OS Giken RB30 on sale @@

J-Tune · 01-20-2010, 04:14 PM

OS Giken is running a special on the RB30

Part# NS201-FA: RB30 kit (OS-E2996)

MSRP $19,990.00

NOW $18990.50

The RB30 kit comes with:

- 1 cylinder block (spacer, liner, piston cooler and oil orifice are factory fitted)

- 1 billet chome-molybdenum Crankshaft

- 6 billet-forged, chome-molybdenum H-shaped connecting rods

- 7 crankshaft (main) bearings

- 6 connecting rod (big-end) bearings

- 6 forged aluminum pistons (includes linings, pins, and snap-rings)

- 1.3mm metal head gasket (1.2mm, 1.4mm, 1.5mm gaskets are also available)

- 1 timing belt (adjustable cam pulley is optional)

- 1 belt tensioner kit

- 14 specially produced, reinforced head stud bolts

- 14 specially produced, reinforced crank cap stuff bolts and nuts

- 3 M6 bolts

- And a partridge in a pear tree (extra fee applies)

Crankshaft, pistons, and connecting rods are factory fitted to the cylinder. Also, an OS clutch is required for use with the RB30 kit (specific fitment; the crankshaft has an 8-hole fitting for the flywheel)[

01-20-2010, 04:14 PM	#1 (permalink)
J-Tune The370Z.com Sponsor Join Date: Nov 2009 Location: Wilmington, Delaware Posts: 100 Drives: Nissan Rep Power: 16	OS Giken RB30 on sale @@ OS Giken is running a special on the RB30 Part# NS201-FA: RB30 kit (OS-E2996) MSRP $19,990.00 NOW $18990.50 The RB30 kit comes with: - 1 cylinder block (spacer, liner, piston cooler and oil orifice are factory fitted) - 1 billet chome-molybdenum Crankshaft - 6 billet-forged, chome-molybdenum H-shaped connecting rods - 7 crankshaft (main) bearings - 6 connecting rod (big-end) bearings - 6 forged aluminum pistons (includes linings, pins, and snap-rings) - 1.3mm metal head gasket (1.2mm, 1.4mm, 1.5mm gaskets are also available) - 1 timing belt (adjustable cam pulley is optional) - 1 belt tensioner kit - 14 specially produced, reinforced head stud bolts - 14 specially produced, reinforced crank cap stuff bolts and nuts - 3 M6 bolts - And a partridge in a pear tree (extra fee applies) Crankshaft, pistons, and connecting rods are factory fitted to the cylinder. Also, an OS clutch is required for use with the RB30 kit (specific fitment; the crankshaft has an 8-hole fitting for the flywheel)[

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
OS Giken Twin Disk Clutches and Limited Slip Differential Sale!	Rob@Altered	Drivetrain/Engine	32	07-05-2011 04:28 PM
240Z - RB30 7.9sec Robbie Ward NZ	GTRFAN	Other Vehicles	0	10-21-2009 09:54 PM
GT Motorsports: OS Giken Drivetrain Products for VQ37VHR	George@GTM	Forced Induction	11	03-09-2009 06:54 PM