Anyone have or seen Popchargers and Post MAF tubes as a Setup?

Nick Servin · 01-09-2015, 09:38 PM

Wondering if anyone has tried JWT Popchargers with post maf tubes as an intake setup?

DavidZ370 · 01-09-2015, 10:18 PM

Lol

Merv · 01-09-2015, 10:19 PM

Ahhh,is there anything in particular you would like to know?

If you go down to the bottom of this page,there's threads that might help you out with what your looking for.

Nick Servin · 01-09-2015, 10:42 PM

Quote:

Originally Posted by DavidZ370

Lol

Nick Servin · 01-09-2015, 10:44 PM

Quote:

Originally Posted by Merv

Ahhh,is there anything in particular you would like to know?

If you go down to the bottom of this page,there's threads that might help you out with what your looking for.

Thankz. I just wanna see this setup seems like everyone has stillens or other metal intakes.

Merv · 01-09-2015, 10:50 PM

Quote:

Originally Posted by Nick Servin

Thankz. I just wanna see this setup seems like everyone has stillens or other metal intakes.

People opt for the "tried tested and true"goodies. Myself included haha! But there's nothing wrong with checking out all that there is out there.

Zoren 370 · 01-09-2015, 11:12 PM

Thought about that too..,why not..try it and give us your review.

Nick Servin · 01-10-2015, 12:11 AM

Quote:

Originally Posted by Merv

People opt for the "tried tested and true"goodies. Myself included haha! But there's nothing wrong with checking out all that there is out there.

Thankz!

Nick Servin · 01-10-2015, 12:22 AM

Quote:

Originally Posted by Zoren 370

Thought about that too..,why not..try it and give us your review.

Seems to me it hasnt been done because it ends up being around $475+ for everything and people rather purchase the stillen gen 3s instead. But Ive read that the stillen gen 3s do not make the same hp tq gains with the bumper on. This setup is in between a short ram and cai without the hot metal tubing. The Popchargers sound so badass too! Im planning on doing the forced air fang mod going to the popchargers and a vented hood to prevent heat soak.

gomer_110 · 01-10-2015, 10:57 AM

Problem with this setup is that it sucks in air from under the hood which is hot as hell when the car is being run hard. The Stillen G3's draw air from outside the engine bay which is going to be colder.

This is the main reason most go with the Stillen G3's or someother long tube intake. There's plenty of threads on this exact issue so just do a search.

SouthArk370Z · 01-10-2015, 12:40 PM

The Popchargers will not increase flow any more than a good OEM-form air filter and will draw in more air from under the hood than the factory setup (see gomer_110's and Nick Servin's comments above). If you want to do any good, you've got to get the coolest air you can. Under the hood is not that place.

The post-MAF tubes will give a little gain but not much. For a DD, not enough to make it worth what they cost, IMNSHO. But they do look nice - if that's your style, go for it.

Nick Servin · 01-10-2015, 03:27 PM

Quote:

Originally Posted by gomer_110

Problem with this setup is that it sucks in air from under the hood which is hot as hell when the car is being run hard. The Stillen G3's draw air from outside the engine bay which is going to be colder.

This is the main reason most go with the Stillen G3's or someother long tube intake. There's plenty of threads on this exact issue so just do a search.

Yeah ive heard of the heatsoak problems of the overheating VHR but im planning on installing a vented hood and hoses from the fangs that force air into the popchargers. The stillens gen 3s lose power when the bumper is covering them and the metal piping gets real hot. Maybe the stillen gen 3s do offer more peak hp but I want to go a different route just to be the first to test.

Nick Servin · 01-10-2015, 04:04 PM

Quote:

Originally Posted by SouthArk370Z

The Popchargers will not increase flow any more than a good OEM-form air filter and will draw in more air from under the hood than the factory setup (see gomer_110's and Nick Servin's comments above). If you want to do any good, you've got to get the coolest air you can. Under the hood is not that place.

The post-MAF tubes will give a little gain but not much. For a DD, not enough to make it worth what they cost, IMNSHO. But they do look nice - if that's your style, go for it.

Yeah I know that the open element filters will suck in hot air. But with air going to the filters and a vented hood I should be alright. The popchargers sound real bad *** on the VQ also.

conquistador · 01-10-2015, 08:26 PM

Someone on the g37 forums dyno'd the popcharger and it lost power across the rpm range. But they look and sound nice...

Chuck33079 · 01-10-2015, 08:45 PM

Quote:

Originally Posted by conquistador

Someone on the g37 forums dyno'd the popcharger and it lost power across the rpm range. But they look and sound nice...

Yep. Short rams are worse than stock given the underhood heat on these cars. Either move the filter out of the engine bay or stick with drop ins and maf tubes.

01-09-2015, 10:19 PM	#3 (permalink)
Merv Track Member Join Date: Dec 2013 Location: Vancouver B.C Posts: 518 Drives: 11 GM grey sport tou Rep Power: 15	Ahhh,is there anything in particular you would like to know? If you go down to the bottom of this page,there's threads that might help you out with what your looking for. Nick Servin likes this. __________________ Swift springs \| upgraded headlights \| stillen gen3 cai \| FI HFC's and FI CBE \| ecutek tune in the mail! Last edited by Merv; 01-09-2015 at 10:21 PM.

01-10-2015, 10:57 AM	#10 (permalink)
gomer_110 A True Z Fanatic Join Date: Aug 2011 Location: Perrysburg, OH Posts: 17,992 Drives: '11 Nismo #528 GM Rep Power: 36941	Problem with this setup is that it sucks in air from under the hood which is hot as hell when the car is being run hard. The Stillen G3's draw air from outside the engine bay which is going to be colder. This is the main reason most go with the Stillen G3's or someother long tube intake. There's plenty of threads on this exact issue so just do a search. SouthArk370Z and Nick Servin like this. __________________ '11 370Z Nismo #528 Fast Intentions \| Stillen \| Motordyne \| Uprev \| CSF \| Zspeed \| Z1 Motorsports \| AST \| Swift \| SPC \| SPL \| Whiteline \| Hotchkis \| Bride \| Schroth \| Robispec \| Cusco \| Nismo \| Volk \| Forgestar \| Hoosier \| RJM '17 Titan Bone Stock

01-10-2015, 12:40 PM	#11 (permalink)
SouthArk370Z Premium Member Join Date: Nov 2010 Location: South Arkansas Posts: 8,435 Drives: 2014 Challenger Rep Power: 324198	The Popchargers will not increase flow any more than a good OEM-form air filter and will draw in more air from under the hood than the factory setup (see gomer_110's and Nick Servin's comments above). If you want to do any good, you've got to get the coolest air you can. Under the hood is not that place. The post-MAF tubes will give a little gain but not much. For a DD, not enough to make it worth what they cost, IMNSHO. But they do look nice - if that's your style, go for it. Chuck33079 and Nick Servin like this. __________________ Steering Lock Links - Search The370Z Bookmarklet - FSM @ NICOclub Mankind has progressed past the need for war but we haven't evolved that far. - NachoMahma

01-10-2015, 08:26 PM	#14 (permalink)
conquistador Base Member Join Date: Sep 2014 Location: CA Posts: 46 Drives: G37 Sedan Rep Power: 11	Someone on the g37 forums dyno'd the popcharger and it lost power across the rpm range. But they look and sound nice... FL 4Motion and Nick Servin like this.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Z1 Post MAF Tubes	MrZ	Intake/Exhaust	47	07-31-2015 04:46 PM
[FOR SALE] z1 post maf tubes	kenny's 370z	Parts for sale (Private Classifieds)	13	10-16-2012 11:22 AM
popchargers vs. stillen gen 3	quicksilver08	Intake/Exhaust	15	08-30-2011 01:08 PM
[FOR SALE] Complete JWT PopChargers ________	kday	Parts for sale (Private Classifieds)	3	07-08-2011 03:14 PM
independent dyno for JWT popchargers anyone?	mattkim85	Intake/Exhaust	1	04-01-2009 08:23 PM

01-09-2015, 10:18 PM	#2 (permalink)
DavidZ370 A True Z Fanatic Join Date: Oct 2013 Location: [= Posts: 1,065 Drives: 17' CWP STI Rep Power: 23	Lol

01-09-2015, 11:12 PM	#7 (permalink)
Zoren 370 A True Z Fanatic Join Date: Mar 2012 Location: FL Posts: 11,018 Drives: 11 Nissan 370 M6 Rep Power: 1913653	Thought about that too..,why not..try it and give us your review.