The New "What did you do with your Z today" (with off topic replies) XXIII

Leingod · 04-27-2016, 11:49 AM

Quote:

Originally Posted by kenchan

at least on the Z there is good distance between the engine oil plug and tranny oil plug and use different tool bits. on some subaru's ive worked on it is like they are right next to each other so ive seen folks drain their tranny fluid instead of their engine oil.

wtf..

That's what I am petrified of doing some day. I quad checked myself 5 times when doing the GF's versa oil change. I'm a freaking hypochondriac still it seems.

kenchan · 04-27-2016, 11:51 AM

Quote:

Originally Posted by Leingod

That's what I am petrified of doing some day. I quad checked myself 5 times when doing the GF's versa oil change. I'm a freaking hypochondriac still it seems.

its good to be on the nervous side. things are most dangerous for sophomore types dat think they know wat they're doing and fak up. those are usually da kids dat work at them jiffy lubes and such.

kenchan · 04-27-2016, 11:52 AM

also at dealer quick change bays. those are usually just novice teens non-ASE certified folks doing the work.

not dat u need such certification to do routine maintenance.

Leingod · 04-27-2016, 11:56 AM

Quote:

Originally Posted by kenchan

also at dealer quick change bays. those are usually just novice teens non-ASE certified folks doing the work.

not dat u need such certification to do routine maintenance.

Well hopefully this manual helps me. $100 for full radiator hose swap from Z1. I'm tempted.

Leingod · 04-27-2016, 12:00 PM

I now know what burping the coolant means!! One a 50/50 blend is added, turn the car on and blast the heat. With the funnel and coolant still in the funnel, it should burp out bubbles being flushed from the hoses.

kenchan · 04-27-2016, 12:03 PM

Quote:

Originally Posted by Leingod

I now know what burping the coolant means!! One a 50/50 blend is added, turn the car on and blast the heat. With the funnel and coolant still in the funnel, it should burp out bubbles being flushed from the hoses.

yep. the nissan coolant is already pre-mixed so u dont need to add any distilled water. just pour in slowly. there is an air release valve on the driver side of the radiator if u want to use it. fill till coolant spills out.

but i dont like the smell of burnt coolant and didnt feel like washing the engine bay after the engine was cold again so did not use the air release valve. it took a good 45min to burp the system.

kenchan · 04-27-2016, 12:05 PM

Quote:

Originally Posted by Leingod

Well hopefully this manual helps me. $100 for full radiator hose swap from Z1. I'm tempted.

i never understood the point of swapping the hoses on a street driven car, but yah they do look cool.

Leingod · 04-27-2016, 12:07 PM

Quote:

Originally Posted by kenchan

yep. the nissan coolant is already pre-mixed so u dont need to add any distilled water. just pour in slowly. there is an air release valve on the driver side of the radiator if u want to use it. fill till coolant spills out.

but i dont like the smell of burnt coolant and didnt feel like washing the engine bay after the engine was cold again so did not use the air release valve. it took a good 45min to burp the system.

I seriously may have to try this now. And then bleed the brakes some day. That truly terrifies me. I know it's just a nipple on the calipers, but still.

Leingod · 04-27-2016, 12:08 PM

Quote:

Originally Posted by kenchan

i never understood the point of swapping the hoses on a street driven car, but yah they do look cool.

It's only $100 and it's the coolness factor. That's literally it. And spending the money will force me to eventually do the install myself.

BoneZ · 04-27-2016, 12:09 PM

Somebody brought in wrathy grapes for us to eat today.

Leingod · 04-27-2016, 12:10 PM

Really wish one of you guys was even remotely close to teach me the basics. Would make my life so much easier haha.

kenchan · 04-27-2016, 12:13 PM

Quote:

Originally Posted by Leingod

I seriously may have to try this now. And then bleed the brakes some day. That truly terrifies me. I know it's just a nipple on the calipers, but still.

yah, brakes imho is a tad harder dan coolant as u dont want to introduce new air into the system. if u use an extractor it will make it a lot easier dan pumping the brake pedal.. plus u can do it urself at a controlled extraction rate.

a lot of folks use the pump dat pressurizes from the reservoir side. some just use gravity.. meaning no tools, just loosen the nipple and allow brake fluid to slowly drain out while u add new fluid. it works but will take a very long time to do..

and i worry the new fluid will absorb too much moisture while u have the cap off.

kenchan · 04-27-2016, 12:16 PM

i usually have my younger kid monitor the brake reservoir level while i do the extraction on the opposite side of the car.

kenchan · 04-27-2016, 12:24 PM

dogdamn, i had to turn the heat on my house... frikken chilly out dere today..

my tires are

due to temp change of close to 40F in one day..

Leingod · 04-27-2016, 12:31 PM

Quote:

Originally Posted by kenchan

dogdamn, i had to turn the heat on my house... frikken chilly out dere today..

my tires are

due to temp change of close to 40F in one day..

Same. Frost everywhere and very cold tires.

04-27-2016, 12:00 PM	#4880 (permalink)
Leingod A True Z Fanatic Join Date: Mar 2015 Location: Some Place Cold Posts: 16,060 Drives: In Circles Rep Power: 2684396	I now know what burping the coolant means!! One a 50/50 blend is added, turn the car on and blast the heat. With the funnel and coolant still in the funnel, it should burp out bubbles being flushed from the hoses. __________________ I AM FLOOF! SOMEBODY FLOOF MY HORN!! ALL HAIL THE FLOOF!!I JUST FLOOFED ON THE FLOOR

04-27-2016, 12:09 PM	#4885 (permalink)
BoneZ A True Z Fanatic Join Date: May 2015 Location: Atlanta, GA Age: 53 Posts: 9,299 Drives: 2012 Blue BallZ Rep Power: 2684382	Somebody brought in wrathy grapes for us to eat today. __________________ *“Happiness is having a large, loving, caring, close-knit family in another city.”*-George Burns

04-27-2016, 12:10 PM	#4886 (permalink)
Leingod A True Z Fanatic Join Date: Mar 2015 Location: Some Place Cold Posts: 16,060 Drives: In Circles Rep Power: 2684396	Really wish one of you guys was even remotely close to teach me the basics. Would make my life so much easier haha. __________________ I AM FLOOF! SOMEBODY FLOOF MY HORN!! ALL HAIL THE FLOOF!!I JUST FLOOFED ON THE FLOOR

04-27-2016, 12:24 PM	#4889 (permalink)
kenchan A True Z Fanatic Join Date: Aug 2009 Location: N/A Posts: 76,801 Drives: N/A Rep Power: 141521	dogdamn, i had to turn the heat on my house... frikken chilly out dere today.. my tires are due to temp change of close to 40F in one day.. Masterbeatty and madwi like this.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
The New "What did you do with your Z today" (with off topic replies) XXII	eastwest2300	The Lounge (Off Topic)	10001	04-05-2016 09:15 PM
The New "What did you do with your Z today" (with off topic replies) XVIV	eastwest2300	The Lounge (Off Topic)	10005	09-11-2015 09:57 AM
The New "What did you do with your Z today" (with off topic replies) XVIII	eastwest2300	The Lounge (Off Topic)	10000	07-09-2015 08:48 PM
The New "What did you do with your Z today" (with off topic replies) XIII	JARblue	The Lounge (Off Topic)	10011	08-04-2014 05:16 PM
The New "What did you do with your Z today" (with off topic replies) VIII	JARblue	The Lounge (Off Topic)	10016	11-10-2013 12:21 PM

04-27-2016, 11:52 AM	#4878 (permalink)
kenchan A True Z Fanatic Join Date: Aug 2009 Location: N/A Posts: 76,801 Drives: N/A Rep Power: 141521	also at dealer quick change bays. those are usually just novice teens non-ASE certified folks doing the work. not dat u need such certification to do routine maintenance.

04-27-2016, 12:16 PM	#4888 (permalink)
kenchan A True Z Fanatic Join Date: Aug 2009 Location: N/A Posts: 76,801 Drives: N/A Rep Power: 141521	i usually have my younger kid monitor the brake reservoir level while i do the extraction on the opposite side of the car.