exhaust tips

Bauran

Hi all! I've searched Google for 4 days trying to find these and I just cant. I am wanting to find 2 each resonated 2.5" inlet 5 -or- 6 inch outlet exhaust tips. Right now the largest I can find s 4" out and I just don't think that will look right.

Want weld on version and brand at this point don't matter but id prefer SS and slant cut.

Or give me idea I haven't though of. I'm building a cbe and I have all the parts picked except for the tips.

But any and all help would be greatly greatly appreciated

ANMVQ

Why would you want a 6 inch exhaust tips.

__________________
14 Q50 AWD, ARK, ECUTEK (SEB), Takda,

TedB370z

I'm fairly sure they don't make any that reduce that far down, you're probably gonna have to get a 4" to 2.5" reducer pipe, and weld that to a 4" inlet/5"outlet pipe....

I cant find any 6" exhaust tips that aren't for trucks.... and they have a 12" length.

Bauran

The stock tips on my nismo are just over 5" unless I just measured wrong, it was dark. So really I'm just trying to match the 5's that are on there. 4" I held up to current and it looked like a baby. But may have to just get 4" I can find them all day long

TerribleONE

They are definitely under 5". Leave the 5-6" tips for the diesel guys.

__________________

vividracing

I think the largest that i have seen someone make the tips for that are the guys at Meisterschaft. They make a 130mm tip (5.11 in) which is the same tip that they use on the GTR. I have had a couple guys on here buy that system for their Nismo, and the 5" actually looks really good.

__________________

speedfreek

You can buy some tips from Motordyne that are 5".

Photo courtesy of Boost Lee. 5" titanium rolled tips.

__________________

vividracing

Meisterschaft Nismo axleback

__________________

Bauran

Like I said it was dark

And thank the rest of you for the info

Hotrodz

Yup, you can get GTR tips from AAM. I have a pair of their GTR ti tips from my old exhaust. They show some use but shot me a PM if you are interested.

Attached Images

20130203_150436.jpg (811.0 KB, 126 views)

__________________
Fast Intentions TT Installed and Tuned by Seb at SpecialtyZ 610whp 560tq:|Fast Intentions 3" TT-TDX|SpecialtyZ/Fast Intentions 72 Row Oil Cooler|SZ 6 Puck Clutch & Flywheel|3GsCustoms|Z1|Wavetrac|Hotchkis|Whiteline |Blitz|Fortune Auto 500|Fujimura|SPL|H&R|TK|TWM|RPM Rollbar|Sparco|Next Level Performance|TrackSpec|AeroFlow Dynamics|Pioneer|

Read T

not enough hello kitty in this thread

__________________
2011 Nissan 370z Black Cherry Sport Pkg - Daily Driver, , 1960 Morgan +4 fun car, 1986 BMW 325ES, 1998 M3 and 1996 Spec Miata - Race Cars
SUPPORT TEAM WINSOME RACING - WRL, CHUMP, LEMONS

Bauran

stock OD on them is 4-3/4, so 5 would be the max I'd be looking for

speedfreek

Motordyne also has SS tips that are 4.5". May be more to your liking. Here are some comparison shots.

__________________

wheee!

FringeXVO makes weld on and slip on tips too.... 5.25"

__________________

Bauran

Thank you speedfreek and wheee! for the info.

Shifting gears a bit I'm finding 3" inlets are easy to find...but I seem to remember reading going over 2.5" dual cbe actually makes you lose power except in turbo/supercharder applications. Can anyone confirm this?

I know I'm never going to boost; so is 3" dual with x pipe a good or bad pursuit?

Right now I have pricing on flanges, flex pipes, 12 & 18 inch resonators, mufflers and with new info a couple options for tips. Shop quotes range from $250 to $450 for them to fab it out of stainless steel.

A cursory research shows bumping all the items to 3" wouldn't raise the material cost by much and in some parts save money.

At the end of the day I want power so that's what my focus is on. With the contacts I have I can save a substantial enough amount to go custom rather than purchasing one that is fab'd by invidia, hks, etc