Location: Some Place Cold Posts: 16,060 Drives: In Circles Rep Power: 2684396	Would this thing work? onzedge likes this. __________________ I AM FLOOF! SOMEBODY FLOOF MY HORN!! ALL HAIL THE FLOOF!!I JUST FLOOFED ON THE FLOOR

03-19-2018, 07:41 PM	#6894 (permalink)
Leingod A True Z Fanatic Join Date: Mar 2015 Location: Some Place Cold Posts: 16,060 Drives: In Circles Rep Power: 2684396	Ok. I spoke it over with the GF. We will leave after work on Thursday. If I make the 10 hour drive straight, great. If not, i'll call it a night and get to your place by noon on Friday. That would give us most of the day Friday and all of Saturday to wrench. Can get breakfast Sunday and we will head back home. eastwest2300 likes this. __________________ I AM FLOOF! SOMEBODY FLOOF MY HORN!! ALL HAIL THE FLOOF!!I JUST FLOOFED ON THE FLOOR

03-19-2018, 07:45 PM	#6897 (permalink)
madwi A True Z Fanatic Join Date: Sep 2012 Location: West Michigan Posts: 31,410 Drives: Granma red Z Rep Power: 2684429	Looks like if you bring your passports, cut across Canada you can cut some travel time off! JARblue likes this.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
The New "What did you do with your Z today" (with off topic replies) XXVII	JARblue	The Lounge (Off Topic)	9999	11-26-2017 08:08 AM
The New "What did you do with your Z today" (with off topic replies) XXIV	JARblue	The Lounge (Off Topic)	10059	08-17-2016 01:08 PM
The New "What did you do with your Z today" (with off topic replies) XXIII	eastwest2300	The Lounge (Off Topic)	10001	06-23-2016 10:21 AM
The New "What did you do with your Z today" (with off topic replies) XXII	eastwest2300	The Lounge (Off Topic)	10001	04-05-2016 09:15 PM
The New "What did you do with your Z today" (with off topic replies) XVIII	eastwest2300	The Lounge (Off Topic)	10000	07-09-2015 08:48 PM

03-19-2018, 07:44 PM	#6896 (permalink)
madwi A True Z Fanatic Join Date: Sep 2012 Location: West Michigan Posts: 31,410 Drives: Granma red Z Rep Power: 2684429	Says about a 9 hour drive. should be able to cut that down a bit when you hit MI and can do 80. Stupid ohio and their slow asses.